Rough pricing for Home Depot quartz countertops typically reflects slab price, edge profiles, fabrication, and install labor. This article presents actual cost ranges in USD, with per-square-foot and per-project examples to help budget and compare quotes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Quartz slab price (per sq ft) | $40 | $55 | $100 | Includes standard slabs from common brands sold by Home Depot |
| Edge fabrication (per linear ft) | $10 | $15 | $40 | Bevel, eased, or square |
| Fabrication and installation (per sq ft) | $25 | $40 | $60 | Cutouts, sink, and backsplash considerations |
| Delivery/haul-away (per job) | $40 | $75 | $150 | Depends on distance and staging |
| Total installed price (per sq ft) | $105 | $135 | $250 | Labor, material, and install mix |
Typical Quartz Countertop Cost by Size and Material Mix
Home Depot quartz countertops fall into noticeable ranges based on size and brand. Expect about $40-$55 per sq ft for midrange slabs and up to $100 per sq ft for premium options with complex patterns. Labor, edging, and cutouts add roughly $15-$25 per sq ft on average. A standard 30 by 96 inch island with a 1.5 cm thickness usually lands around $1,800-$2,600 installed in most markets.
Material and Brand Variations That Drive Price
Quartz brands sold at Home Depot vary in price due to resin content, stain resistance, and surface hardness. Midrange brands typically cost $40-$60 per sq ft, while premium lines can reach $90-$100 per sq ft. A typical 3 cm thickness project with a basic edge profile may total $2,000-$3,200 for a 25- to 40-square-foot countertop run.
Edge Style and Cutouts: What Elevates the Price
Edge profiles and practical features add observable costs. Simple square or eased edges stay near the base rate, while full bullnose or ogee edges add $8-$25 per linear foot. Large sink cutouts and multiple backsplash returns can push installed prices upward by $200-$600 depending on complexity.
Labor and Fabrication Time: Regional Differences That Matter
Labor hours and crew size differ by market density. In many U.S. cities, a standard install requires 1-2 skilled installers over 4-8 hours. Regions with higher living costs may see per-square-foot rates elevated by 10-20%, while rural areas could be toward the lower end of the spectrum. For a 40 sq ft run, expect roughly $1,600-$2,400 in labor-inclusive pricing depending on edge and sink type.
Delivery, Handling, and Waste: Hidden But Real Costs
Delivery and haul-away are commonly itemized as separate charges. Typical delivery ranges from $40 to $150 per job, with disposal fees often bundled or charged per trip. If the project requires staged deliveries or difficult access, expect the upper end of the range to apply.
Regional Price Variations Across the United States
Prices shift with local labor markets and material sourcing. In the Southeast and Midwest, total installed costs for a standard run often sit around $110-$160 per sq ft, while coastal metropolitan areas can push to $140-$200 per sq ft when high-demand labor and logistics apply. A kitchen remodel using 40 sq ft of countertop might land between $4,400-$6,400 in affordable regions and $5,600-$8,000 in dense markets.
Smart Budget Tactics: How to Reduce the Installed Price
Cost-conscious shoppers can control price by narrowing scope. Choose a standard edge to avoid premium charges, limit island size, and batch-cutouts to essential ones. When possible, select a reputable but not premium-brand quartz and schedule installation in off-peak months. A practical approach is to compare quotes for the same slab, edge, and sink configuration across two contractors to identify best value, not just lowest price.
What a Typical Home Depot Quartz Countertop Quote Includes
Quotes usually itemize material, fabrication, and installation. Material costs cover slabs and epoxy adhesive, while fabrication includes cutting, edge finishing, and polishing. Installation adds mounting, seam work, and sealing. A clear quote should show per sq ft rates for materials (slab price), edge per linear foot, and labor hours with a labor-rate summary.
Real-World Quote Example: A Standard Kitchen Run
Consider a 30 sq ft run with a 3 cm slab and a simple eased edge. Material cost around $1,200-$1,800, fabrication and install about $900-$1,500, delivery about $50-$100, total installed range $2,150-$3,400. Assumptions: Midwest labor rates, standard edge, single sink cutout, 2 technicians, normal access.
Two Common Upgrade Scenarios and Their Price Impact
Upgrade 1: Add a full-height backsplash and a large island surface. Total increment typically $600-$1,200 above baseline per project, depending on edges and seam layout. Upgrade 2: Install an undermount sink with complex corner radii. Extra cost often $300-$800 for materials and labor on top of standard install.
Per-Unit and Per-Project Guidance for Budget Planning
For budgeting, use the installed price per square foot as the anchor. Average installed price ranges from $135-$180 per sq ft in many markets, with flex up to $200-$250 per sq ft in high-cost areas or premium brand selections. A typical 10-foot-long run can be priced at $1,350-$1,800 for material plus another $600-$1,000 for fabrication and installation.