GE oven igniter replacement typically costs $150-$350 with professional service, averaging about $250; the final price depends on the igniter type, diagnosis, labor, and location. A homeowner replacing a compatible part may spend $25-$80 on the igniter, but service-call fees and access to the burner can raise the total.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed igniter replacement | $150 | $250 | $350 | Typical single-igniter repair |
| Replacement igniter | $25 | $50 | $80 | Part price varies by model and source |
| Service and labor | $100 | $175 | $275 | May include diagnosis and visit fee |
| DIY parts-only repair | $25 | $50 | $100 | Does not include tools or return visits |
Assumptions: One standard GE residential gas oven, typical U.S. labor rates, normal access, and no additional failed components.
What a GE oven igniter replacement usually costs
Most owners pay $150-$350 for a technician to diagnose and replace one oven igniter. A common middle-of-the-range quote is about $250, including a replacement part and labor. High-end totals are more likely in high-cost metro areas, for less common models, or when the repair takes longer than expected.
A quote near $200-$300 is typical for a straightforward, one-part repair. The range assumes the oven has a failed igniter rather than a gas valve, control, wiring, or supply problem. A surface-burner igniter or a different appliance component may have different pricing.
Parts, diagnosis, and labor on a GE gas oven quote
Ask whether the estimate includes the diagnostic visit, part, installation, and any return trip. Some companies credit the diagnostic charge toward the repair; others list it separately. The table shows common line-item ranges, which can overlap depending on the service provider’s pricing structure.
| Quote item | Typical range | What changes the charge |
|---|---|---|
| Igniter part | $25-$80 | Model compatibility, OEM or aftermarket |
| Diagnostic or visit fee | $75-$130 | Location and service minimum |
| Installation labor | $75-$175 | Access, testing, and repair time |
| Extra wiring or connector work | $20-$90 | Damaged terminals or brittle wiring |
| Disposal or trip charge | $0-$40 | Company policy and repeat visits |
Labor and the service minimum often matter as much as the part itself. Technicians may charge a flat repair price rather than itemizing hourly labor.
How model number and igniter type change the estimate
GE gas ovens may use different igniter designs, and a part that looks similar is not necessarily compatible. The model number, typically found around the oven door frame or storage drawer area, helps identify the correct replacement. Confirm whether the quote covers the bake igniter, broil igniter, or another component.
For many standard models, a compatible part costs $25-$80. OEM parts or less common assemblies can reach $90-$150. If both bake and broil igniters need replacement, the parts alone may total $50-$160, with added labor depending on whether the technician charges separately for each repair.
Model-specific compatibility is more important than choosing the cheapest listed igniter. A wrong part can delay the repair or require another service visit.
When slow preheating points to a bigger repair
A weak igniter can cause delayed ignition, long preheat times, or an oven that does not heat, but those symptoms do not prove the igniter is faulty. A technician may test the igniter and inspect wiring, the gas valve, and controls. Diagnosis is commonly $75-$130 when billed separately, though the fee may be credited toward approved work.
If the igniter tests properly, a gas valve or control repair can push the bill beyond the typical replacement range. Ask for the test result and an itemized estimate before authorizing additional parts. Stop using the oven and request service if there is a gas odor; do not try to diagnose a gas leak by operating the appliance.
Confirm the failed component before comparing replacement quotes. Paying for an igniter that is not the cause will not solve the heating problem.
Labor time and access can add to the oven repair bill
A straightforward igniter replacement often takes about 45-90 minutes of on-site work, including basic testing. The billed amount may be higher than the technician’s actual time because it includes travel, scheduling, tools, and a minimum charge. Tight access, seized fasteners, damaged wiring, or an oven built into cabinetry can add time.
At an illustrative labor rate of $75-$125 per hour, one to two hours equals $75-$250 before parts or a separate diagnostic fee. Rates and billing rules differ, so the estimate should clarify whether labor is flat-rate, hourly, or included in a package.
Ask whether the quoted total includes testing the oven after installation. A completed repair should verify reliable ignition and heating, not just installation of the part.
Regional service rates shift GE igniter replacement prices
Labor and service minimums are generally higher in dense, high-cost metro areas than in many rural markets. A metro quote may run roughly 10%-25% above a national-style midpoint, while rural service can be similar or higher if travel is long or appointments are limited. These are directional differences, not guaranteed regional price lists.
For example, a $250 straightforward repair could be about $275-$315 in a high-cost city, while a provider in a lower-cost market might quote $200-$250. Parts pricing may vary less than labor, but shipping, availability, and a special-order model part can affect the total.
Compare local all-in estimates, not just the advertised diagnostic fee. A low visit charge may be offset by higher labor or a separate return-trip fee.
DIY parts-only repair versus professional service
For a person experienced with appliance repairs, a compatible igniter may cost $25-$80, with a less common OEM part reaching $90-$150. Tools or replacement connectors may add $10-$40. Professional service costs more but includes diagnosis, installation, and operational testing, and may include a limited workmanship warranty.
Gas and electrical components require care. The oven should be disconnected from power and the gas supply before work, and the correct model-specific service procedure should be followed. If the connection, wiring, or diagnosis is uncertain, a professional visit can avoid unsafe work or damage.
DIY savings are largest when the fault is confirmed and the correct part is already identified. Otherwise, a mistaken purchase or repeat service call can erase the parts-only savings.
Ways to keep the GE oven repair within budget
Provide the model number, symptoms, and any error codes when booking; this can help the company bring the right part and reduce repeat visits. Request a written estimate that separates diagnosis, parts, labor, and trip charges. Compare two or three local quotes using the same repair scope and ask whether the diagnostic fee applies to the repair.
Skip upgrades unrelated to the fault, but do not substitute an incompatible low-cost part. If the oven is older or has multiple failures, compare the repair quote with the cost of a replacement appliance. A single $200-$300 igniter repair may be reasonable, while a much higher estimate warrants checking the diagnosis and total appliance condition.
Scope control and an itemized quote are the most practical ways to avoid surprise charges. Confirm the final price, warranty terms, and whether taxes or extra parts are excluded before approving the work.