A used Hearthstone Heritage 8021 wood stove typically costs about $800-$2,500, while a professionally installed setup can bring the total to roughly $2,500-$7,500. Price depends on condition, included parts, chimney requirements, local labor, and whether the stove is complete and suitable for the home.
The 8021 is an older model, so most buyers should expect used or refurbished pricing rather than a dependable new-retail price. The ranges below distinguish the stove itself from installation and related work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Hearthstone Heritage 8021 | $800 | $1,600 | $2,500 | Working condition; price depends on completeness and wear |
| Refurbished or dealer-inspected stove | $1,800 | $2,800 | $4,000 | Availability varies; confirm what service or warranty is included |
| Basic professional installation | $1,500 | $3,000 | $5,000 | Assumes a compatible existing chimney and modest connection work |
| Stove plus typical installation | $2,500 | $4,600 | $7,500 | Does not include major chimney reconstruction |
What a Heritage 8021 Usually Costs Used
For the stove alone, a practical U.S. budget is $800-$2,500 for a used Heritage 8021 in working condition. Around $1,400-$1,900 is a reasonable middle range when the stove is complete, has no obvious structural damage, and can be inspected before purchase. Exceptional cosmetic condition or documented refurbishment may push an asking price higher.
Condition and completeness matter more than a high asking price: a sound, inspectable stove is generally a safer value than a cheap unit with missing parts. Check the firebox, door, hinges, glass, air controls, baffle, firebrick, and soapstone panels. Damage or missing components can turn a low purchase price into a costly repair project.
Because the 8021 is an older model, listings are irregular and regional. Some sellers may use “Heritage” without clearly identifying the model. Ask for a photograph of the rating plate and verify the model before comparing prices. A current or later Heritage stove is not automatically interchangeable with an 8021, and a newer model’s retail price should not be treated as the 8021’s value.
Assumptions: U.S. private-party or used-dealer sale, stove only, no delivery or installation.
How Stove, Chimney, and Labor Charges Add Up
The stove purchase is only one part of the project. Installation may require a listed chimney system, connector pipe, floor protection, clearances, a hearth extension, delivery, and an inspection. An installer should assess the proposed location and venting before the buyer commits to an older stove.
A compatible existing chimney can keep the total near the lower end; a new chimney or code-related changes can add several thousand dollars. The table gives planning ranges, not a substitute for a site-specific quote.
| Quote item | Typical price | Unit or scope | What changes it |
|---|---|---|---|
| Used 8021 stove | $800-$2,500 | Per stove | Condition, included parts, seller, and documentation |
| Connector pipe and fittings | $200-$700 | Per connection | Pipe length, diameter, elbows, and finish |
| Chimney liner or new venting | $800-$3,500 | Typical residential run | Height, access, liner type, and existing chimney condition |
| Installation labor | $500-$1,800 | Typical straightforward job | Stove weight, access, hearth work, and crew requirements |
| Hearth or floor protection | $250-$1,200 | Per installation | Required dimensions and chosen material |
| Delivery and disposal | $100-$600 | Per job | Distance, stairs, handling, and removal of old equipment |
Installation labor is often quoted as a flat project charge. Where an hourly estimate is provided, a planning range is about $75-$150 per technician hour, but crew size and minimum charges affect the total.
Assumptions: Typical U.S. residential work; permit fees, taxes, and major masonry repairs may be additional.
Which 8021 Parts and Site Conditions Raise the Quote
Stove condition can change the purchase and repair budget substantially. A replacement glass panel, door gasket, or firebrick may be a manageable expense, while cracked soapstone, damaged cast components, or a distorted firebox can make the stove uneconomical to restore. Parts availability for an older model should be confirmed before purchase.
Have a qualified stove professional inspect the appliance and confirm that required parts are obtainable before paying a premium for refurbishment. Ask the seller to identify repaired or replaced parts in writing and to explain whether the price includes testing or a limited warranty.
Chimney height and route are important cost drivers. A short, accessible run that connects to a suitable existing chimney usually costs less than a taller system passing through multiple floors or a roof. A liner that is the wrong diameter or in poor condition may need replacement even if the chimney looks sound from the room.
Installation details can also alter the estimate. A level, noncombustible hearth and adequate clearances may allow a straightforward placement; a combustible floor, tight alcove, nearby trim, or uneven masonry can require extra protection or relocation. For planning, quotes may rise by $500-$2,000 or more when hearth modifications, difficult access, or additional venting work is needed.
Before installation, confirm the stove’s rating plate, listing and installation instructions, required clearances, and local code requirements. An older appliance may not meet current requirements in every jurisdiction, and insurance or local inspection rules can affect whether it can be installed.
How Far Does the 8021 Budget Stretch in Different Regions
Labor and chimney work vary by market. In many rural areas with established wood-heat contractors, a straightforward installation may be about 10%-20% below a large-city quote, though limited contractor availability can erase that difference. Dense metro markets and high-cost coastal regions may run 15%-30% above a national planning estimate for labor and delivery.
