A Hilti screw gun typically costs $250-$900, depending on whether it is corded or cordless, sold as a bare tool or kit, and paired with a collated-screw attachment. The main price drivers are battery and charger inclusion, model, accessory package, and whether the tool is new, used, or refurbished.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Corded screw gun | $250 | $350 | $500 | Tool only; price varies by model and seller |
| Cordless bare tool | $300 | $450 | $650 | Battery and charger usually separate |
| Cordless kit | $500 | $700 | $900 | May include batteries, charger, and case |
| Collated screw attachment | $150 | $250 | $350 | Attachment only; screw gun sold separately |
| Used screw gun | $100 | $250 | $450 | Condition, battery health, and included items matter |
What a Hilti screw gun costs for drywall work
For standard drywall installation, a new Hilti screw gun commonly lands around $300-$650 for the tool alone. Corded models tend to sit toward the lower end, while cordless tools cost more because they offer portability and use Hilti’s battery platform. A complete cordless kit commonly runs $500-$900, depending on battery count, capacity, charger, and case.
Models such as the SD 5000-A22 are cordless drywall screwdrivers; corded options are also sold for continuous use near an outlet. Exact model availability and package contents vary. A bare tool is not a complete cordless setup if the buyer does not already own a compatible battery and charger.
Budget about $450 for a bare cordless driver or $700 for a typical kit, before tax and any collated attachment. These are practical retail estimates, not fixed list prices; promotions, seller inventory, and regional availability can shift quotes.
Assumptions: New tool, ordinary U.S. retail availability, standard drywall installation, and no bulk contractor discount.
How the Hilti tool, batteries, and screw attachment shape the quote
A screw gun quote can bundle several distinct items. Comparing only the package total may obscure whether the listing includes batteries, a charger, a depth gauge, or an attachment. The following ranges are typical budgeting estimates; packages differ by model and seller.
| Quote component | Typical price | What changes the charge | Buying note |
|---|---|---|---|
| Screw gun body | $250-$650 | Corded versus cordless, model, and condition | Bare-tool listings exclude power accessories |
| Battery | $100-$220 each | Voltage, amp-hour capacity, and new versus used | Check compatibility with the specific tool |
| Charger | $60-$150 | Charging speed and included package | Some kits include a charger; others do not |
| Collated screw attachment | $150-$350 | Model compatibility and attachment condition | Confirm it fits the driver before purchase |
| Bits and depth accessories | $10-$60 | Bit type, quantity, and replacement parts | Wear items may need replacement |
| Sales tax and delivery | $0-$100+ | Local tax rate, shipping, and order size | Compare delivered totals, not sticker prices |
The attachment can be a meaningful expense, but it is not required for every job. A standard screw gun drives individual screws; a collated attachment feeds compatible strip screws and can speed up repeated fastening. For a complete cordless setup, compare the tool, battery, charger, and attachment as separate line items against the bundled price.
Which drive setup costs less for the job
A corded driver can be the lower-cost choice when work stays in one area and an outlet is accessible. A cordless bare tool costs more upfront, but may avoid extension-cord management and can be more practical on ceilings, remote rooms, or active construction sites. A kit costs more initially but may be cheaper than buying the battery and charger separately.
A collated attachment raises the upfront cost but can make sense on large drywall jobs with repeated screw placement. It is less useful for small repairs, mixed fastening tasks, or work requiring frequent changes in screw type. Price the attachment and compatible screws separately; not every strip or screw length works with every feed mechanism.
| Setup | Typical upfront range | Best price logic |
|---|---|---|
| Corded driver, individual screws | $250-$500 | Lower purchase price for stationary work |
| Cordless bare tool with existing battery | $300-$650 | Useful when compatible batteries are already owned |
| Cordless kit with battery and charger | $500-$900 | One purchase for buyers new to the battery platform |
| Driver plus collated attachment | $450-$1,000 | Higher initial cost for repeated high-volume fastening |
How model, battery capacity, and screw volume change price
Three specifications have an outsized effect on the final total: power source, battery package, and fastening volume. A corded model usually avoids battery costs, while a cordless kit with two batteries can add $100-$300 or more over a bare-tool price. Higher-capacity batteries generally cost more but can reduce interruptions between charges.
