A new Hot Spring Jetsetter LX typically costs about $13,000-$18,000 before sales tax, with delivery and electrical work potentially adding $800-$2,500. The final quote depends on the dealer, included cover and steps, site access, electrical distance, and whether the tub is new, floor-model, or used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Jetsetter LX | $13,000 | $15,500 | $18,000 | Typical tub price before tax and site work |
| Delivery and placement | $300 | $700 | $1,500 | More if access is difficult |
| Electrical installation | $500 | $1,200 | $2,500 | Depends on panel capacity and wiring route |
| Used Jetsetter LX | $3,000 | $5,500 | $8,000 | Condition, age, and transport affect price |
What a Jetsetter LX costs as a three-person spa
Retail quotes for a new Jetsetter LX commonly land between $13,000 and $18,000 for the spa itself. A practical installed budget is about $14,000-$20,500 before tax, assuming a prepared, level base, ordinary delivery access, and a standard electrical connection. Local dealer inventory and packages can move the quote outside these ranges.
The LX is a compact, premium Hot Spring model, generally described as seating three people. Buyers should confirm the exact model year, dimensions, electrical requirements, included accessories, and warranty in writing, especially when a dealer uses a display or closeout unit to quote a lower price. For a typical new purchase, budgeting around $16,000-$19,000 installed before tax is a reasonable starting point.
Assumptions: U.S. dealer purchase, standard configuration, prepared installation area, and no major electrical or landscaping work.
How the spa, wiring, and delivery shape the quote
A dealer quote can bundle the spa with accessories and installation, so each line item matters when comparing offers. The following estimates show common cost components; package pricing may combine or discount them.
| Quote component | Typical range | What changes the charge | Pricing basis |
|---|---|---|---|
| Jetsetter LX spa | $13,000-$18,000 | Model year, dealer, package | Per tub |
| Electrical circuit | $500-$2,500 | Panel work, wire length, trenching | Per installation |
| Delivery and placement | $300-$1,500 | Distance, stairs, crane or special access | Per delivery |
| Base preparation | $300-$1,500 | Concrete, pavers, leveling, site condition | Per pad or area |
| Steps, cover, and lifter | $300-$1,000 | Included package and accessory quality | Per set |
| Sales tax | Varies by locality | State and local tax rate | Percentage of taxable sale |
Electrical labor commonly runs about $75-$125 per hour, although contractors may quote the full job rather than an hourly rate. A longer cable route, new breaker, or panel upgrade can add materially to the bill.
Compare the same scope, not just the advertised tub price. Ask whether delivery, startup, cover, steps, removal of an old spa, and sales tax are included.
Which Jetsetter LX specifications and site conditions raise the price?
Electrical scope is a major variable. A short run from a suitable electrical panel may keep work near the lower end, while a route over roughly 50 feet, underground trenching, or an undersized panel can push the electrical bill toward $1,500-$2,500 or more. The electrician should verify the model’s current installation requirements before work begins.
Access also affects delivery. A ground-level path with clear access is usually less expensive than moving the spa through a narrow gate, over steps, or across a deck. A crane or specialized placement can add hundreds to more than $1,000. A stable, level surface is essential; replacing a weak deck or building a new concrete pad is separate construction work.
Package details change the effective price as well. A quote with a cover lifter, steps, water-care supplies, and startup may cost more upfront than a bare spa price but less than buying each item later. Confirm the exact inclusions and electrical requirements before treating two quotes as comparable.
What delivery and electrician labor usually add
Most straightforward installations can be completed within a day once the base and electrical circuit are ready. The electrician may need a separate visit, and site preparation can take longer if concrete must cure or a route must be cleared. A rushed delivery or tight scheduling window may limit available crews and raise service charges.
For a simple placement and electrical hookup, delivery and labor together often add about $800-$2,000. Difficult access, panel upgrades, or construction can lift the total above that range. Getting the site checked before ordering helps prevent surprise labor charges and rescheduling fees.
How dealer prices shift between U.S. markets
Dealer prices vary with competition, freight, inventory, and local installation rates. In dense coastal markets or high-cost metro areas, installed quotes may run roughly 5%-15% above a lower-cost market. Rural buyers may face lower labor rates but higher delivery charges when the dealer or service crew is far away.
Seasonal promotions and end-of-model-year inventory can reduce the tub price, often by several hundred to a few thousand dollars, but selection may be limited. Ask whether a discount applies to a new-in-box unit, a floor model, or a previous model year, and verify warranty start dates and any cosmetic condition. Use local written quotes to judge the market rather than relying on a national advertised price.
When a used Jetsetter LX costs less than a new one
A used Jetsetter LX often sells for $3,000-$8,000, depending on age, condition, service history, and whether the seller includes a cover or steps. Moving a used tub can cost $500-$1,500, and buyers may need to pay separately for inspection, electrical reconnection, or repairs. A low purchase price is less attractive if the cover, pumps, or control system need replacement.
Compared with a new unit, a used spa may have limited or no transferable warranty. Before paying, check for leaks, test heating and jets, inspect the cabinet and cover, and request service records. Include transport and likely repairs when comparing used and new totals.
Which accessories and removal charges belong in the budget?
Common add-ons include steps at roughly $150-$400, a cover lifter around $150-$500, and water-care supplies costing about $100-$300 to start. Some dealers include these items in a package; others list them separately. Confirm whether the quoted cover is new and appropriately fitted to the specific model.
Removing an existing spa may add about $200-$800 for ordinary removal and disposal, with more for difficult access or a crane. Old electrical wiring, deck repairs, or hazardous materials are separate concerns. Ask for removal and disposal as distinct quote lines so they are not hidden in a delivery charge.
How to lower a Jetsetter LX purchase price
Compare at least three local dealer quotes with the same model year, accessories, delivery terms, and warranty. Ask for the cash price and the installed price separately, then negotiate optional items rather than removing required electrical or site work. A floor model or prior-year spa can offer savings, but inspect its condition and clarify warranty coverage.
Prepare a level base and clear the delivery route before the crew arrives. Avoid paying for accessories that are already included, and consider whether an existing suitable pad can be reused. Schedule outside peak demand when dealer inventory allows, but do not accept an unsuitable substitute simply to secure a discount. The safest savings come from controlling scope and comparing complete, written quotes.