Moving an electric stove outlet typically costs $200-$900, with a common midrange quote around $450-$600 for a short relocation with accessible wiring. The price rises when the 240-volt circuit must be extended through finished walls, the panel needs work, or a permit and inspection are required.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Short outlet move | $200 | $450 | $750 | Nearby location, open access |
| Move through finished walls | $500 | $900 | $1,500 | Longer wiring route and patching |
| New 240-volt circuit | $600 | $1,200 | $2,500 | New cable from panel; panel work can add cost |
| Gas range receptacle move | $150 | $300 | $600 | Usually a standard 120-volt outlet |
Assumptions: U.S. contractor pricing, standard residential access, and no major electrical panel replacement.
Typical prices for moving a 240-volt stove outlet
Most quotes for relocating an existing electric range receptacle fall between $200 and $900. A short move of a few feet may cost $200-$450 if the electrician can route cable through an unfinished basement, crawlspace, cabinet area, or open wall. A more involved relocation with drywall access and repair often reaches $500-$1,500.
For a straightforward move, budget about $450-$600 before optional drywall finishing or permit fees. These estimates assume the existing circuit has the correct capacity and condition for the appliance. A typical electric range uses a dedicated 240-volt circuit, often 40 or 50 amps; the electrician must verify the appliance requirements, wire size, breaker, and receptacle type.
What the electrician’s stove-outlet quote includes
Labor and cable routing usually account for most of the bill. Quotes may also include a new receptacle, box, breaker, permit, or wall opening and patching. Ask whether painting is included: electrical contractors often leave finish work to a separate drywall or painting professional.
| Quote component | Typical price | What changes the charge |
|---|---|---|
| Electrician labor | $100-$175 per hour | Travel, minimum charge, access, and crew time |
| Cable, box, receptacle | $40-$200 | Wire gauge, run length, and outlet type |
| Breaker or circuit work | $75-$350 | Compatibility and available panel space |
| Permit and inspection | $50-$250 | Local jurisdiction and scope |
| Wall repair and paint | $100-$500 | Number and size of openings; finish level |
Confirm that the written quote identifies labor, materials, permit charges, and surface repairs separately.
How cable distance, wall access, and circuit size change the price
Distance matters because an electrician may need more cable, additional supports, and a longer route back to the panel. A move within roughly 3-6 feet is generally less expensive than a 10-20-foot reroute, especially if the route crosses finished rooms or requires drilling through framing. The shortest visible path is not always the safest or code-compliant path.
Wall construction also affects labor. Open studs, an accessible basement, or removable cabinets can keep a job near the lower range. Tile backsplashes, masonry, concrete, or finished ceilings may add $150-$600 or more for careful access and repair. If the existing circuit is undersized, damaged, shared improperly, or incompatible with the range, correction can push the total beyond $1,500.
A new circuit or panel upgrade is a different scope from simply moving an existing outlet. Panel replacement can add roughly $1,500-$4,000, depending on capacity, location, and required service changes; it is not normally needed for a basic outlet relocation.
How long the 240-volt relocation takes
A simple relocation may take 2-4 hours on site. Routing cable through finished walls, installing a longer run, or coordinating inspection can extend the work to a full day or require a return visit. Electrical labor commonly runs $100-$175 per hour, though many contractors set a service minimum of $150-$300.
Power to the range circuit will be shut off during the work, and the appliance may need to be pulled out and reconnected. Confirm who handles moving the stove, reconnecting its anti-tip bracket, and testing it. Scheduling drywall repair separately can prevent paying an electrician’s rate for finish work.
Regional labor rates for range outlet work
Prices in high-cost metro areas, including parts of the Northeast, West Coast, and major cities, can run about 15%-35% above the national midrange. Rural markets and lower-cost regions may come in 10%-20% below it, although travel charges and fewer available contractors can offset savings.
Local permit rules differ, and some jurisdictions require a permit or inspection for circuit changes. A permit may add $50-$250, while unusually strict access or code requirements can increase labor. Compare quotes for the same scope rather than treating a low bid without permit or repair details as equivalent.
Three stove outlet moves and their estimated totals
| Job scenario | Work and labor | Estimated total |
|---|---|---|
| Move 3 feet in an open basement | 2-3 hours; short cable run; reuse suitable circuit | $250-$500 |
| Move 8 feet through a finished kitchen wall | 4-6 hours; new cable and box; minor patching | $600-$1,100 |
| Move 15 feet and replace an unsuitable circuit | 6-10 hours; new cable, breaker, permit, wall repair | $1,200-$2,500 |
Assumptions: Midrange U.S. labor, standard range circuit, and no service-panel replacement. Local quotes can differ.
These examples show why a site visit matters: the same outlet location can require very different cable routes.
When a gas range outlet costs less to relocate
A gas range generally needs a 120-volt receptacle for ignition and controls, rather than the dedicated high-amperage circuit used by most electric ranges. Moving that outlet may cost $150-$600 if an existing general-purpose circuit can serve it and access is easy. A new circuit, unusual location, or extensive wall repair can raise the total.
Before comparing prices, confirm whether the appliance is electric, gas, or dual-fuel. The outlet, circuit requirements, and applicable work differ. For an electric range, a 120-volt receptacle is not a substitute for the required 240-volt supply.
Ways to reduce the stove outlet moving cost
Keep the new location close to the existing circuit when appliance placement allows, and ask the electrician to assess routes through a basement, crawlspace, or cabinet before opening finished walls. Move the stove and clear the work area only if the contractor confirms it is safe and included tasks will not be affected.
Get two or three itemized quotes describing the same location, cable distance, circuit rating, permit, and repair scope. Avoid paying for a new circuit if the existing one is compliant and suitable, but do not accept reused wiring without verification. Choosing a practical outlet location and separating electrical work from cosmetic repairs are often the most controllable savings.