Horizon Structures dog kennel prices depend on building size, kennel layout, materials, site access, and whether delivery and installation are included. As a planning estimate, buyers may budget about $8,000-$30,000 for a small-to-mid-size kennel building, with larger or more customized projects reaching $40,000 or more; the company’s current price for a specific design requires a direct quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Small kennel building | $8,000 | $13,000 | $19,000 | Basic shell or simple layout, roughly 8-by-12 to 10-by-16 ft |
| Mid-size kennel building | $15,000 | $23,000 | $32,000 | More stalls, upgraded finish, roughly 12-by-20 to 12-by-24 ft |
| Large or customized building | $28,000 | $42,000 | $65,000+ | More area, interior partitions, utility work, or difficult site conditions |
| Installed cost per building sq ft | $65 | $110 | $180+ | Planning range; does not guarantee a Horizon Structures quote |
What a Horizon kennel building may cost by size
Horizon Structures sells custom-built structures, so the final kennel price depends on the chosen plan and specifications rather than a single universal rate. The ranges below are budgeting estimates for a building project, not a published company price list. A quote may separate the structure from options, delivery, site preparation, and utilities.
A compact 8-by-12-ft building, or 96 sq ft, could land around $8,000-$19,000 for a relatively straightforward setup. A 10-by-16-ft building may run about $12,000-$24,000. A 12-by-24-ft building, with 288 sq ft for additional stalls or storage, may cost $22,000-$40,000 or more depending on interior fit-out and foundation needs.
For early budgeting, allow roughly $65-$180+ per sq ft installed, with small buildings often costing more per square foot than larger ones. The low end assumes a simple design and ordinary access; the high end allows for upgraded finishes, more interior work, and regional labor variation. Confirm whether a quote includes tax, delivery, anchoring, and installation before comparing it with another price.
Assumptions: U.S. planning ranges for a small-to-mid-size wood kennel building, standard access, and no major grading or utility extension.
How framing, kennel interiors, and site work shape the quote
A kennel building quote can combine the structure, interior components, transport, and work at the property. Requesting an itemized estimate helps distinguish the building price from improvements that may be handled by a separate contractor. The following allocation is illustrative for a mid-range project, not a fixed Horizon Structures breakdown.
| Cost component | Typical range | Example share on $23,000 | What can change it |
|---|---|---|---|
| Building materials and shell | $9,000-$17,000 | $12,000-$14,000 | Size, siding, roof, doors, insulation |
| Interior kennel fittings | $1,500-$7,000 | $2,000-$4,000 | Partitions, gates, washable surfaces |
| Labor and assembly | $2,000-$7,000 | $3,000-$4,000 | Assembly scope and crew access |
| Delivery and placement | $500-$3,500 | $800-$1,500 | Distance, access, unloading equipment |
| Foundation and site preparation | $1,000-$8,000 | $1,500-$3,000 | Grading, drainage, base type |
| Permits and utility work | $0-$6,000+ | $0-$2,000 | Local rules, electrical or plumbing scope |
Some buildings arrive largely assembled, while others require substantial on-site work; the quote should state which applies. Interior kennel panels, dog doors, floor drains, and plumbing can be optional or separately priced. Concrete pads and utility connections may be excluded even when installation is included.
The biggest quote-comparison mistake is treating a building-only price as equivalent to a complete, usable kennel. Ask each supplier to identify the same scope: building dimensions, number of runs, interior finish, foundation, delivery distance, assembly, and utility connections.
Why 10-by-16 dimensions and kennel specifications matter
Floor area is only one price driver. A 10-by-16-ft footprint has 160 sq ft, but its cost changes with the number of separate dog spaces, storage needs, and the type of partitions and doors. A basic shell is less expensive than a finished kennel with washable interiors, multiple gates, and dedicated equipment areas.
For a smaller layout with two or three dog spaces, a buyer might plan $12,000-$24,000 for the building and basic fit-out. Increasing the footprint to 12-by-24 ft can add several thousand dollars in framing, roofing, flooring, and interior materials. Adding a substantial run or separate wash area may push the total beyond $35,000, especially when plumbing and drainage are included.
Wall and roof choices also affect the estimate. Insulation, upgraded siding, heavier doors, and more durable flooring can raise material costs, but may suit year-round use better than a basic seasonal shell. Confirm the exact floor material and whether it is designed for frequent cleaning; a standard shed floor should not automatically be assumed to meet kennel needs.
Each additional 100 sq ft may add about $6,500-$18,000 to a completed-project budget, depending on finishes and included work. This is a broad planning calculation, not a manufacturer’s per-foot rate. Ask for pricing on the same footprint with and without upgrades to see which options account for the difference.
Assumptions: Typical U.S. construction pricing; foundation, utilities, and local permits can move the total outside these ranges.
How much delivery, setup, and crew labor can add
Delivery and installation are sensitive to distance, site access, and whether the building is shipped in sections or assembled at the property. A nearby, accessible site might incur $500-$1,500 in delivery and placement charges. A longer route, narrow driveway, or need for special equipment can raise that to $2,000-$3,500 or more.
On-site assembly for a modest structure may take a small crew one to three days, while a larger or more customized project can require several days or additional trades. If labor is billed separately, a general planning range is $50-$100 per worker-hour, with specialized electrical or plumbing work often priced at different rates.
