The Graco TradeWorks 170 airless paint sprayer typically costs about $250-$500 when available as new old stock, while used units often sell for $125-$300. The final price depends on condition, included hose and gun, seller, and whether the model is still supported or replaced by a newer sprayer.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used TradeWorks 170 | $125 | $225 | $300 | Working unit; condition and accessories vary |
| Refurbished or serviced | $225 | $325 | $400 | Price depends on service and seller warranty |
| New old stock | $300 | $400 | $500 | Availability and included accessories affect asking price |
| Common replacement parts | $15 | $60 | $180 | Filters, tips, hoses, or repair components |
What a TradeWorks 170 usually costs to buy
For a complete, working machine, a reasonable budget is $225-$400 before tax. New old stock may cost more because the TradeWorks 170 is an older model and listings can be limited; a used unit without a verified spray test should cost less. Condition and completeness matter more than the seller’s original retail-price claim.
Check whether the listing includes the spray gun, hose, tip, filters, suction tube, and any storage or cleaning accessories. A bare or untested machine may need $30-$150 in parts or repair work, so a low sticker price is not necessarily the lowest total cost.
Assumptions: U.S. online and local resale pricing, standard working condition, and no unusual shipping or repair needs.
How the gun, hose, and repair parts change the quote
For a used sprayer, the purchase price is only part of the budget. Missing components, worn seals, and a clogged or damaged fluid path can add expense. The following ranges are typical parts-and-service allowances, not a guaranteed price for a specific seller or repair shop.
| Quote item | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Spray tip or filter | $15 | $30 | $55 | Replacement wear item |
| Gun or hose replacement | $40 | $85 | $160 | Price varies by part and compatibility |
| Seals or small repair parts | $20 | $55 | $120 | Parts only; labor may be extra |
| Shop diagnosis or service | $50 | $100 | $200 | Inspection and basic repair allowance |
| Shipping and tax | $10 | $35 | $75 | Depends on distance and seller |
Ask for a complete-parts list and a recent spray test before treating a used price as an all-in deal. Confirm that replacement parts fit the exact model rather than assuming components from another Graco sprayer will work.
Which pressure, tip, and condition details move the price?
Age and wear can outweigh the advertised specifications. A unit that starts, primes, holds pressure, and produces an even fan is worth more than one sold as untested. A worn pump, leaking packing, or inconsistent pressure can turn a $150 purchase into a repair project.
Tip condition also affects value. A used tip with an irregular spray pattern may need replacement, commonly $15-$55 depending on type. Check the model plate and included tip size against the planned coating; a tip suited to thin paint may not be appropriate for every product. Require a live demonstration with the intended type of material when possible.
Included hose length, gun condition, and filtration parts matter as well. Missing accessories may add $40-$160 or more, while a machine with documented service and useful original components can justify a higher asking price.
How much do TradeWorks 170 listings vary by region?
Used equipment is often cheaper where local listings are plentiful and pickup avoids shipping. In major metro areas, asking prices can run roughly 5%-15% above a comparable rural listing, but competition and availability can reverse that pattern. Shipping a bulky sprayer may add $25-$75, and damage risk makes local pickup attractive.
Prices for new old stock are less tied to local labor rates and more affected by seller inventory. Online sellers may charge 10%-20% more than a local used listing for a similar machine, especially when they offer returns or a limited warranty. Compare the delivered, tax-included price rather than the headline listing price.
Three realistic TradeWorks 170 purchase budgets
Basic local pickup: A tested machine with gun, hose, and one usable tip may cost $175-$250. Allow another $15-$40 for a replacement filter or tip, putting the pre-tax total near $190-$290.
Serviced resale unit: A cleaned and demonstrated sprayer with a short seller warranty may list for $275-$375. Add $20-$50 for shipping or local delivery when applicable, for an estimated $295-$425 before tax.
Untested bargain: A machine advertised for $100-$175 may need $50-$200 in diagnosis, parts, or shop labor. At a service rate of $75-$125 per hour, even a small repair can erase the savings.
When should a buyer pay extra for a newer sprayer?
A newer or current-production airless sprayer may cost more upfront but can be easier to support with parts and warranty service. Compare the TradeWorks 170’s complete price with current entry-level alternatives, often roughly $300-$600, and verify flow capacity, compatible tips, and intended use rather than comparing brand names alone.
For a one-time small project, a used TradeWorks 170 may make financial sense if it works and includes the necessary accessories. For frequent use, uncertain condition or hard-to-find parts can make a newer model a better value. Compare expected repair spending and parts availability, not just purchase price.
Which checks keep a used sprayer’s price down?
Ask the seller to demonstrate priming, pressure control, and a consistent spray pattern. Inspect the hose for cracks, the gun for leaks, and the suction parts for damage. Confirm which accessories are included in writing and request the model number before ordering parts.
Compare at least three complete listings with similar condition, accessories, and return terms. Set a maximum total budget that includes tax, shipping, and likely wear parts; avoid paying a new-old-stock premium for a unit that has no return option or service history. A modest discount is prudent when the machine cannot be tested.