The Hilti DSH 900-X price is typically about $2,000-$2,800 for a new 16-inch gas cut-off saw, depending on seller, package, and included blade. Buyers should budget extra for diamond blades, fuel, delivery, and any service or maintenance needs; local availability and sales tax also affect the final amount.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New saw | $2,000 | $2,400 | $2,800 | Tool price; package contents vary |
| Diamond blade | $150 | $300 | $500 | Blade type and diameter affect price |
| Ready-to-work purchase | $2,200 | $2,750 | $3,400 | Saw, blade, and basic supplies |
| Used saw | $800 | $1,400 | $2,000 | Condition and service history matter |
What a new 16-inch DSH 900-X usually costs
For a new Hilti DSH 900-X, a practical planning range is $2,000-$2,800 before tax. A typical purchase lands near $2,400 when the saw is sold with standard equipment and no premium blade bundle. Dealer quotes can differ based on stock, promotions, warranty terms, and whether accessories are included.
The saw is designed for demanding concrete and masonry cutting, and its 16-inch blade capacity is a key part of the price comparison. Buyers should confirm that a listing is for the DSH 900-X itself, rather than a different DSH model or a package with different accessories. Use $2,400 as a working tool-only budget, then verify the exact contents of the quote.
Assumptions: U.S. retail pricing, standard new saw, ordinary availability, and no sales tax.
How the blade and accessories change the purchase total
A quote can look inexpensive until the required cutting supplies are added. The table below gives planning ranges for common purchase components; exact blade prices vary by application and seller.
| Purchase component | Low | Typical | High | Price basis |
|---|---|---|---|---|
| DSH 900-X saw | $2,000 | $2,400 | $2,800 | Per saw |
| Concrete diamond blade | $150 | $300 | $500 | Per 16-inch blade |
| Basic safety and operating supplies | $50 | $125 | $250 | Per purchase |
| Delivery or freight | $0 | $40 | $150 | Per order |
| Sales tax | $0 | $150 | $300 | Depends on location and subtotal |
Some sellers include a blade or accessory kit, while others list the saw alone. Check whether the blade is appropriate for the material: a blade selected for concrete may not be the right choice for asphalt, masonry, or reinforced concrete. Compare the out-the-door package price, not just the saw’s advertised price.
Blade type and cutting depth can shift the quote
The 16-inch blade size is a useful starting point, but blade construction and intended material change the add-on cost. General-purpose or entry-level diamond blades may fall around $150-$250, while higher-grade blades for frequent use or tougher reinforced material can reach $350-$500 or more.
Job dimensions also affect the overall budget. A short series of shallow cuts may need only one blade and basic supplies; repeated deep cuts can accelerate blade wear and increase fuel and maintenance expenses. The DSH 900-X’s maximum blade diameter does not mean every job reaches the same cutting depth, since blade guard geometry and cutting method limit usable depth. Specify material, cut depth, and expected linear footage when comparing blade packages.
Is a bare saw cheaper than a blade-ready package?
A bare saw at $2,000-$2,300 can be the lower-cost choice if suitable blades and supplies are already on hand. A blade-ready package near $2,400-$2,800 may be better value when its included blade would otherwise cost $150-$500. Package value depends on the blade grade, not simply the number of items in the box.
For occasional use, buying one appropriate blade may keep the initial outlay lower than purchasing a multi-blade kit. Contractors who cut different materials should price the required blades individually and compare them with the package contents. Choose the bundle only when its included accessories match the actual cutting work.
Dealer labor and delivery are usually separate charges
This is a purchase of a portable gas saw, not a fixed installation, so professional installation labor is generally not part of the price. If a dealer charges for setup, inspection, or operator instruction, ask whether it is optional and what the service includes. A shop labor rate of roughly $75-$150 per hour can apply to service work, but the purchase itself normally requires no installation.
Freight or local delivery may add $0-$150, especially when ordering from outside the area. A buyer collecting the saw from a local dealer can often avoid delivery fees, while an urgent or special-order purchase may involve additional shipping costs. Ask for a written quote separating tool price, service, freight, and tax.
Used DSH 900-X prices depend on hours and service records
Used examples may be listed for roughly $800-$2,000. Lower-priced units can have substantial wear, missing parts, or uncertain maintenance; cleaner saws with documented service and included accessories tend to be closer to $1,500-$2,000. These are budgeting ranges, not a guarantee of condition or resale value.
Before buying used, inspect the starter, guards, controls, air filter, fuel system, and general engine condition. Confirm that the saw starts and runs, and check whether a blade is included and usable. A repair bill can erase the apparent savings, so compare the used price plus expected repairs with the dealer price for a new unit. Request service history and test the saw before treating a low listing as a bargain.
Where buyers can trim the DSH 900-X budget
Compare at least two dealer quotes with the same saw configuration and blade specification. Ask whether a current promotion changes the price, whether freight is avoidable through local pickup, and whether the package includes accessories already owned. For tax planning, use the buyer’s actual local sales-tax rate rather than assuming a national rate.
Control the blade budget by matching blade grade to the job and replacing blades based on condition, not an arbitrary schedule. Avoid paying for a bundle of blades that will sit unused, but do not select an unsuitable blade simply because it has the lowest price. For a used purchase, reserve money for inspection and likely wear items. The most reliable savings come from comparing like-for-like quotes and removing items the job does not need.