The Graco Ultra Max 795 is a popular handheld spray system for home projects, with pricing driven by kit contents, pressure setup, and where it’s purchased. This guide breaks down current price ranges, typical add-ons, and practical ways to estimate total costs for a U.S. buyer.
Assumptions: standard household use, Midwest to Southeast pricing, standard replacement parts, no bulk commercial discounts.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Ultra Max 795 sprayer kit | $180 | $210 | $260 | Base model with spray gun and 515 tip set |
| Additional spray tips (per tip) | $10 | $15 | $25 | Typically 311, 415, 515 sizes |
| Hose length upgrade | $25 | $40 | $70 | 10–25 ft options common |
| Replacement seals and filters | $8 | $15 | $30 | O-rings, interchangeable filters |
| Labor for setup/priming (per hour) | $45 | $65 | $85 | In-home prep by a handyman or contractor |
| Delivery/fees | $0 | $10 | $25 | Dependent on retailer |
Graco Ultra Max 795 Price Range by Kit and Accessories
Typical total price spans from $180 to $260 for standard home kits. The price depends on included accessories, such as extra spray tips, a longer hose, and a carry case. Higher-end bundles may push toward $260, especially when bundled with multiple tips and a larger hose. Assumptions: standard 1.0–1.5-gallon per minute setup, consumer-grade coatings, and normal regional retail pricing.
Component-Level Cost: Core Sprayer, Tips, and Hoses
The core sprayer unit usually costs between $180 and $210. Tip upgrades and hose extensions add $25–$70 to the subtotal depending on length and number of tips included. Expect a single-purpose kit with two additional tips to land near the average, while a premium kit with three or more tips and a 25 ft hose can reach the high end.
Spare Parts and Accessories: Seals, Filters, and Kits
Replacement accessories typically cost $8 to $30 per item. A routine seal and filter refresh for a season usually runs around $15 total. Budget for at least two replacement seals per year for heavy use.
Labor for Setup, Priming, and Cleanup
In-home setup and priming work commonly ranges from $45 to $85 per hour, depending on local labor rates and access to the work area. A straightforward, same-day job often requires 1–2 hours, whereas complex projects or scheduling delays can push to 3 hours. Factor in setup time when estimating total cost for a painting project.
Delivery, Taxes, and Local Fees
Delivery is often waived for online orders above a threshold, but sometimes ranges from $0 to $25. Local taxes can add several dollars to the subtotal. Expect a small regional delta in price due to tax policy.
Region-Based Price Variations Across the U.S.
Prices typically skew higher in urban regions and coastal states due to logistics and demand. In suburban Midwest markets, the base kit commonly lands around $200, while Northeast metro areas may see $220–$260 with add-ons. Regional pricing deltas often amount to 5–15%.
System Type and Pump-Pressure Differences
The Ultra Max 795 supports high-pressure operation for thicker coatings. A system with enhanced pressure regulation features or a longer hose can push costs up by about $20–$50. System type influences both upfront price and coating efficiency.
Quantity and Frequency: One-Time DIY vs. Seasonal Fixes
For a single DIY project, the price range remains centered around the standard kit plus a couple of tips. For seasonal use (repainting multiple rooms), budget toward mid-range kits and extra tips, raising the total by roughly $40–$90. Longer use justifies investing in a larger tip set and hose length.
Estimated Totals for Common Project Scenarios
- Small room priming and finish coat (one spray task): $210–$250
- Two-room interior with multiple coatings: $230–$290
- Exterior siding job with multiple coatings and longer hose: $260–$320
Warranty and Long-Term Cost Considerations
Graco components typically include limited warranties, but extended protection or retailer-provided service plans can add $10–$25 per month in some markets. Include warranty cost in total ownership planning.
Practical Ways to Reduce the Price Without Sacrificing Quality
Control scope by choosing a single-scope kit with essential tips, plan installs during non-peak weeks, and compare prices across retailers. Bundling accessories you already need often yields small savings per item.