A Hearthstone Tribute 8040 typically costs about $2,500-$4,000 for the stove if it is available, while a complete installation commonly brings the project total to $4,000-$8,500. Final pricing depends on whether the model is new or used, the condition of the chimney, installation labor, and required venting or hearth work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Tribute 8040 stove | $2,500 | $3,250 | $4,000 | New or remaining dealer inventory; availability varies |
| Stove with standard installation | $4,000 | $6,000 | $8,500 | Assumes a suitable existing chimney or straightforward liner work |
| Used stove only | $800 | $1,600 | $2,500 | Price depends on condition, age, and included parts |
| Chimney liner | $800 | $1,400 | $2,500 | Installed stainless-steel liner; height and access affect cost |
Assumptions: U.S. pricing in dollars, standard residential access, and no major structural repairs. Local quotes and model availability can differ.
What a Tribute 8040 stove and installation usually cost
The 8040 is a compact Hearthstone wood stove with soapstone panels, and its price should be distinguished from the cost of getting it safely installed. A typical stove-only budget is $2,500-$4,000 for new or remaining inventory. Because this is an older model, new stock may be limited; a dealer may quote a different amount for floor stock, a refurbished unit, or a comparable current model.
For a complete project, many homeowners should plan on $4,000-$8,500. That range can cover the stove, delivery, installation labor, connector pipe, and a basic chimney liner where needed. A job that can use an existing, code-compliant chimney may land near the lower end. A new insulated chimney, difficult roof access, or hearth construction can push the total higher.
Used listings may appear cheaper, but the purchase price does not establish that a stove is complete, serviceable, or suitable for a particular chimney and home. Ask for the model and serial information, inspect firebricks, door seals, glass, and soapstone, and price any missing components before comparing a used unit with dealer inventory.
How stove, liner, and hearth charges shape the quote
Installation estimates divide into the appliance, materials, labor, and site-specific work. The table gives common ranges for a straightforward residential installation; it is not a promise that every contractor includes each line item. Confirm which parts, removal tasks, and inspections are included before comparing totals.
| Quote item | Typical price | What changes the charge | Common unit |
|---|---|---|---|
| Tribute 8040 stove | $2,500-$4,000 | Inventory, condition, included accessories | Per stove |
| Connector pipe and fittings | $250-$700 | Pipe length, diameter, elbows, finish | $50-$150 per piece |
| Stainless-steel chimney liner | $800-$2,500 | Chimney height, insulation, access | $50-$100 per linear ft installed |
| Installation labor | $700-$1,800 | Crew size, setup, connection complexity | $75-$150 per hour |
| Hearth pad or floor protection | $200-$1,200 | Required dimensions and finish material | $10-$40 per sq ft |
| Removal and disposal | $150-$600 | Old stove weight, stairs, disposal rules | Per job |
A chimney sweep or inspection may add $100-$300, while repairs to a damaged flue can add substantially more. Some installers include a basic site assessment in the installation quote; others charge separately.
Which firebox, chimney, and site details raise the price?
The existing chimney is often the largest variable after the stove itself. A sound, correctly sized masonry flue may need only inspection and connection work. A flue that is oversized, unlined, deteriorated, or incompatible with the appliance can require a stainless-steel liner, insulation, or repairs. A liner run of 15 feet, for example, will usually cost less than a 30-foot run with difficult access.
Room layout and clearances matter, too. A stove placed near an existing fireplace may need a different connector arrangement from one installed in a freestanding location. Extra elbows, a longer horizontal run, or a need to pass through a wall or ceiling can increase material and labor charges. The installer should verify the appliance instructions and applicable local code rather than assume that an existing hearth or chimney meets requirements.
Hearth dimensions and surface materials can also affect the budget. A small, compliant noncombustible pad may cost a few hundred dollars; a larger stone or tile hearth can cost over $1,000 when framing or finish work is involved. Get the required hearth dimensions and clearances checked before buying materials.
Finally, model condition changes the effective cost of a used 8040. Cracked or missing soapstone panels, worn door gaskets, damaged firebricks, or a warped component may require parts or service. A lower purchase price is not necessarily a lower installed cost if repairs and transport are added.
How many installer hours does a typical 8040 job take?
