GE Profile microwave prices typically range from about $400 to $2,000, depending on whether the unit is countertop, over-the-range, or built-in. Installation, cabinet work, ventilation changes, and delivery can add $100 to more than $1,000, so the total depends heavily on the model and the condition of the existing space.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| GE Profile microwave unit | $400 | $850 | $2,000 | Countertop, over-the-range, and built-in models differ considerably |
| Basic installation | $100 | $250 | $500 | Existing opening and electrical connections must be suitable |
| Built-in trim kit | $150 | $250 | $400 | May be sold separately for compatible models |
| Removal and disposal | $25 | $75 | $150 | Depends on retailer and local service rates |
| Typical installed project | $500 | $1,100 | $3,000+ | High totals may include cabinet or electrical changes |
What GE Profile microwaves cost by installation type
A GE Profile countertop microwave generally costs $400-$700 before tax. These models need a clear, level counter and a suitable grounded outlet; placing one in a cabinet requires checking the manufacturer’s ventilation clearance rather than assuming it can be enclosed.
Over-the-range GE Profile models commonly run $600-$1,000. They replace a range hood or older microwave and may vent outdoors or recirculate air, depending on the model and kitchen setup. A straightforward replacement often brings the appliance-and-installation total to $750-$1,350.
Built-in models and speed-cooking combinations usually cost $1,000-$2,000 or more. A trim kit, a cabinet opening sized to the model, and professional fitting can push the complete project to $1,400-$3,000+. Assumptions: U.S. retail pricing before sales tax, standard finish, ordinary access, and no major cabinet or wiring changes.
For many buyers, an over-the-range model lands near $850 for the appliance and roughly $1,100 installed. Prices vary by retailer, promotion, capacity, features, and whether the listed price includes a trim kit or installation.
How the appliance, labor, and trim kit shape the quote
The appliance is usually the largest expense, but the installation quote can change quickly if the job includes old-unit removal, a new exterior vent, or cabinet adjustments. Ask whether each line is included in the appliance price or billed separately.
| Quote component | Low | Typical | High | What changes the charge |
|---|---|---|---|---|
| GE Profile appliance | $400 | $850 | $2,000 | Type, capacity, cooking features, and retailer discounts |
| Labor | $100 | $250 | $500 | Replacement versus new installation and access |
| Trim kit or mounting hardware | $50 | $200 | $400 | Model compatibility and built-in configuration |
| Delivery and haul-away | $25 | $75 | $150 | Retailer package, stairs, and removal requirements |
| Vent, electrical, or cabinet work | $0 | $150 | $1,000+ | Existing duct route, outlet location, and opening size |
Basic labor commonly falls around $100-$250 for an uncomplicated replacement. A technician may charge $75-$125 per hour, while a minimum service fee can apply even when the work takes less than an hour.
A quote is easier to compare when it separates the microwave, compatible trim kit, installation, delivery, and disposal. Some retailers bundle installation, while others exclude electrical changes, ductwork, and cabinet modifications.
Capacity, ventilation, and cabinet fit change the price
Capacity and cooking functions explain part of the difference between a basic model and a premium GE Profile unit. A standard microwave with roughly 1.5-2.2 cubic feet of capacity may cost less than a convection or speed-cooking model with added cooking modes and a more specialized installation.
For over-the-range models, check the required width and the distance between the cooktop and the microwave. Many installations use a 30-inch-wide cabinet opening, but model specifications control. If the existing unit is a different width or mounting pattern, new blocking, cabinet repair, or filler work may be needed.
Ventilation is another measurable cost driver. Reusing an existing duct that is correctly sized and routed may add little to a replacement. Switching from recirculating to exterior venting, or moving a duct run several feet through a wall or cabinet, can add about $150-$600; difficult roof or masonry work can cost more.
Built-in units require close attention to the cutout dimensions and airflow clearances. A mismatch of even a few inches can lead to carpentry or trim changes, often adding $100-$500 for routine adjustments. Major cabinet reconstruction is a separate project and can exceed that range.
The cheapest suitable model is the one that fits the existing opening and vent arrangement without costly modifications. Confirm the exact model number and installation instructions before ordering, especially when replacing a built-in or over-the-range appliance.
Where installation scope lets buyers trim the bill
Keeping the replacement within the same installation type usually offers the clearest savings. Replacing an over-the-range microwave with another compatible 30-inch model can avoid cabinet and duct changes; changing to a built-in configuration may require additional trim, carpentry, or electrical work.
