The Graco 390 paint sprayer price varies by kit, condition, and included accessories, with cost drivers centered on setup, pressure rating, and add-ons. In typical U.S. purchases, buyers see a price range that reflects new units, refurbished options, and freight or tax changes. This article outlines exact price ranges, per-unit figures where relevant, and practical ways to budget for a Graco 390 sprayer.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Graco 390 sprayer (new kit) | $450 | $600 | $900 | Base unit with hoses and just-in-time accessories |
| Refurbished Graco 390 | $300 | $420 | $620 | Certified refurbished with limited warranty |
| Extras (tip set, filters, cups) | $20 | $40 | $120 | Per set; varies by kit |
| Pressure hose and whip | $25 | $60 | $110 | Quality hoses affect longevity |
| Primer/liners and fluid (optional) | $15 | $40 | $100 | Depends on material and usage |
| Shipping/Tax | $0 | $25 | $60 | Region dependent |
Assumptions: Midwest labor rates, standard Graco 390 configuration, normal access to work areas, consumer-grade coatings.
Typical total cost for a Graco 390 Sprayer kit
Buyers usually pay $450-$900 for a complete Graco 390 sprayer setup, new or nearing new condition. The average commonly lands around $600, with higher-end kits or expedited delivery pushing toward $900. For a refurbished unit, expect $300-$620. This block covers the core unit, basic hose, a standard nozzle set, and a starter fluid sample when included by the seller.
Price breakdown by components: Materials and Labor
A standard quote splits into materials and labor. Materials typically range $280-$520 depending on hoses, tip sets, filters, and seals. Labor to assemble, test, and tune the sprayer often runs $90-$180 for a quick setup, and could be higher if on-site calibration is required. The attached table shows 4 key columns for quick comparison.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (hoses, tips, seals) | $280 | $420 | $520 | Quality parts affect spray consistency |
| Labor (assembly + testing) | $90 | $140 | $180 | Includes purge and initial spray test |
| Equipment tax/fees | $0 | $20 | $60 | Depends on state |
| Delivery/handling | $0 | $20 | $60 | Regional variability |
Assumptions: On-site setup within a typical home shop, standard 3- to 6-hour job window.
Which components most influence the Graco 390 price
Largest price drivers are the core unit condition, hose quality, and tip options. If the sprayer is new, expect higher base pricing; refurbished units save 15-45%. Upgrading to premium hoses or specialty tip sets can add $40-$150 per upgrade. Region and shipping add another $0-$60 on average.
Variables that most affect final quotes
Two numeric drivers consistently shift quotes: unit condition and kit scope. Condition categories include new, factory-reconditioned, and refurbished, with new often adding 30-60% to the price of refurbished equivalents. Scope variations such as including an extended tip kit, pressure regulator, or quick-connect fittings can raise the total by $40-$120. The installed height or access distance can also add travel or setup time costs exceeding $20-$50.
Ways to reduce the Graco 390 sprayer price without sacrificing results
Carefully compare how much you need versus what comes in the kit. Consider buying a refurbished unit with a limited warranty, selecting standard hoses and tip sets, and skipping optional high-end accessories if they aren’t essential for your project. Scheduling delivery during off-peak periods can trim shipping or rush charges. Bundling maintenance parts with a single purchase often yields a small discount.
Regional price differences for Graco 390 in the U.S.
Prices vary by region due to freight and demand. The Northeast may see a higher base price plus $20-$40 shipping, while the Southeast might offer lower freight. Midwest regions often align with national midpoints, and the West can carry a surcharge of $10-$50 on certain sellers. A typical spread is about 15% between high- and low-cost markets.
Labor time, crew size, and setup for Graco 390
Typical setup involves a single technician for 2-4 hours on a home project. Per-hour rates range $75-$125 depending on the region and contractor experience. Larger homes or commercial spaces can require a small crew for 4-8 hours, raising total labor to $300-$1,000 for the job, not including material costs.
Replacement vs repair: when pricing shifts long-term
If the sprayer suffers recurring seal leaks or worn pistons, replacement often competes with or exceeds repair. A full replacement kit might cost $450-$900, while a repair may range $100-$300 for parts and $80-$180 for labor. Long-term maintenance, including frequent nozzle and filter changes, affects total ownership cost more than a one-time purchase.
Cost at a glance: quick table for comparison
| Scenario | Low | Average | High | Notes |
|---|---|---|---|---|
| New Graco 390 sprayer kit | $450 | $600 | $900 | Base unit with standard accessories |
| Refurbished 390 sprayer | $300 | $420 | $620 | Certified refurbished options |
| Upgraded hose & tips | $40 | $100 | $170 | Better flow and finish |
| On-site setup labor | $90 | $140 | $180 | Single tech, 2-4 hours |
Assumptions: Midwest labor rates, standard spray coatings, normal access.