Regional differences apply most strongly to labor, delivery, and chimney work, not to the stove’s underlying condition. Used-appliance prices depend heavily on local supply: an area where wood heat is common may have more listings, while a scarce model can command a higher asking price without being in better shape.
For a simple installation with a usable chimney, an overall budget of roughly $2,500-$4,500 may be possible in a lower-cost market. In a high-cost market, the same scope can reach $4,000-$6,500. A new chimney, liner replacement, or major hearth work can exceed these ranges in either location.
Get quotes that identify the same scope. One estimate may include a liner and permit while another covers only setting the stove and connecting pipe. Comparing totals without checking those inclusions can make a higher but more complete quote appear unnecessarily expensive.
How Long Installation Takes and What Labor Covers
A basic replacement in a prepared space often takes one workday, commonly about 4-8 hours for a small crew. A new chimney run, roof work, masonry changes, or difficult access can extend the project to 1-3 days. Scheduling may take longer during fall and early winter, when stove installers are busiest.
Ask whether the labor price includes setup, connection, clearances, startup checks, and cleanup. A low installation quote may exclude chimney inspection, floor protection, or removal of an existing stove. The installer should also state who handles permits and any required inspection.
Stove weight and handling can affect crew size and delivery charges. Confirm that the access route, stairs, doorway width, and final location are workable before delivery. A failed delivery or extra handling visit can add approximately $100-$400, depending on distance and labor.
Labor estimates should identify whether the existing chimney is being inspected and whether any liner work is included. If the installer cannot verify the venting condition until an on-site inspection, request a written base price plus clearly described possible additions.
Repairing an 8021 Versus Buying Another Stove
Repair can make sense when the 8021 is structurally sound, the issue is limited, and replacement parts are available. Small service items may cost roughly $100-$500 for parts and labor, depending on the repair and local rates. More involved work, such as replacing damaged panels or addressing firebox problems, can cost $500-$1,500 or more.
Compare the stove’s purchase price plus inspection, repairs, and installation against the cost of a different listed stove that fits the same chimney and room. A $700 stove needing $1,000 in parts and special handling may be a poorer buy than a more complete unit priced higher.
A newer stove can cost several thousand dollars before installation, but may offer current documentation, a dealer warranty, and easier parts support. A used alternative may be less expensive upfront, yet still require a liner, hearth changes, and professional inspection. Compare complete installed budgets rather than stove-only prices.
Do not assume that the 8021 qualifies for incentives or meets current emissions rules. Eligibility and installation requirements depend on the specific appliance, local regulations, and program terms. Verify those details with the relevant local authority or utility before counting a rebate toward the budget.
Three Example Quotes for Different 8021 Projects
The examples below show how the purchase price and site scope combine. They are estimates for comparison, not guaranteed local quotes, and assume the stove is serviceable.
| Project | Stove and materials | Labor and other work | Estimated total |
|---|---|---|---|
| Used stove, sound existing chimney | $1,200 stove; $350 connector and hearth supplies | $900 installation; $150 delivery | $2,600 |
| Dealer-inspected stove, liner replacement | $2,600 stove; $1,500 liner and fittings | $1,300 labor; $250 inspection and delivery | $5,650 |
| Lower-priced stove, new chimney and hearth changes | $900 stove; $2,800 chimney and $700 hearth materials | $1,800 installation; $300 delivery and removal | $6,500 |
The chimney and installation scope can outweigh the difference between a low-priced and higher-priced used stove. Each example assumes ordinary access and excludes major structural repairs, taxes, and any unexpected code upgrades.
When requesting quotes, provide the model number, photos of the rating plate and stove, chimney dimensions, room location, and pictures of the hearth and access path. Ask each contractor to separate appliance, venting, labor, delivery, permit, and inspection charges. This makes estimates easier to compare and helps expose missing work before installation begins.
Ways to Lower the Heritage 8021 Purchase and Install Price
Set a maximum all-in budget before negotiating. Reserve money for inspection, parts, delivery, and venting instead of spending the full amount on the stove. A reasonable contingency is about 10%-15% of the expected project total when the chimney or appliance condition is not yet confirmed.
The most reliable savings come from verifying condition early and avoiding surprise scope changes. Request clear photos, verify the model, inspect the stove in person when practical, and get a professional opinion on questionable damage before paying. Ask for an itemized list of included accessories and repairs.
Keep the installation in its existing approved location when that avoids extra chimney length, roof work, or hearth reconstruction. Compare standard connector options that meet the stove’s requirements rather than paying for decorative upgrades. Do not reduce required protection or skip inspection to save money; those shortcuts can create safety and compliance problems.
Compare at least two or three written installation quotes with matching scope, and ask whether scheduling outside the fall rush affects the price. If a seller is far away, compare the delivery charge with local listings before arranging transport. A lower purchase price can disappear quickly when the stove requires long-distance hauling or missing parts.
Finally, ask whether a repairable defect is included in the price or can be resolved before sale. A modest discount may not cover uncertain damage, while a documented repair and a complete parts list can justify paying more for a stove that is ready for professional assessment.