Compare the full checkout total rather than the advertised appliance price. A lower sticker price can be offset by delivery, haul-away, an unbundled trim kit, or a separate installer visit. Request written quotes that show each charge and clarify whether the installer will test ventilation and secure the mounting bracket.
Choose features based on actual use. Convection, sensor cooking, and premium controls can raise the unit price, while a straightforward microwave may meet the need at a lower cost. Avoid buying a trim kit until the exact model’s compatibility list is confirmed.
Homeowners can reduce labor time by clearing the counter or range area and confirming the installation site is accessible. They should not disconnect hardwired equipment, alter gas connections, or modify ventilation unless qualified. Preserving the current opening, outlet, and vent path is usually more effective than negotiating a small discount on labor.
Countertop, over-the-range, and built-in prices compared
Countertop GE Profile units have the lowest installation exposure, but they use counter space and may not be designed for enclosed cabinet use. Expect about $400-$700 for the appliance, with $0-$100 for setup or delivery if no mounting or electrical work is required.
Over-the-range models combine microwave functions with a cooktop light and exhaust fan. Their appliance price commonly falls between $600 and $1,000, and typical replacement installation adds $150-$350. If the new unit can reuse the old bracket and vent arrangement, the total may stay near $750-$1,250.
Built-in and speed-cooking products are typically the most expensive choice. A unit priced at $1,000-$2,000 may also need a $150-$400 trim kit and $200-$500 in fitting labor. An unusual cabinet opening or new electrical work can bring the project above $3,000.
Comparing like with like prevents misleading price checks: countertop, over-the-range, and built-in models are not interchangeable by price alone. Confirm that quoted figures cover the same product type, capacity, finish, and included accessories.
How long GE Profile microwave installation takes
A direct replacement of an over-the-range unit often takes one to two hours for a two-person crew, including removal and mounting. A single installer may take longer because the appliance is bulky and must be supported while attached to the bracket.
Countertop setup is usually brief, although delivery and positioning may be charged separately. A built-in installation can take two to four hours when the cabinet opening is ready and the trim kit fits. Cabinet resizing, new ductwork, or electrical changes can require a second trade visit.
At an hourly labor rate of $75-$125, a two-hour task implies $150-$250 before minimum fees or added work. Contractors may quote a flat rate instead, so the hourly calculation is a comparison tool, not a guaranteed invoice amount.
Ask whether the installer’s price includes a second worker, old-unit removal, and testing after mounting. The unit’s weight and location affect safe handling and can change crew requirements.
Regional labor rates and delivery can shift the total
Installation costs tend to be higher in large coastal cities and dense metro areas than in many smaller markets. A basic labor quote may run 10%-25% above a national midrange in high-cost areas, while some rural locations may be 5%-15% lower but charge more for travel or have fewer available installers.
Delivery and access can narrow that gap. Stairs, long carries, limited parking, or a required appointment window may trigger charges of $25-$100 or more. Rural delivery areas can also have higher fees when the retailer or installer travels a long distance.
These are planning adjustments, not fixed regional tariffs. Retail promotions and local labor availability can outweigh broad location averages, so comparing at least two itemized local quotes is more reliable than applying a single national multiplier.
Use the low end for an accessible replacement with standard local labor; budget toward the high end for a metro installation with travel or access charges. Confirm whether the quote includes sales tax, since tax treatment and rates vary by state and locality.
Removal, repairs, and warranty choices add separate charges
Hauling away an old microwave may cost $25-$150, though some retailers include it with delivery. If the old unit is mounted over a range, removal may be part of the installation labor; confirm this rather than paying for overlapping service lines.
Minor cabinet or mounting repairs can add $75-$300. Replacing a damaged outlet or correcting a small wiring issue may cost about $100-$300, while a new dedicated circuit or substantial electrical work can exceed $500. New exterior ducting typically costs more than reusing a compatible existing route.
Extended protection plans vary by retailer and coverage length, often costing roughly $75-$250 for several years. Review exclusions, service fees, and whether the plan duplicates coverage already provided by the manufacturer or a payment card. A protection plan does not reduce the purchase price and is not required for installation.
Separate necessary code or fit corrections from optional protection plans and cosmetic upgrades. When an existing microwave has a limited fault, a repair diagnosis may cost $75-$150 before parts; compare the complete repair estimate with a replacement unit and installation, particularly for an older appliance.