Homeowners typically see a total cost of $600 to $3,000 for a kitchen hood replacement, depending on hood type, ductwork, and installation complexity. The main cost drivers are hood type, size (width), venting needs, and labor. The following sections break down typical pricing ranges and factors to help set a realistic budget for a replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Hood price (unit) | $150 | $500 | $2,000 | Under-cabinet or wall-mount hoods vary widely by style |
| Installation labor | $200 | $600 | $1,400 | Includes mounting, wiring, and vent connection |
| Vent ductwork | $50 | $300 | $1,000 | Depends on length and material |
| Electrical work | $100 | $300 | $800 | Outlet, wiring, or breaker adjustments |
| Permits/inspections | $0 | $100 | $300 | Not always required; varies by municipality |
| Disposal | $0 | $50 | $150 | Old hood removal and trash handling |
Overview Of Costs
Estimated project ranges assume a standard residential kitchen, with a common 30–36 inch hood and basic installation. A typical replacement runs from about $600 to $3,000 total, with most homeowners spending $900–$2,200. Per-unit costs align with hood price: $150–$2,000, plus labor and ventilation adders. Assumptions: region, hood style, and existing venting.
Cost Breakdown
Table shows typical components and price bands. A price-conscious install may minimize venting, while a high-end project might involve custom ductwork and a premium concealed hood. The largest variable is ducting length and material, which can push costs up by hundreds to over a thousand dollars.
| Components | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $150 | $500 | $2,000 | Basic stainless or tempered glass options |
| Labor | $200 | $600 | $1,400 | Installation, venting, electrical work |
| Equipment | $0 | $100 | $400 | New mounting hardware or brackets |
| Permits | $0 | $100 | $300 | Local rules dependent |
| Delivery/Disposal | $0 | $50 | $150 | Removal of old unit |
| Warranty & Other | $0 | $50 | $200 | Labor or parts warranty extensions |
What Drives Price
Key price levers include hood width (24″, 30″, 36″), type (ducted vs. ductless, under-cabinet vs. wall mount), CFM rating, and build material. A 36-inch ducted hood with 600–900 CFM and stainless finish typically costs more than a 24-inch ductless model. If existing ductwork is short and straight, installation is simpler and cheaper. Complex runs or high ceilings raise labor time and materials.
Labor hours often hinge on ceiling height, cabinet clearance, and electrical configuration. data-formula=”labor_hours × hourly_rate”> For example, longer runs or custom adapters may add 2–6 hours of labor, depending on the setup.
Regional Price Differences
Prices vary across regions due to labor rates and material availability. In the Northeast, expect higher labor costs and potential permit fees; the Midwest typically shows moderate pricing; the West Coast may have premium pricing on premium brands. Regional deltas can be ±10–25% from national averages depending on urban vs. rural settings. This means a project at $1,200 in one region could approach $1,500–$1,800 elsewhere with similar specs.
Labor & Installation Time
Typical installation timeline spans 1–4 hours for simple ductless or short runs, while complex ducted installs with long runs or ceiling work can take 6–10 hours. A licensed electrician is often required for wiring adjustments, adding roughly 1–3 hours. Labor rates commonly range from $60–$120 per hour, with travel and setup charges in some markets.
Additional & Hidden Costs
Be aware of add-on fees that can appear on the bill. If old ducting or cabinet trim must be removed, disposal charges apply. If the vent path requires a roof or exterior wall vent cap, weatherproof flashing and piping add costs. Hidden costs may include electrical panel adjustments, new outlet installations, or permits. A typical hidden-cost range is $50–$400, depending on local requirements and existing infrastructure.
Real-World Pricing Examples
Three scenario cards illustrate common outcomes.
-
Basic: 24″ ductless hood, simple install, no ducting, basic finish. Labor 2 hours; hood $150; total around $350–$700.
Assumptions: single-story, no venting extension. -
Mid-Range: 30″ ducted hood, short run with standard duct, electrician for outlet. Hood $500; labor 4–6 hours; duct $200; total around $900–$1,600.
Assumptions: standard ceiling height, typical kitchen layout. -
Premium: 36″ high-end stainless hood, long duct run, roof vent cap, permit, and disposal. Hood $1,200; labor 8–10 hours; duct $350; permit $150; total around $2,000–$3,200.
Assumptions: urban area, complex vent path, code compliance.
Cost Compared To Alternatives
Ventless models can reduce ductwork but may limit performance and resale appeal; they typically cost $300–$1,100 for the unit, with installation around the same as ducted options but without venting work. If upgrading the range top or reconfiguring cabinets is planned, consolidating tasks may save on labor. Compare total costs, not only unit price, to determine value.
Vehicle & Maintenance Costs
Ownership costs extend beyond initial installation. Filters require replacement every 6–12 months; some motors warrant 5–10 years. Annual maintenance, such as filter cleaning and motor lubrication where applicable, can add $20–$60 per year. A well-maintained hood maintains efficiency and reduces energy use over time.
Assumptions: region, specs, labor hours.