Harman coal stove prices typically range from about $800 for a used unit to $6,000 or more for a new or dealer-stock stove with installation. Model, condition, venting, electrical work, delivery, and local labor rates drive the final price; many Harman coal models are older or sold through limited dealer inventory.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used stove only | $800 | $1,800 | $3,500 | Price depends on model, condition, and included parts |
| New or dealer-stock stove | $2,500 | $4,000 | $6,000+ | Limited availability; confirm the exact model and warranty |
| Installation | $700 | $1,500 | $3,000+ | Existing chimney and site work affect labor |
| Installed project | $1,500 | $4,500 | $9,000+ | Higher totals may include venting, hearth, and electrical upgrades |
Assumptions: U.S. prices in USD; ordinary access and a residential installation. Local quotes and available inventory vary.
What Harman coal stoves cost by model and condition
For a used Harman Mark I or similar hand-fired unit, a typical stove-only budget is $800-$1,800. Larger Mark II or Mark III units may list for $1,200-$3,500, depending on firebrick, grates, doors, and visible wear. These are asking-price ranges, not a guarantee that parts are complete or the stove is ready to burn.
Harman stoker models, including the Magnum and DVC-500, can cost more because of their feed systems and controls. Used examples often run roughly $1,500-$3,500; new, unused dealer inventory may be priced around $3,500-$6,000 or higher. Confirm the model, production status, included components, and warranty before comparing a listing with a current stove quote.
Many coal models are discontinued or uncommon, so advertised prices can vary sharply with regional supply. A low listing may exclude the hopper, motor, controls, or vent parts.
How stove, venting, and labor shape the installed quote
A complete estimate separates the stove from installation and site work. The table gives typical planning ranges; a difficult chimney route or extensive code corrections can exceed them.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Stove and feed components | $800-$6,000+ | Per unit | Model, condition, and availability |
| Venting and connector pipe | $300-$1,500 | Per project | Pipe type, height, and chimney condition |
| Installation labor | $500-$1,800 | Usually 6-14 hours | Removal, access, and vent routing |
| Hearth or floor protection | $200-$900 | Per installation | Required dimensions and material |
| Electrical work or parts | $100-$600 | Per project | Outlet location and control-system needs |
Labor can be estimated as . At about $75-$125 per hour, 8-12 hours of stove work would be $600-$1,500 before travel, removal, or specialty services. Ask whether the quote includes delivery, startup, old-stove removal, and inspection fees.
Used Mark stoves versus Harman stoker models
Hand-fired Mark stoves generally have a lower purchase price and simpler operating equipment, but the buyer must manage loading and tending. Stoker models cost more and add powered feed and control components. A used stoker with an untested motor or control board can require repairs that erase its apparent discount.
Before paying, inspect the firebox, welds, grates, doors, seals, and firebrick. For a stoker, request a demonstration of the feed motor, combustion blower, and controls. Replacement-part availability differs by model and age. A written condition report and a parts list are more useful than comparing sticker prices alone.
Firebox size and vent route can raise the price
Model capacity and installation conditions affect both purchase and project cost. A smaller stove may suit a compact area, while a larger unit can cost more and require a larger hearth or more clearance. Have the installer verify the stove’s specifications against the room and local requirements rather than sizing from square footage alone.
Venting is a major cost variable. A short connector into a sound, suitable chimney may keep materials near $300-$700. A new or relined flue, a longer route, or repairs to a masonry chimney can push venting toward $1,500-$3,000 or more. Electrical needs also differ, especially for powered stoker equipment. Get the chimney and electrical scope assessed before accepting a stove-only price as a project budget.
What delivery, removal, and chimney repairs add
Heavy-stove delivery commonly adds about $100-$400 locally, with stairs, long carries, or difficult access increasing the charge. Removing an existing stove may add $150-$500; disposal can cost extra. A chimney inspection or cleaning is often quoted separately, commonly around $150-$400 depending on access and service scope.
Older homes may need floor protection, clearance adjustments, a new thimble, or chimney relining. These are not always included in basic installation rates. Request separate line items for required safety work and optional upgrades, and check whether permits or inspections are required by the local building department.
Regional labor and inventory change Harman pricing
Coal-stove inventory is concentrated in areas where solid-fuel heating is common. In the Northeast and parts of Appalachia, more dealers or used listings may improve selection, though high demand can still raise prices. In areas with fewer qualified installers, labor and delivery can run roughly 10%-25% above a comparable rural-market quote.
Urban jobs may add about 10%-20% for access, parking, or longer service visits; remote locations can carry travel charges. These are planning differences, not fixed regional rates. Compare quotes for the same model, venting scope, and startup service to make regional prices meaningful.
Three Harman coal stove quotes to compare
| Example | Scope | Estimated total | Included work |
|---|---|---|---|
| Used Mark I | $1,200 stove; 7 labor hours | $2,300-$3,400 | Basic connector, hearth allowance, delivery |
| Used Mark III | $2,200 stove; 10 labor hours | $3,800-$5,500 | Installation, minor vent updates, startup |
| Dealer-stock stoker | $4,500 stove; 12 labor hours | $6,500-$9,000+ | Venting allowance, electrical work, delivery |
These examples assume no major chimney reconstruction, unusual access, or extensive removal. They illustrate how stove price and project scope combine; a local site visit is needed for a firm estimate.
How to lower the installed Harman stove price
Compare at least three written estimates using the same model and installation scope. Ask whether a used stove has been test-fired and whether essential motors, grates, controls, and seals are included. A lower purchase price is less useful if the stove needs unavailable parts or substantial repair.
Keep the existing compliant chimney when an installer confirms it is suitable, and avoid paying for cosmetic upgrades that do not improve safe operation. Scheduling nonurgent work outside peak heating demand may improve installer availability. Prioritize verified condition, correct venting, and complete parts over the lowest advertised stove price.