A simple replacement on a prepared hearth with a usable chimney may take a two-person crew about 4-8 hours. A liner installation or minor hearth modification can extend the job to 1-2 days. New chimney construction, roof work, masonry repairs, or complicated access can require additional visits and specialized trades.
At common installed labor rates of $75-$150 per hour, two technicians working six hours represent $900-$1,800 in labor before materials and any separate travel or permit charges. Some companies instead quote a fixed installation price, so the hourly calculation is useful as a comparison rather than a substitute for the written quote.
Scheduling can affect the invoice if installation is urgent or requested during peak heating season. Ask whether the estimate includes delivery, setup, chimney inspection, startup, and cleanup. A lower labor figure may exclude one or more of those tasks.
How new, used, and comparable stoves compare in price
A new or unused Tribute 8040 can command a higher price when a dealer has limited remaining stock. Used units commonly fall around $800-$2,500 before transportation, inspection, repairs, or installation. A working stove with documented condition and included parts is generally easier to evaluate than a bare unit sold without its connector or manual.
Compare the total installed price with currently available compact wood stoves rather than relying only on an old advertised price for the 8040. A comparable new appliance may cost roughly $2,000-$4,500 before installation, depending on construction, heating capacity, and features. The best comparison uses the same scope: stove, flue connection, liner, hearth changes, delivery, and labor.
Repair can be economical when the existing stove is structurally sound and the needed work is limited to gaskets, firebricks, or other serviceable parts. If soapstone is cracked, key components are damaged, or the chimney needs extensive work regardless, compare a repair estimate against replacement. Evaluate the complete installed cost, not just the used stove’s asking price.
Why regional chimney work changes the final estimate
Wood-stove prices vary by dealer inventory and regional labor costs. In higher-cost metro areas and parts of the Northeast or West Coast, installation labor and chimney work may run about 10%-25% above a typical national estimate. Rural areas can have lower hourly rates, but longer travel distances, limited installer availability, or freight charges may offset the savings.
Climate and local housing stock can influence the scope more than the stove itself. Older homes with masonry chimneys may need liner upgrades, while homes without a usable chimney may require a complete listed chimney system. Quotes for a new insulated chimney can add roughly $2,000-$5,000 or more, depending on height, roof configuration, and routing.
Request at least two itemized local estimates that identify the liner length, pipe type, labor, disposal, and any assumed permit or inspection fees. A quote that looks unusually low may omit necessary chimney work, while a higher estimate may include materials or repairs the other contractor excluded.
Three installation scenarios for a Hearthstone 8040
Existing compliant chimney: A homeowner buys a used 8040 for $1,400, pays $400 for connector pipe and delivery, and $900 for installation and inspection. The estimated total is $2,700, assuming no repairs or liner replacement are needed.
Typical liner upgrade: A remaining-stock stove costs $3,200; a 20-foot insulated liner and fittings cost $1,500; labor is $1,200; and delivery and inspection add $300. The total is about $6,200, or roughly $310 per liner foot when the liner material and related work are considered together.
New chimney and hearth work: A $3,500 stove, $3,800 chimney system, $900 hearth work, and $1,600 installation labor create a project near $9,800. This exceeds the common range because it includes major infrastructure rather than a straightforward stove replacement.
These examples are planning estimates, not fixed prices. Local taxes, freight, code requirements, and the condition of existing construction can change the final invoice.
Which 8040 expenses can be reduced without cutting safety?
Keep the project close to the existing stove location when practical. Moving the appliance can mean new hearth work, longer connector pipe, and changes to chimney routing. Before selecting a contractor, arrange a site visit so the quote reflects actual clearances, chimney condition, and access rather than a rough phone estimate.
Compare itemized bids with the same assumptions, especially liner diameter and length, insulation, pipe components, removal, and inspection. Ask whether a sound existing chimney can be used after a professional assessment, but do not skip required lining or repairs to reduce the bill. Choosing a simpler compliant hearth finish may save money without changing the installation’s safety requirements.
If considering a used stove, inspect it before purchase and include transport and replacement parts in the budget. Buying a unit without checking its condition can erase the apparent savings. Off-season planning may offer more scheduling flexibility, although it does not guarantee a lower stove price or labor rate.
Confirm whether local permits or inspections apply before work begins. Requirements vary, and any required permit fee should appear in the estimate. Avoid unnecessary upgrades, but retain the components and professional work needed for a properly installed, code-compliant wood stove.