Gutter repair and cleaning cost typically runs $150-$450 for a combined visit, though extensive damage or a large, hard-to-reach roof can push the bill above $1,000. Price depends on gutter length, debris, access, material, and whether the job involves simple resecuring or replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Gutter cleaning | $100 | $200 | $400 | Typical one- or two-story home |
| Minor repair | $100 | $250 | $600 | Leak sealing or hanger replacement |
| Combined cleaning and repair | $150 | $350 | $900 | Varies with length and repair scope |
| Per linear foot | $0.75 | $1.50 | $3.50 | Cleaning; repair work may be extra |
Typical gutter cleaning and repair prices by home size
For a one-story home with 120-160 linear feet of accessible gutters, cleaning often costs $100-$225. A two-story house with 160-220 feet typically costs $175-$350, while steep roofs, three-story access, or heavy blockages can raise cleaning to $400 or more. Minor repairs commonly add $100-$300; larger sections or repeated leaks can bring combined work to $600-$1,200.
A standard combined visit averages about $250-$450 for an average-size home with routine debris and limited repairs. These ranges assume common aluminum gutters and normal ladder access; local rates and roof conditions change the quote. Assumptions: U.S. standard labor rates, ordinary debris, no major fascia or roof damage.
What cleaning, labor, and repair parts add to the quote
Quotes may include a service minimum even when the home has limited gutter footage. Cleaning usually covers debris removal and a basic water-flow check; repairs are priced separately when they require materials, extra ladder moves, or replacement sections.
| Quote item | Typical price | Common scope | Cost note |
|---|---|---|---|
| Cleaning labor | $0.75-$3.50 per linear ft | Remove leaves and flush downspouts | Height and buildup affect rate |
| Labor rate | $50-$100 per worker-hour | On-site service and repair | Minimum charges may apply |
| Hangers and fasteners | $2-$8 per unit | Secure loose gutter runs | Labor often costs more than parts |
| Sealant or corner repair | $75-$250 per location | Seal joints and end caps | More if the metal is corroded |
| Gutter section replacement | $8-$20 per linear ft | Remove and install standard aluminum | May exclude fascia repairs |
Labor, access, and the number of repair points usually matter more than the price of small replacement parts. A labor estimate can be checked with ; ask whether the quoted rate includes setup, cleanup, and downspout flushing.
How gutter length, height, and damage change the estimate
Gutter length is a major pricing input: a 100-foot ranch is generally less expensive to service than a 220-foot two-story home. At $0.75-$3.50 per linear foot, the cleaning portion can differ by several hundred dollars before repairs are added. A home with more than 200 feet may receive a per-foot rate, while small jobs can be subject to a $100-$175 minimum.
Height and condition can push the same footage into a different price tier. Second-story work often adds 20%-40% compared with easy, one-story access; third-story sections or steep roof pitches can add more. Minor leaks at one or two joints may cost $75-$250 each, but sagging runs over 10 feet, rotted fascia, or multiple detached sections may require $300-$900 or more in repairs.
Why labor time varies between one-story and two-story homes
A crew of one or two workers may spend 1-3 hours cleaning a straightforward home and another 1-4 hours on small repairs. Heavy wet leaves, packed downspouts, roof valleys, and frequent ladder repositioning extend the visit. At $50-$100 per worker-hour, an additional two hours for a two-person crew can add roughly $200-$400 before materials.
Ask for the expected crew size and whether the estimate is flat-rate or hourly. Flat pricing makes comparison easier when the job is well defined; hourly pricing may be reasonable for unknown damage, but the estimate should include a not-to-exceed amount or approval step before extra work begins.
Regional gutter service rates from suburbs to city centers
Labor markets and housing styles create regional differences. In lower-cost rural or Midwestern markets, routine service may fall near the lower end of the ranges, while dense Northeast and West Coast cities often run 15%-35% higher. A difficult urban site with limited parking or restricted ladder access can cost more than a suburban home even at the same gutter length.
Compare quotes from contractors serving the same local market, not national averages alone. Regional adjustments are estimates rather than fixed rules: travel charges, local wages, season, and the prevalence of multistory homes all affect actual bids.
Extra charges for downspouts, guards, and fascia damage
Clearing a clogged downspout may add $50-$150 per downspout when flushing or disassembly is needed. Gutter guards can add $1-$3 per linear foot for cleaning if debris must be removed from or around them. Disposal is often included, but a separate debris haul-away fee may be $25-$75; difficult access, a service call minimum, or urgent scheduling can add $50-$200.
Fascia rot is a separate carpentry issue, not simply a gutter repair. Replacing damaged fascia can add $6-$20 per linear foot, depending on board material, paint, and access. Have the contractor identify any excluded roof-edge work before authorizing a gutter-only repair.
Three sample quotes for common gutter jobs
| Job and scope | Labor assumption | Estimated total |
|---|---|---|
| One-story, 140 linear ft; cleaning and one resealed corner | 2 workers, 1.5 hours | $175-$325 |
| Two-story, 190 linear ft; cleaning and 8 replaced hangers | 2 workers, 2.5 hours | $300-$550 |
| Two-story, 220 linear ft; cleaning, downspout clearing, and 20 ft replaced | 2 workers, 4-6 hours | $650-$1,100 |
These examples assume standard aluminum gutters and no hidden fascia damage. A quote should specify footage, repair locations, materials, cleanup, and any exclusions so the totals can be compared on equal terms.
Lower the gutter bill by controlling repair scope
Request separate prices for cleaning, sealing, hanger replacement, and new gutter sections. That makes it easier to defer nonurgent work without paying for a broad, undefined repair package. If only one short section is damaged, compare a localized replacement with replacing an entire run; matching color and profile may affect that decision.
Routine cleaning can prevent debris-related overflow, but it does not justify unnecessary upgrades. Clear accessible ground-level areas of stored items before the crew arrives, schedule nonurgent work outside peak leaf-fall demand when practical, and compare at least two itemized local quotes. Confirm that each quote covers downspouts and disposal before choosing the lowest price.