Job size also affects whether an attachment is worth buying. A one-room patch may require only a driver and a bit. On a project involving hundreds or thousands of screws, a collated feed system may improve pace enough to justify its added purchase price. The right threshold depends on crew speed, screw spacing, and how often the attachment will be used on future jobs.
Compatibility is a cost issue, not just a convenience issue. Check the driver model, battery platform, attachment fit, and screw strip specifications before ordering. A mismatched attachment or battery can turn an apparently low online price into a return, restocking, or replacement expense.
For price comparisons, record the exact model and package contents, then compare the same configuration across sellers. A bare-tool price should not be compared directly with a kit price or a bundle that includes a collated attachment.
Ways to reduce the Hilti screw gun purchase price
First, avoid buying a kit if compatible Hilti batteries and a charger are already available. Verify the exact battery platform and condition rather than assuming that any Hilti battery will fit. Conversely, if no compatible power accessories are on hand, compare the complete kit against the separate cost of a bare tool, batteries, and charger.
Choose corded equipment when the work area is fixed and cord access is safe and practical. For occasional repairs, a standard driver may be more economical than adding a collated attachment. For repeated production work, estimate how much time the attachment could save before deciding whether its $150-$350 purchase price is justified.
Used and refurbished listings can lower the purchase price, but inspect the tool’s chuck, clutch, depth adjustment, housing, and included accessories. For a cordless tool, ask about battery age and runtime; a worn battery may need replacement and erase much of the savings. Confirm return terms and whether the seller provides any warranty.
Keep the purchase scope to the equipment the job actually needs, and compare delivered prices for matching configurations. A low bare-tool listing is not a bargain if it requires costly missing batteries, a charger, or a compatible attachment.
What labor time and screw volume mean for attachment value
Hilti screw guns are typically purchased as tools, not as an installed service, so labor is usually separate from the equipment price. For budgeting a contractor’s work, crew rates often fall around $50-$100 per hour per worker, with local markets and project conditions affecting quotes. A labor estimate can be framed as .
A collated attachment does not reduce the tool’s purchase price, but it may reduce time spent handling individual screws on repetitive work. The savings are strongest when crews install a high volume of similar fasteners and can keep the attachment loaded. For a small room or repair, setup and adjustment may offset much of that time advantage.
Ask contractors to separate equipment or material charges from labor when reviewing a drywall quote. A screw gun purchase is generally not billed as a full new-tool charge to every customer; contractors may include equipment expense in their business overhead or apply a modest equipment fee. For a specific project, compare labor scope and fastening volume rather than assuming that a more expensive tool automatically lowers the bid.
Used Hilti screw guns and battery replacement trade-offs
Used tools commonly list around $100-$450, with lower prices more likely for older, worn, or bare models and higher prices for clean tools with accessories. Refurbished units may cost more than private-sale tools but can come with a limited seller warranty. Check whether the asking price includes a battery, charger, case, and depth accessories.
Battery condition is particularly important for cordless models. A replacement battery can add roughly $100-$220, depending on capacity and seller. If the battery is weak, the tool has damaged terminals, or the charger is missing, calculate those items into the total before comparing the used price with a new bare tool.
Inspect the depth setting and clutch operation, since inconsistent screw depth can slow installation or damage drywall paper. Check for cracked housing, excessive wear around the bit holder, and signs of heavy jobsite use. A brief test under load is more informative than a photo of a clean exterior.
Buy used only when the tool’s condition and included accessories are clear enough to estimate the complete working cost. A $150 used driver with a failing battery may cost more to put into service than a discounted new bare tool.
Three realistic Hilti screw gun buying budgets
A small repair budget looks different from a full production setup. These examples show approximate equipment totals before sales tax; actual pricing depends on model, seller, package, and condition.
| Purchase scenario | Included equipment | Estimated total |
|---|---|---|
| Occasional room repair | Used corded driver at $180, replacement bit set at $25 | $205 |
| New cordless basic setup | Bare tool at $450, one battery at $150, charger at $90 | $690 |
| High-volume drywall setup | Cordless kit at $700, compatible collated attachment at $250 | $950 |
In the first scenario, the buyer accepts used-tool risk and avoids battery costs. In the second, the separate components create a usable cordless package, though a kit could be less expensive if it bundles the same items. In the third, the attachment is included for repetitive fastening; screws themselves remain an ongoing material expense.
Use the delivered, ready-to-work total as the comparison figure. Include tax, shipping, batteries, charger, and attachment only when they are needed for the intended job.