Andersen storm doors typically cost $300-$1,000 for the door and about $600-$1,500 installed, depending on series, size, glass options, and labor. Andersen is best known for storm doors rather than conventional primary front-entry doors, so buyers seeking a complete exterior entry-door replacement should confirm they are comparing the same type of product.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Andersen storm door | $300 | $600 | $1,000 | Door only; series and options affect price |
| Professional installation | $250 | $400 | $650 | Standard opening, no major repairs |
| Installed storm door | $600 | $1,000 | $1,650 | Door, labor, and typical fitting |
| Primary entry-door replacement | $1,200 | $3,000 | $6,000+ | Different project involving the main exterior door |
What Andersen storm doors cost by series and scope
For a standard-size Andersen storm door, a practical door-only budget is $300-$1,000. Basic models with simpler hardware and interchangeable or retractable screen features tend to land near the low end; fuller-view glass, premium hardware, custom colors, and upgraded features can push the price higher. Retailer, region, and promotions also affect the shelf price.
With professional installation, many straightforward replacements total $600-$1,500. The average project is around $1,000 when the opening is square, the existing frame is usable, and the new door is a standard size. Assumptions: U.S. standard opening, midrange storm door, normal access, and no structural repairs. The door itself is only part of the installed price; fitting and site condition can shift the total substantially.
Andersen product listings and retailer quotes can differ in included hardware, installation kit, and configuration. A quote should identify the exact series, dimensions, finish, handle set, screen or glass arrangement, delivery, and labor rather than listing only “Andersen door.”
How glass, hardware, and installation split the quote
Typical line items for a standard replacement are shown below. Actual quotes may combine materials and labor, and local tax or delivery may be added separately.
| Cost component | Low | Average | High | What changes it |
|---|---|---|---|---|
| Door and frame kit | $300 | $600 | $1,000 | Series, finish, size, glass configuration |
| Labor | $250 | $400 | $650 | Fit, adjustment, installer minimum |
| Hardware or accessories | $0 | $50 | $150 | Handle, closer, lock, upgraded finish |
| Removal and disposal | $25 | $75 | $150 | Old door condition and haul-away |
| Frame or trim repair | $0 | $150 | $500+ | Rot, loose trim, or out-of-square opening |
Labor commonly runs about $75-$125 per hour, but many installers quote a flat rate or minimum charge instead. A simple installation may take 2-4 hours; added repair work can extend the visit. Request separate prices for the door, installation, disposal, and repairs so a low product price does not conceal a higher project total.
Which opening sizes and door features raise the price
Standard width and height are generally less expensive than nonstandard dimensions because they are easier to source and fit. If the opening is outside the model’s listed size range, a special order, alteration, or different product may be needed; the added amount depends on the supplier and installation approach. Measure the opening at several points and have the installer verify the dimensions before ordering.
Features can also change the quote. Full-view glass, retractable screens, color choices beyond common finishes, upgraded locks, and decorative hardware may add tens to a few hundred dollars compared with a basic configuration. A door exposed to heavy use may justify stronger hardware, while paying for features that will not be used adds expense without solving a specific need.
Opening condition is a major cost driver. A sound, square frame keeps labor close to a basic installation. A difference of roughly 1/4 inch or more across measurements, damaged mounting surfaces, or deteriorated trim can require shimming, carpentry, or a revised fit. Confirm the opening dimensions and frame condition before accepting a final price.
How long Andersen storm door installation takes
A direct replacement typically takes one installer about 2-4 hours, including removal of the old unit, assembly, mounting, and adjustments. A first-time installation or a job with a poorly aligned frame may take 4-6 hours or require a second visit for corrections or parts. A contractor may charge a minimum even when the work takes less than a half day.
At $75-$125 per labor hour, the arithmetic for a 3-hour job is $225-$375 before travel, minimum charges, or overhead. Flat-rate bids may be higher or lower depending on the company’s service area and what is included. Check whether the price covers closer adjustment, latch alignment, cleanup, and removal of the old door. Time estimates are most useful when the quote also states what tasks are included.
When removal, delivery, or frame repair adds expense
Old-door removal and disposal may add $25-$150, especially if the installer must haul away bulky material or the existing unit is difficult to detach. Delivery can be included in a retailer’s price or appear as a separate fee, often around $25-$100 depending on distance and service. Ask whether the door will be delivered to the home or only to the store.
Repairing rotten wood, replacing trim, or correcting a mounting surface can add $100-$500 or more. Extensive exterior carpentry is typically quoted separately from storm-door installation. If the primary entry door or its frame is damaged, a storm door will not correct that underlying problem. Have any repair allowance written as a range, with approval required before extra work begins.
How Andersen compares with a primary entry-door replacement
An Andersen storm door sits outside an existing exterior door; it is not a substitute for replacing that main door. A storm door can add a layer of protection and provide ventilation, but it does not replace a damaged or poorly sealed primary unit. If the quote is for a complete front-door replacement, expect a much larger project budget—often $1,200-$6,000 or more installed—because it may include a slab or prehung unit, frame work, trim, and finish repairs.
Compare quotes only when they cover the same scope. For storm doors, confirm size, glass and screen setup, hardware, installation, and disposal. For primary doors, compare material, glazing, frame, threshold, finish, and trim work. A lower storm-door quote is not a meaningful substitute for a primary-door quote when the projects solve different problems.
Ways to keep the Andersen door installation price controlled
Choose a standard size and readily available configuration when those options meet the home’s needs. Keep existing trim and hardware if they are sound and compatible, and arrange the work during normal scheduling rather than requesting urgent service. Avoid paying for specialty finishes or upgrades unless they provide a clear durability, security, or usability benefit.
Get at least two or three written estimates using the same model and scope. Ask each installer to identify labor, removal, delivery, repair allowances, and any trip or minimum charge. If the frame is damaged, compare the cost of repair with the cost of replacing the storm door before ordering; installing a new unit on an unsuitable frame can lead to extra labor or poor operation. The most dependable savings come from accurate measurements, a stable opening, and comparable written quotes.