Hanex solid surface typically costs about $55-$110 per square foot installed, with many standard kitchen countertop projects landing around $2,000-$4,500. Sheet price, countertop area, edge details, sink work, labor rates, and removal of old counters shape the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Hanex material | $25/sq ft | $38/sq ft | $55/sq ft | Fabricator pricing varies by color, thickness, and sheet yield |
| Installed countertop | $55/sq ft | $80/sq ft | $110/sq ft | Typical fabrication and installation, excluding major extras |
| Small kitchen, 30 sq ft | $1,650 | $2,400 | $3,300 | Basic layout and standard edge profile |
| Average kitchen, 45 sq ft | $2,475 | $3,600 | $4,950 | Price rises with seams, cutouts, and removal |
For a standard kitchen, templating often takes one visit, followed by fabrication that may take several business days and a separate installation appointment. On-site fitting commonly takes 4-8 hours for a basic kitchen; complex seams, several rooms, or a large island can extend installation to 8-12 hours or require a larger crew.
When contractors charge labor separately, a broad planning range is $50-$100 per worker per hour, though many shops price fabrication by the job or square foot instead. The labor total depends on shop work as well as time in the home, so an hourly rate alone does not reveal the full cost.
Stairs, narrow hallways, long carries, or limited parking can add $100-$500 or more if extra handling or crew time is required. Cabinet tops that are out of level may need shimming or adjustment, commonly adding $100-$400 for modest corrections. Extensive cabinet repair is usually a separate carpentry expense.
Confirm whether the quote includes the template visit, delivery, standard leveling, and return trips. A site that is not ready for installation can lead to rescheduling charges, while plumbing reconnection may require a separate plumber and often adds $150-$400.
How Hanex prices shift between U.S. regions
Regional prices vary with wages, fabricator competition, freight, and project demand. As a rough comparison, installed rates in lower-cost rural markets may run 5%-15% below the national midrange. Large coastal metros and high-cost cities can be 10%-25% above it, especially when access is difficult or shop calendars are full.
Using a $80-per-square-foot midpoint, a 40-square-foot countertop would estimate near $3,200 before extras. A comparable rural quote might come in around $2,720-$3,040, while a high-cost metro quote could reach roughly $3,520-$4,000. These are illustrative adjustments, not guaranteed local rates; material availability and the shop’s minimum charge can outweigh the regional percentage.
Small jobs are particularly sensitive to minimums. A fabricator may charge a fixed amount for measuring, transport, and installation that makes a small vanity cost more per square foot than a full kitchen. For an accurate local comparison, request at least two written estimates based on the same measurements and scope.
Use local quotes to set the budget, and treat regional percentages only as a screening tool. Rates can differ between neighborhoods in the same metro area because of parking, building rules, travel time, and crew access.
When removal, backsplash, and custom edges add extra charges
Old-counter removal is commonly priced at $5-$15 per square foot, or about $200-$700 for many kitchens. Heavy stone, difficult access, and a need to protect cabinets can push removal above that range. Haul-away may be included or charged separately, so the quote should state whether disposal is covered.
A matching Hanex backsplash may cost about $15-$35 per linear foot installed, depending on height and seam details. Full-height wall panels cost substantially more because they use more material and require careful templating. Standard eased or simple rounded edges may be included, while decorative or built-up profiles can add $15-$35 per linear foot.
Other possible charges include a cooktop cutout at roughly $100-$300, a drainboard or routed groove at $150-$500, and a custom integrated sink or basin at $300-$900 or more beyond a basic top. Exact pricing depends on the shop’s fabrication method and whether the sink is supplied with the countertop.
Request separate prices for each upgrade instead of accepting one unexplained allowance. This makes it possible to keep useful items, such as a needed backsplash, while removing decorative work that has little value for the specific kitchen.
Hanex versus laminate, quartz, and other solid surfaces
Hanex is an acrylic solid surface, so it can usually be fabricated with inconspicuous seams and repaired or refinished more readily than many stone surfaces. Its installed price of roughly $55-$110 per square foot often overlaps entry-level quartz, but local quotes and included edge work can change which option costs less.
Laminate is typically the lower-cost choice at about $25-$60 per square foot installed. It can suit a tight budget, but seams and surface damage may be harder to repair invisibly. Midrange quartz often runs around $65-$125 per square foot installed; it resists many everyday stains but generally cannot be refinished in the same way as acrylic solid surface.
Other acrylic solid-surface brands can offer similar construction and pricing, often around $50-$110 per square foot installed. Compare the exact color, sheet thickness, sink options, warranty terms, and fabricator experience rather than assuming two products are interchangeable. A premium Hanex color or detailed fabrication can cost more than a basic competing surface.
Compare complete installed scopes, not just material prices. For a fair comparison, use the same square footage, sink arrangement, edge profile, backsplash height, removal allowance, and tax treatment for every bid.
Which Hanex choices can lower the countertop estimate
Keeping the existing cabinet layout is one of the strongest ways to control cost. Moving a sink or cooktop may require new cutouts, plumbing or electrical work, and additional seams. A simple perimeter layout, standard depth, and a readily available color can reduce waste and fabrication time.
Choose a standard edge rather than a built-up or decorative profile, and limit extra openings to fixtures that are actually needed. If the existing counter can be removed safely by the homeowner, ask whether the fabricator allows customer removal and whether that changes the quote; some installers require professional removal to protect cabinets and manage liability.
Obtain two or three estimates from shops that regularly fabricate Hanex. Give each the same measurements and request itemized pricing for material, labor, cutouts, backsplash, removal, delivery, and tax. Confirm the measurement visit and final dimensions before ordering, since a mistake after fabrication can be costly.
Prioritize standard specifications and a complete written scope before negotiating the total. A quote that saves $300 but omits disposal or sink installation may end up more expensive than a fully scoped alternative.