A Haas Garage Door 600 Series typically costs about $1,000-$2,600 for the door alone, or $1,700-$4,000 installed for a standard residential opening. Size, window and hardware choices, old-door removal, and local labor rates can move a quote well beyond the average.
For budgeting, a basic installed single door often lands near $2,400, while a double door commonly costs $3,200 or more.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Single door, door only | $1,000 | $1,600 | $2,600 | Typical 8-by-7-foot opening; configuration affects price |
| Double door, door only | $1,700 | $2,500 | $3,800 | Typical 16-by-7-foot opening |
| Single door, installed | $1,700 | $2,400 | $4,000 | Includes standard installation; extras may cost more |
| Double door, installed | $2,500 | $3,500 | $5,500 | Assumes an existing, usable frame and ordinary access |
Assumptions: U.S. dealer pricing for a residential insulated steel door, standard colors, and a conventional installation. Haas dealers set final prices, and options vary by model and market.
What a 600 Series Door Costs By Opening Size
The installed ranges above assume a standard-height opening and no major framing changes. A single door is usually less expensive because it uses fewer panels and requires less handling; a double door has a larger material package and may need stronger springs and hardware. Actual dimensions, track arrangement, insulation configuration, and finish determine the dealer’s product quote.
Compare quotes using the same opening dimensions and listed options, not just the 600 Series name. A door-only quote may exclude tracks, springs, weather seals, delivery, and installation, so it should not be compared directly with a turnkey quote.
How Panels, Tracks, And Labor Shape The Quote
A contractor quote generally combines the door package with installation and any removal or site work. The table gives practical ranges; component prices are estimates, not a Haas list price, and may be bundled rather than itemized.
| Quote component | Typical price | How it affects the total | Common basis |
|---|---|---|---|
| Insulated door sections and finish | $1,000-$3,800 | Largest product charge; size and options matter | About $10-$24 per sq ft |
| Tracks, springs, and hardware | $150-$500 | May be included in a package | Per opening |
| Installation labor | $300-$800 | More for large doors or difficult access | $75-$125 per hour |
| Removal and disposal | $75-$250 | Depends on old door and disposal fees | Per door |
| Delivery or local trip charge | $50-$250 | Distance and dealer policy affect the fee | Per order |
Ask whether the written price includes the spring system, weather stripping, haul-away, tax, and adjustment after installation. Those details can explain a several-hundred-dollar gap between otherwise similar bids.
Which 600 Series Options Raise The Installed Price
Door area is a major driver: a 16-by-7-foot opening has twice the face area of an 8-by-7-foot opening, though the full installed price does not necessarily double. Custom widths, taller openings, special colors, decorative hardware, and window layouts can add product and handling costs. A high-lift or unusual track setup may also require additional parts or labor.
Window placement and glazing type can change the package price, as can upgraded hardware or a particular exterior design. Confirm the selected model and options with a Haas dealer because availability and specifications depend on the product configuration. Get the exact model, color, window count, and insulation details written into the quote.
When Old-Door Removal Or Framing Adds Extra Charges
Removing a standard door often adds about $75-$250, but multiple doors, heavy sections, or difficult disposal can raise the charge. Rot at the jambs, an out-of-square opening, damaged framing, or inadequate headroom may require carpentry before installation. Minor repairs may add roughly $150-$500; substantial framing work should be separately scoped rather than hidden in a door allowance.
Door replacement usually does not include a new opener. If the existing opener is incompatible, worn, or not included in the project, a replacement commonly adds about $350-$800 installed, depending on drive type and features. Separate door, opener, electrical, and framing work on the estimate so optional work is not mistaken for the base price.
How U.S. Location Changes A Dealer’s 600 Series Price
Local labor and delivery can shift the installed total. As a broad budgeting adjustment, high-cost coastal metros may run about 10%-25% above a national middle-market estimate, while some rural markets may be 5%-15% below it. These are planning deltas, not guaranteed regional price lists; limited dealer availability or long delivery routes can make a rural quote higher instead.
Labor availability, local disposal charges, sales tax, and the dealer’s service territory matter more than a state average. Request two or three local written bids when possible and compare taxes, removal, hardware, and warranty terms separately. A lower product price may not be the lower installed price if delivery or labor is excluded.
Three Installed Quote Examples For Common Openings
These examples show how a 600 Series budget can vary with size and scope. They assume standard installation and no structural repairs; final dealer pricing depends on selected options and location.
| Scenario | Door and scope | Labor assumption | Estimated total |
|---|---|---|---|
| Basic single | 8-by-7-foot door, standard finish, no removal | 3-4 hours at $75-$125 per hour | $1,700-$2,700 |
| Single with windows | 8-by-7-foot door, window option, old door hauled away | 4-5 hours plus removal | $2,200-$3,500 |
| Double replacement | 16-by-7-foot door, standard package, old door removed | 5-7 hours plus disposal | $3,000-$5,000 |
These totals are quote-planning ranges, not guaranteed prices or published Haas rates. An estimate that falls outside them may still be reasonable if it identifies premium options, difficult access, or repair work.
Ways To Cut The 600 Series Bill Without Sacrificing Fit
Keep the opening dimensions and track layout unchanged when the existing setup is sound. Choose a standard color and simpler window configuration if appearance options are driving up the product quote. If the current opener works with the new door and meets applicable safety requirements, ask whether it can remain rather than replacing it automatically.
Get bids with matching specifications, and ask for separate prices for removal, disposal, framing repairs, and optional upgrades. Scheduling during a less busy period may improve contractor availability, though savings are not assured. Prioritize correct sizing, balanced springs, and complete installation over cosmetic extras that can be added later.
Questions To Ask Before Accepting A Haas Dealer Quote
Ask whether the price covers the door sections, tracks, springs, installation, delivery, and cleanup. Confirm the proposed opening size, model configuration, finish, window placement, and any insulation claim in writing. Request the warranty terms for the door and installation, and check whether service calls or adjustments are included.
Also clarify whether the quote includes tax, old-door haul-away, opener work, and repairs to framing. A deposit and lead time may vary by dealer and selected configuration. A complete line-item quote makes it easier to compare the installed price and avoid unexpected charges.