A Graco TX90 texture sprayer typically costs about $1,600-$2,700 new, with a representative purchase price near $2,100 before tax and delivery. The final price depends on whether the listing is for the sprayer alone or a package, plus seller, condition, included accessories, and local availability.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New TX90 sprayer | $1,600 | $2,100 | $2,700 | Price varies by seller and package contents |
| Used TX90 sprayer | $700 | $1,200 | $1,800 | Condition, service history, and accessories affect value |
| Replacement setup parts | $50 | $250 | $600 | Wear parts or several accessories, not a full sprayer |
| Rental, when available | $75/day | $125/day | $200/day | Local rental inventory and terms differ |
What a new Graco TX90 sprayer usually costs
For a new Graco TX90, budget roughly $1,600-$2,700 for the machine, with about $2,100 a practical midpoint for a standard purchase. The low end generally assumes a competitive seller price or a basic configuration; higher quotes may reflect a package, shipping, limited availability, or accessories included with the unit. Since listings may differ in exactly what is supplied, buyers should compare the parts list rather than the headline price alone.
A sensible initial budget is $2,100-$2,500 before tax when the listing and included equipment have been verified. State and local sales tax can add roughly 0%-10% depending on location and tax treatment. Freight or delivery may add around $50-$250, especially when the machine is shipped rather than collected locally. Confirm whether the quoted price includes the spray hose, gun, tips, hopper, and any setup items needed for the intended work.
Product availability can change, and sellers may list new, used, refurbished, or older-stock equipment under similar search terms. The TX90 name alone does not establish that a listing is new or that every package contains the same accessories. Buyers should request the model identification, condition, warranty terms, and a written breakdown before paying.
Assumptions: U.S. retail pricing, a standard TX90 purchase, no unusual freight charge, and sales tax excluded unless stated.
Which equipment and delivery charges appear on TX90 quotes
The sprayer itself is only one part of the purchase decision. A complete quote may combine the machine, application components, shipping, and consumables. The ranges below are planning estimates; accessory prices vary by compatibility, seller, and whether parts are sold individually or as a kit.
| Quote component | Typical range | What to verify | Cost effect |
|---|---|---|---|
| TX90 machine | $1,600-$2,700 | New, used, or refurbished condition | Largest share of the purchase |
| Gun, hose, and fittings | $100-$450 | Included parts, length, and compatibility | Can be extra on bare-machine listings |
| Tips and spray accessories | $25-$200 | Tip sizes and texture application needs | May require additional purchases |
| Delivery or freight | $0-$250 | Pickup option and residential delivery fees | Depends on distance and carrier |
| Tax and setup supplies | $0-$300 | Local tax and required consumables | Location and first-job requirements affect total |
Compare the complete usable setup price, not just the advertised machine price. A $1,800 listing without a needed hose or gun could cost more than a $2,050 package that includes the right components. Ask the seller to itemize what ships with the sprayer and identify any parts that are missing, worn, or sold separately.
Texture material is usually a job expense rather than part of the machine price. The amount depends on the surface, coverage, finish, and product instructions, so a seller’s equipment quote should not be treated as including material for a project. Buyers should also check whether the included setup suits the texture and work area before ordering replacement parts.
How hopper capacity and included accessories change the price
Two TX90 offers can differ substantially even when both advertise the same model. A complete, lightly used machine with service records and compatible accessories may be worth more than a lower-priced unit that needs repairs. Conversely, a high asking price is not automatically justified by a few add-ons; each accessory should be identified and priced against the buyer’s actual use.
Verify the exact model and hopper configuration against the manufacturer’s documentation or a knowledgeable dealer. Capacity, hose length, gun configuration, and compatible tips affect how the sprayer fits a job, but listings sometimes omit these details. A buyer should not assume that a particular hopper size, motor specification, or accessory is included solely from a product photo.
Condition and completeness often shift the TX90’s real value by several hundred dollars. For a used machine, inspect the hopper for cracks, check that controls and connections are present, and look for residue or signs of poor cleaning. Ask whether the seller has tested it under operation and whether the purchase includes a return period or parts warranty.
For a quote comparison, list the machine, hose, gun, tips, required fittings, delivery, and tax separately. If a dealer offers a package with extra accessories, compare the package against the cost of purchasing only the items required for the planned texture. Avoid paying for equipment that cannot be confirmed as compatible or that duplicates tools already on hand.
How much operator time and setup add to a TX90 job
Buying the sprayer is a capital expense; labor to use it is separate. A small, straightforward texture application may require several hours of setup, masking, spraying, and cleanup, while larger or more complex interiors can take a full workday or longer. Access, surface preparation, drying requirements, and the number of rooms make a greater difference than the machine price alone.
For paid installation work, a broad U.S. planning rate for a skilled drywall or texture worker is around $50-$100 per hour, though local contractor rates can fall outside that range. A two-person crew working 6-10 hours at $50-$100 per labor hour per worker represents roughly $600-$2,000 in labor before materials, travel, and overhead. This is a labor illustration, not a quoted market rate for every texture job.
Keep machine ownership, operator labor, and project materials as separate budget lines. The sprayer does not eliminate time for protecting floors and openings, mixing material, checking spray consistency, moving hoses, or cleaning equipment. A job requiring extra masking or multiple texture passes can cost more even when the equipment purchase is unchanged.
