A new Gravely Pro-Turn with a 60-inch deck typically costs about $11,000-$16,000 before tax, with an estimated average near $13,500. Model series, engine, dealer setup, delivery, local labor rates, and whether the mower is new or used can shift the final price substantially.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New 60-inch mower | $11,000 | $13,500 | $16,000 | Price varies by Pro-Turn series and engine |
| Used 60-inch mower | $4,000 | $7,500 | $11,000 | Condition, age, and hours matter |
| Dealer delivery and setup | $100 | $250 | $500 | May be included in a promotion |
| Annual service allowance | $250 | $450 | $800 | Routine maintenance and wear items |
New Gravely Pro-Turn 60-inch mower prices
For a new machine, budget roughly $11,000-$16,000 before sales tax. Entry and mid-range Pro-Turn configurations tend to fall toward the lower or middle part of that range, while higher-spec commercial models, premium engines, and added suspension or comfort features can push the quote upward. The average planning figure is about $13,500.
Most buyers should compare the exact model number, engine, and included setup rather than treating every 60-inch Pro-Turn as the same mower. Dealer pricing can differ from advertised MSRP, and seasonal discounts may change the out-the-door amount. Assumptions: U.S. dealer purchase, new mower, standard 60-inch deck, no trade-in, and tax excluded.
What the dealer quote includes beyond the deck
A written estimate should separate mower price from delivery, setup, accessories, and tax. Commercial dealers commonly inspect and assemble the mower before handoff; some include this work, while others list it as a charge. Optional items such as a mulching kit, suspension seat, or spare blades can add to the initial bill.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Mower and 60-inch deck | $11,000-$16,000 | Per mower | Series, engine, and features |
| Dealer setup and inspection | $0-$250 | Per mower | Dealer policy and assembly needs |
| Delivery | $50-$300 | Per trip | Distance and access |
| Mulching kit or blades | $150-$500 | Per kit or set | Deck configuration and parts |
| Sales tax | Varies by locality | Local tax rate | Purchase location and taxable fees |
Ask whether the quote includes setup, delivery, and the first service so add-ons do not make dealer offers look cheaper than they are. For a financed purchase, compare the total of payments and fees as well as the advertised price.
How engine choice and deck width change the price
The 60-inch deck is a common commercial configuration, but model series and engine equipment affect the quote more than deck width alone. A 60-inch mower with a basic commercial engine may cost several thousand dollars less than a higher-tier model with a more powerful engine and added operator comfort features. Confirm engine make, rated horsepower, and warranty coverage on the specific unit.
Deck size also matters when comparing a 60-inch mower with nearby sizes. A 52-inch deck may have a lower purchase price, while a 72-inch option may cost more and may not suit narrow gates or tight landscaping. Choose deck width around actual mowing access and acreage, not just the lowest advertised price. A larger deck can reduce mowing time on open ground but offer little value where obstacles require frequent trimming.
Model availability and product specifications can change, so the model year should be stated on the dealer quote. Verify whether the stated price is for a current unit, a prior-year mower, or a special package. A prior-year machine may be discounted, but compare its warranty start date and included accessories.
Dealer labor, delivery, and setup charges
Dealer preparation is usually a modest part of the total compared with the mower, but delivery distance and service work can raise it. A local delivery may run $50-$150, while longer trips or difficult access can reach $300-$500. Ask if fuel, unloading, and a brief operating demonstration are included.
For repairs or aftermarket installation, shop labor commonly runs about $90-$150 per hour, with a one-hour minimum at some service departments. Adding a kit may take about 1-2 hours, so labor could add $90-$300 beyond parts.
Separate optional service work from required setup, and get labor hours and hourly rates in writing. Warranty work should be distinguished from paid maintenance because the dealer’s diagnosis and warranty rules determine what the owner owes.
Do Midwest and coastal dealer prices differ?
Regional differences typically come from dealer competition, freight, taxes, and local demand rather than a uniform regional surcharge. A reasonable planning allowance is about 3%-8% above a competitive baseline in high-cost metro or coastal markets. In rural areas, the mower’s listed price may be similar, but delivery and service travel can add $100-$400.
Tax can make the out-the-door difference larger than the equipment quote itself. For example, a $13,500 mower incurs $810 in tax at 6%, compared with $1,080 at 8%, before taxable accessories or fees. Compare the same model and options using an out-the-door quote from at least two nearby dealers.
Used Pro-Turn 60 prices by age and condition
Used 60-inch Pro-Turn mowers commonly list around $4,000-$11,000. Older machines with high hours, cosmetic wear, or repair needs may fall near $4,000-$6,000; cleaner, newer units with documented service can reach $8,000-$11,000. These are broad asking-price estimates, not guaranteed sale values.
Before buying, check engine hours, hydrostatic drive performance, deck condition, spindle noise, tire wear, and maintenance records. A mower that needs tires, blades, belts, or deck repairs can require $300-$1,500 soon after purchase. Price a used mower after inspection and subtract known repairs from the seller’s ask. Confirm the serial number and ask whether any remaining warranty transfers.
Lower the 60-inch purchase price without cutting essentials
Compare quotes on identical model numbers and avoid paying for accessories that are not needed for the mowing plan. A mulching kit is useful for a specific grass-management approach, but it is not automatically necessary; standard blades may be sufficient. Ask about prior-year inventory and dealer demonstration units, then inspect hours, condition, and warranty status before accepting a discount.
Trade-in value can reduce the cash due, but it is not the same as a lower mower price. Request both a purchase quote without a trade and a separate trade allowance. Keep the comparison focused on total cost, warranty, and needed equipment rather than monthly payment alone. For a small property or narrow-access site, a less expensive 52-inch mower may be more practical than buying a 60-inch deck that cannot pass through gates.