A new Graco Mark V airless sprayer typically costs about $5,500-$7,500, with many standard contractor packages near $6,500. The final price depends on the package, seller, included hose and gun, freight, and whether the machine is new, refurbished, or used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Mark V package | $5,500 | $6,500 | $7,500 | Price varies by package and dealer |
| Used machine | $2,000 | $3,500 | $4,500 | Condition, age, and service history matter |
| Optional delivery | $75 | $175 | $350 | Residential freight may cost more |
| Typical repair visit | $150 | $350 | $700 | Parts and diagnostic scope affect total |
What a new Graco Mark V costs by package
For a new Mark V, a practical budget is $5,500-$7,500 before any applicable sales tax. The lower end may reflect a basic configuration or dealer discount; higher-priced packages can include additional accessories, upgraded components, or freight. The average estimate of $6,500 assumes a standard professional package from a U.S. seller.
Used units commonly list for $2,000-$4,500, but a low asking price is not proof that the pump or electrical components are sound. A machine needing a major pump repair can erase much of the savings. Compare the complete package and service condition, not just the advertised machine price. Assumptions: U.S. dealer pricing, standard Mark V package, before sales tax and job-specific accessories.
Which items make up the Mark V quote
The equipment itself accounts for most of the purchase price. Accessories, freight, and tax can add a noticeable amount, while labor applies mainly when a technician services or repairs the sprayer rather than when a buyer simply purchases it.
| Quote item | Typical range | What changes the charge |
|---|---|---|
| Sprayer and standard package | $5,500-$7,500 per unit | Model configuration and seller |
| Hose, gun, and tip accessories | $150-$600 per set | Length, gun type, and included items |
| Freight or delivery | $75-$350 per order | Distance and residential delivery |
| Sales tax | About 0%-10.5% | Buyer location and tax rules |
| Repair labor | $90-$150 per hour | Shop rate and diagnostic time |
Ask the seller to itemize accessories, freight, and tax so competing quotes can be compared on the same basis.
Mark V package, used unit, or smaller sprayer
A used Mark V at $2,000-$4,500 can be a lower-cost route for a buyer who can verify operating condition and obtain parts or service. A new package at $5,500-$7,500 costs more upfront but generally offers a clearer warranty path and known condition. Warranty terms vary by seller and product configuration, so they should be confirmed in writing.
A smaller airless sprayer may cost roughly $500-$2,000, but it is not a like-for-like substitute for larger or heavier-duty work. The right comparison depends on the coating, required output, and frequency of use. Do not compare purchase prices without checking that both machines suit the same materials and job demands.
How hours, accessories, and condition change the total
On a used machine, operating history and maintenance records can matter more than appearance. Ask for a test under pressure, check for leaks, and confirm that the motor and controls run normally. A repair estimate can range from a few hundred dollars for limited service to $700 or more when multiple parts or substantial labor are needed.
Accessory costs also vary with the job. A longer hose, replacement spray gun, or several tips can add approximately $150-$600, depending on brand and specification. Freight may rise for remote delivery or special handling. Count the accessories already included before budgeting for replacements or upgrades.
How much should a Mark V repair visit cost
For a service visit, shops may charge $150-$350 for basic diagnosis and limited work, while extensive repairs can total $350-$700 or more. Labor rates commonly fall around $90-$150 per hour, with replacement parts billed separately. The symptom, parts availability, and whether the unit needs cleaning or deeper pump work affect the estimate.
Before authorizing repair, request a written breakdown of diagnostic fees, labor hours, and parts. Compare that total with the cost of a used replacement in verified condition. Repair is easier to justify when the machine has a known history and the quote stays well below replacement cost.
Where Mark V prices run higher across the U.S.
Regional differences usually show up in freight, dealer availability, and local taxes rather than a fixed national price schedule. Buyers in major metro areas may see more competing sellers, while rural locations can face higher delivery charges or fewer service options. As a planning estimate, a delivered quote may run about 3%-8% above a comparable local pickup price.
Sales tax can add 0%-10.5%, depending on the delivery address and applicable rules. Compare the total delivered amount, not a pre-tax online listing. Request quotes using the same package, delivery terms, and tax assumptions.
Three Mark V budgets for common buying situations
A new standard package priced at $6,300 plus $150 freight and 7% tax would total about $6,902. A used unit listed at $3,200 with a $300 inspection or initial service allowance and $150 delivery would require roughly $3,650 before tax. A repairable used unit listed at $2,400 plus a $650 repair estimate and $150 delivery would come to about $3,200 before tax.
These examples are budgeting scenarios, not guaranteed dealer quotes. Local tax, package contents, and the actual repair findings can change the totals. For a used purchase, reserve money for inspection and likely wear items rather than spending the full budget on the listing price.
Ways to lower the Mark V purchase price
Compare at least three sellers using the same configuration, then ask whether freight, accessories, and warranty coverage are included. Consider dealer floor models or inspected used machines, but obtain the service record and written return terms. Avoid paying extra for accessories that are already included or are not needed for the planned coating work.
When evaluating a used unit, arrange a demonstration or inspection before payment. If a repair quote is high, compare it with a tested used machine and a new package rather than relying on the seller’s estimate alone. The strongest savings come from controlling package scope and confirming condition before purchase.