A new Hilti DD 250 core drill setup typically costs about $7,000-$12,000, depending on whether the quote includes a drill stand, water-management equipment, and accessories. The DD 250 price is shaped mainly by package contents, seller pricing, local availability, and whether the equipment is new, used, or refurbished.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| DD 250 drill motor | $5,000 | $6,500 | $8,000 | New motor, price may require a dealer quote |
| Motor and stand package | $7,000 | $9,500 | $12,000 | Stand and standard setup components included |
| Used complete setup | $3,000 | $5,000 | $7,500 | Condition, age, and included parts vary |
| Core bits | $100 | $250 | $700 | Per bit; diameter, length, and bit grade affect price |
Assumptions: U.S. prices in USD, before sales tax; new equipment estimates reflect typical dealer or equipment-market pricing and can change by package and availability.
What a new DD 250 setup usually costs
A buyer budgeting for a new Hilti DD 250 should allow roughly $7,000-$12,000 for a working rig with motor and compatible stand. A motor sold by itself may be around $5,000-$8,000; the actual package can vary because sellers bundle components differently and Hilti pricing may be quote-based.
The stand and included accessories can shift the total by several thousand dollars. A basic package may suit routine concrete coring, while larger jobs may need additional bits, water collection, or vacuum equipment. Used listings around $3,000-$7,500 can be less expensive, but inspection and parts availability matter.
How the motor, stand, and accessories shape the quote
Request an itemized quote so the drill motor is not confused with a complete coring system. Stand compatibility, anchoring hardware, water controls, and the number and size of core bits can make two similarly described packages differ substantially.
| Quote component | Typical price | Pricing basis | What changes the amount |
|---|---|---|---|
| DD 250 motor | $5,000-$8,000 | Per motor | New versus used; seller package |
| Drill stand | $1,500-$3,000 | Per stand | Model, condition, and included base |
| Diamond core bits | $100-$700 | Per bit | Diameter, length, and bit construction |
| Water collection and delivery items | $200-$1,000 | Per setup | Included accessories and water-control needs |
| Freight, tax, or setup | $100-$900 | Per order | Shipping distance, tax rate, and seller fees |
Confirm the stand, base, and bit inclusions before comparing totals. Some quotes list the motor alone, while others bundle a stand or select accessories. The listed amounts are planning ranges, not fixed Hilti prices.
Which DD 250 specs and coring conditions raise the price?
Bit diameter and drilling depth affect the accessory budget. Smaller common holes may use bits near 1-3 inches, while larger openings—such as 6-10 inches or more—require larger, costlier bits and can call for additional setup time. Confirm the drill and stand configuration supports the intended application.
Job volume also changes the practical cost. A contractor drilling dozens of holes may need multiple bits or backup equipment; a one-off project may be better served by renting. Slab thickness, reinforcement, overhead drilling, and limited access can increase labor or require additional water control, even when the machine price stays the same.
Large diameters and difficult access can cost more than the motor itself suggests. Ask the seller or rental provider to verify capacity and recommended accessories for the specific hole size and material.
What do three DD 250 buying scenarios look like?
A motor-only purchase for a buyer who already owns a compatible stand may total about $5,000-$8,000 before tax. A new motor-and-stand rig with a few bits and basic water accessories may land around $8,000-$12,000, depending on the selected components.
A used package with a stand and limited accessories may list for approximately $3,000-$7,500. A buyer should account for worn bits, missing parts, repairs, and freight rather than treating the asking price as the complete cost.
Package contents explain much of the difference between these scenarios. Request model numbers and a written inventory, and compare equivalent configurations rather than headline prices.
How delivery, setup, and labor affect project spending
Buying the drill does not include the crew cost to complete core drilling. Concrete coring contractors commonly charge about $75-$150 per labor hour per worker, with minimum call-out fees often around $250-$600. Rates vary with location, hole size, reinforcement, access, and whether water containment is required.
For a simple job, a crew may spend 2-4 hours on setup and drilling; larger or overhead work can take longer. A basic labor estimate uses Labor estimate: 2-4 hours at $75-$150 per hour is about $150-$600 per worker, before travel, minimum charges, and disposal.
For occasional use, compare the total rental or contractor quote with ownership. Rental rates for a heavy-duty core drill setup vary, but budgeting $200-$500 per day plus bits and deposits is a reasonable starting point to verify locally.
How U.S. location and freight change the DD 250 price
Dealer availability and freight can make the same package more expensive in remote areas than in major metro markets. As a planning allowance, remote delivery or limited local competition may add 5%-15% compared with a readily available metro quote. This is not a universal regional price rule; seller promotions and inventory can outweigh location.
Sales tax varies by state and locality and may add several hundred dollars to a large equipment purchase. Confirm whether freight, handling, and tax are included in the final written quote, especially when comparing online and local dealer prices.
Compare delivered, tax-inclusive totals rather than equipment prices alone. A lower listing can lose its advantage once freight or missing package items are added.
Which DD 250 costs can buyers control?
Buy only the stand and accessories needed for the planned hole sizes and work conditions. If compatible equipment is already on hand, verify model compatibility and avoid paying twice for a stand or water-control items. For infrequent projects, compare a one-day rental or contractor service against the purchase price and upkeep.
For used equipment, inspect the motor, controls, stand carriage, base, and included cables or fittings; request a demonstration when practical. Price replacement bits separately, since worn or unsuitable bits can create an immediate expense. Get at least two itemized quotes with matching model numbers and package contents.
Matching the package to actual use is the clearest way to avoid overspending. Avoid adding accessories based only on a broad package description, and verify warranty coverage and return terms before paying.