Rental can make sense when the machine is needed for a single short project, but local availability and rental terms matter. A rough planning range is $75-$200 per day, with deposits, damage waivers, late-return charges, and cleaning requirements potentially increasing the bill. Confirm that the rental includes the necessary gun and hose, and ask whether the rate is daily, weekend, or weekly.
New, used, or rental TX90 equipment for a short project
A new TX90 at $1,600-$2,700 offers a known purchase condition and may include seller or manufacturer warranty coverage, subject to the actual terms. A used unit at roughly $700-$1,800 costs less upfront but transfers more condition risk to the buyer. A one-day rental around $75-$200 avoids ownership and storage, although repeated rental days can quickly approach the price of a used machine.
| Buying choice | Planning price | Typical trade-off |
|---|---|---|
| New machine | $1,600-$2,700 | Higher initial spend; confirm warranty and included parts |
| Used machine | $700-$1,800 | Lower cost; condition and repairs need careful review |
| Daily rental | $75-$200 per day | Low commitment; availability and fees vary locally |
Compare total expected use, not just the first-day price. For multiple jobs, ownership may be economical if the machine is in good condition and can be maintained. For one small project, rental may be cheaper, particularly when pickup is nearby and the rental includes the required accessories. A used purchase is less attractive if it needs a costly repair or lacks essential components.
Before buying used, request a demonstration, inspect the machine, and document the included parts. Ask when it was last used and cleaned, whether it has been repaired, and whether the seller will accept a return if it fails a basic operating check. For a rental, inspect the equipment before leaving and document existing damage to avoid disputes over deposit deductions.
Why TX90 prices differ by seller and U.S. region
There is no single national retail price that every buyer will find. Large construction-supply markets may have several dealers competing on price, while remote areas can face fewer sellers and higher freight charges. As a rough budgeting adjustment, delivered prices in less competitive or remote markets may run about 5%-15% above a comparable local pickup quote. This is a planning range, not a fixed regional surcharge.
Urban dealers may have better access to stock but charge for delivery or offer less discount when demand is high. Rural buyers may save by picking up equipment at a regional supplier, but travel costs and limited inventory can offset the savings. Online listings may appear cheaper, yet shipping, sales tax, restocking terms, and return freight can change the final amount.
Request at least two itemized quotes using the same machine condition and accessory list. Compare the pre-tax equipment total, delivery, warranty, return policy, and lead time. A quote that is $100 lower may not be cheaper overall if it excludes an accessory or requires expensive freight. For used equipment, compare condition and service history rather than applying new-equipment regional pricing to an older unit.
Stock levels and seller promotions also affect offers. A dealer clearing older inventory may quote below a seller with limited supply, but buyers should confirm that the equipment is complete and that warranty eligibility is clear. If a quoted TX90 price is far below the usual range, verify the seller, model identity, condition, and payment protections before proceeding.
What to inspect before paying for a used TX90
A used sprayer’s lower asking price can be outweighed by missing parts, poor cleaning, or repair needs. The difference between a ready-to-use unit and one needing service may run from a modest parts bill to several hundred dollars, depending on the fault and availability of components. Ask a repair shop or dealer for a diagnosis when the seller cannot demonstrate operation.
Check the motor and controls, connections, hose, gun, hopper, and any supplied tips or fittings. Look for visible cracks, leaks, damaged cords, heavy material buildup, or evidence that the sprayer was stored wet or dirty. Confirm that included accessories are appropriate and that replacement parts remain available for the exact model.
Price a used TX90 by its verified condition, not by its original retail price. A machine listed at $1,200 may be a reasonable buy if it runs properly and includes the necessary equipment; the same price may be excessive if it needs a hose, gun, or repair. Set aside roughly $100-$400 for possible wear parts or service on an older unit, while recognizing that significant repairs can exceed that allowance.
Ask for the serial or model identification and any maintenance or repair records. Get the seller’s description of condition in writing and clarify whether the sale is final. If a demonstration is possible, observe startup and operation, and make sure the equipment is clean enough to evaluate rather than relying only on photographs.
Ways to lower the TX90 purchase without buying the wrong setup
Start by defining the work: expected number of jobs, texture type, access constraints, and which accessories are already available. Then request a quote for the base machine and a separate price for each add-on. This prevents bundled equipment from obscuring the sprayer’s actual price and helps reveal whether a package is genuinely less expensive than buying only the needed parts.
Choose the least expensive complete setup that meets the job specification. A bare machine can be a false economy if required components must be bought separately, while an oversized accessory bundle adds expense without improving the planned work. Compare new, used, and rental options using the full amount paid, including freight, tax, deposits, and any expected service.
- Ask local dealers about pickup pricing, package contents, and in-stock alternatives before accepting a freight quote.
- Compare two or three itemized offers with the same condition, accessories, delivery terms, and warranty coverage.
- Consider used equipment only after confirming operation, included parts, and likely repair costs.
- Rent for a short, isolated job when the complete rental charge is meaningfully below ownership cost.
- Avoid buying duplicate hoses, guns, or tips unless compatibility or condition requires replacement.
Timing can help, but waiting for a discount is not guaranteed to reduce the total. A seller may offer a lower price on older inventory, while limited stock can raise the cost or delay a project. The most reliable savings usually come from controlling package scope, minimizing delivery expense, and checking condition before purchase.
For a straightforward buying decision, use about $2,100 as a midpoint for a new standard TX90, then add verified delivery and tax. For used equipment, compare the asking price with the cost of a tested, complete setup rather than relying on a low headline number. The right budget depends on condition, accessories, region, and how often the sprayer will be used.