Ask whether the quoted installation includes anchoring, leveling, assembly, and cleanup. A low delivery number may cover transport only, leaving unloading or assembly as separate charges. Confirm truck access and turning room before signing; an inaccessible placement area can require extra handling or a revised delivery method.
Labor and delivery together may add roughly $2,500-$9,000 to a modest project, with difficult access pushing the bill higher. Get the crew size, expected workdays, and included tasks in writing rather than relying on a broad “installed” description.
Regional price differences for kennel buildings across the U.S.
Local labor, freight distance, building codes, and weather requirements affect the quote. As a general budgeting adjustment, buyers in high-cost metro areas or remote locations may see prices 10%-25% above a comparable project in a lower-cost region. Rural areas can have lower labor rates but higher delivery or equipment charges when a supplier is far away.
In colder climates, insulation, snow-load specifications, and weather-tight doors can add roughly $1,000-$5,000, depending on building size and chosen materials. In hot, humid regions, ventilation, shading, and moisture-resistant finishes may add $500-$3,000. These are potential option costs rather than mandatory upgrades; local code and intended use determine what is needed.
Freight is often quote-specific. A building delivered a short distance from the manufacturing or staging location may cost less to transport than one shipped several states away. Ask whether delivery is calculated by distance, a fixed zone, or the equipment required to unload the structure.
Use regional adjustments as a comparison aid, not as a substitute for a local written quote. Two projects with the same dimensions can differ because of freight, foundation conditions, local permitting, and seasonal weather specifications.
Three sample budgets for different kennel building scopes
These examples show how size and included work can change an all-in planning total. They are not official Horizon Structures offers; actual designs, options, and delivery terms must be confirmed with the company. Figures assume ordinary access and exclude unusual grading or long utility runs.
| Scenario | Scope | Building and interior | Delivery and labor | Estimated total |
|---|---|---|---|---|
| Compact home kennel | 8-by-12 ft, simple shell, two spaces | $8,000-$13,000 | $1,500-$4,000 | $9,500-$17,000 |
| Mid-size multi-dog setup | 10-by-16 ft, three spaces, durable interior | $14,000-$22,000 | $3,000-$6,000 | $17,000-$28,000 |
| Expanded kennel building | 12-by-24 ft, multiple runs, upgraded finish | $25,000-$38,000 | $5,000-$10,000 | $30,000-$48,000 |
The compact example assumes no plumbing and minimal site work. The mid-size example allows for additional partitions and upgraded surfaces but not major utility extensions. The expanded example includes more substantial interior work and a larger delivery or installation allowance.
A complete project budget should include a separate allowance for site preparation and any utilities not shown in the supplier’s quote. Depending on grading and connections, those items may add $1,000-$8,000 or more. A concrete foundation or long electrical run can exceed the allowance.
Which kennel upgrades raise the total beyond the building price
Interior partitions, kennel gates, dog doors, washable wall coverings, and upgraded flooring can increase the price by hundreds to several thousand dollars. Plumbing fixtures, floor drains, and hot-water access can add several thousand more because they may require both building modifications and work by licensed trades. Ask which upgrades are available from the builder and which must be installed locally.
Site preparation is another common extra. Basic leveling and a compacted gravel base may cost $500-$2,500, while more extensive grading or drainage work can run $2,000-$8,000 or more. A concrete slab often costs about $8-$15 per sq ft, depending on thickness, reinforcement, access, and local rates. A 160-sq-ft slab at that range would be approximately $1,280-$2,400 before unusual excavation or drainage work.
Permits vary by municipality and may depend on building size, foundation, electrical service, plumbing, or the property’s zoning. Fees might be minimal or several hundred dollars, but required inspections or code changes can add expense. The local building department can confirm requirements before an order is placed.
Request a written list of exclusions so added work does not appear unexpectedly after delivery. Common exclusions include a foundation, electrical panel, trenching, drainage, permits, landscaping repair, and hookup fees.
How to lower a Horizon Structures kennel quote without cutting essentials
Start by defining the needed number of dog spaces, storage area, and intended year-round use. A smaller footprint can reduce framing and roofing costs, but leaving too little room for safe cleaning or movement may create problems later. Compare a compact plan with a slightly larger one and ask how much each extra 50 or 100 sq ft changes the total.
Prioritize durable, cleanable surfaces where animals will contact them, while postponing nonessential finish upgrades. If electrical or plumbing connections are not needed immediately, ask whether the building can be designed to accept future installation without paying for equipment that will sit unused. Any deferred work should still comply with code and the builder’s specifications.
Prepare the site before delivery when the supplier allows it. Clearing brush, confirming truck access, and arranging a stable base in advance can reduce crew delays and equipment charges. Do not undertake grading or foundation work without confirming the required dimensions, elevation, and support requirements in writing.
Compare at least three itemized quotes for the same footprint, finish level, delivery scope, and installation tasks. Check whether prices include tax, permits, disposal, and warranty coverage. A lower initial figure may not be less expensive once missing site work or interior fittings are added.
Ask whether a standard plan can meet the requirements before requesting extensive customization. Custom doors, partitions, and layouts may be worthwhile for a specific operation, but each change can add design and construction expense. Keeping the footprint and options list stable makes supplier bids easier to compare and helps identify the real cost of necessary upgrades.