N-Hance refinishing typically costs $1,500-$5,000 for kitchen cabinets and about $1.50-$5 per square foot for wood floors, depending on the service and condition. Room size, finish choices, repairs, local franchise pricing, and access affect the final quote; N-Hance does not publish one fixed national rate.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cabinet refinishing | $1,500 | $3,000 | $5,000+ | Typical kitchen, existing cabinets retained |
| Wood floor refinishing | $1.50/sq ft | $3/sq ft | $5/sq ft | Finish refresh to more involved restoration |
| Cabinet color change or added repairs | $2,500 | $4,000 | $7,000+ | Price varies with door count and prep |
| Floor repair and refinishing | $3/sq ft | $5/sq ft | $8+/sq ft | Includes more extensive sanding or repair |
Typical N-Hance prices for kitchen cabinets and wood floors
For a standard kitchen with roughly 20-30 cabinet doors and drawer fronts, a N-Hance cabinet refinishing quote commonly falls between $1,500 and $5,000. A straightforward color refresh may be near the lower end; extensive cleaning, repairs, or a more involved color change can push the price higher. Replacing cabinet boxes or doors is generally a different, more expensive scope than refinishing.
For wood floors, a basic refresh may run about $1.50-$3 per square foot, while more extensive refinishing may cost $3-$5 per square foot. A 500-square-foot area could therefore total roughly $750-$2,500 before unusual repairs, furniture moving, or additional work. Assumptions: U.S. metro-area pricing, typical access, sound wood surfaces, and standard finishes. Cabinet and floor quotes should be compared separately because the work and pricing units differ.
What cabinet prep, floor labor, and materials add to the quote
A contractor’s estimate may combine surface preparation, application, materials, and job setup into one price. Ask which tasks are included, especially repairs, masking, cleanup, and moving contents or furniture. A quote that looks lower may exclude important prep or charge separately for it.
| Cost component | Cabinet work | Floor work | What affects the charge |
|---|---|---|---|
| Preparation | $300-$1,000 | $0.50-$1.50/sq ft | Cleaning, masking, sanding, or surface condition |
| Labor and application | $800-$2,500 | $1-$3/sq ft | Door count, room layout, coats, and crew time |
| Materials and finish | $200-$800 | $0.50-$1.50/sq ft | Finish system, color, and product quantity |
| Repairs and disposal | $100-$1,000 | $100-$800 | Damaged surfaces, trim, or debris handling |
Labor is generally built into a project quote rather than listed as an hourly bill. For comparison, local finish-work labor may equate to about $50-$100 per hour, but actual N-Hance pricing depends on the franchise and scope. Request an itemized scope so preparation and repairs are not mistaken for optional upgrades.
How door count, floor area, and damage change N-Hance pricing
Cabinet size is often measured by the number of doors and drawer fronts, not simply kitchen square footage. A kitchen with 15-20 fronts may cost less than one with 35-45, particularly if both sides or detailed profiles need work. A shift from a simple refresh to a major color change can also require more preparation and coats.
Floor area changes the total directly: at $2-$4 per square foot, each additional 100 square feet adds about $200-$400. Condition matters too. Light wear differs from deep scratches, water damage, loose boards, or a floor that needs substantial sanding. Damage and added surface area are two of the clearest reasons a quote can exceed a basic estimate.
Species and previous coatings may affect how a floor can be treated, while cabinet veneer or laminate can limit suitable refinishing methods. Ask the estimator to identify any material-specific limitation before selecting a finish. Price thresholds are estimates, not guaranteed N-Hance rates; franchise inspection and local labor determine the actual quote.
How long cabinet and floor refinishing takes on site
Cabinet projects often require several workdays, though the exact schedule depends on preparation, drying time, kitchen size, and whether the doors are handled on site or elsewhere. Homeowners may need to clear counters and cabinet contents before work begins. Confirm when the kitchen can be used again, rather than relying only on the number of active labor hours.
A single open floor area of 500-1,000 square feet may take roughly one to several days, depending on the service type, repairs, and finish curing. Moving furniture, working around occupied rooms, or handling multiple small rooms can extend the schedule. Ask for both workdays and return-to-use timing in writing.
Three sample N-Hance quotes for common project sizes
These examples illustrate plausible budgets rather than official offers. They assume standard access and no major structural repairs; franchise quotes and included services vary.
| Project | Scope and rate | Estimated total | Why it costs that amount |
|---|---|---|---|
| Small cabinet refresh | 18 fronts; basic preparation | $1,800-$2,800 | Limited door count and straightforward finish |
| Average kitchen color update | 28 fronts; moderate prep | $3,000-$4,800 | More application and masking time |
| Living room floor refresh | 600 sq ft at $2-$4/sq ft | $1,200-$2,400 | Area-based charge, excluding major repairs |
A floor with damaged boards or deep wear may instead reach $3-$8 per square foot after repair and more intensive refinishing. Use the same door count, floor area, finish, and repair assumptions when comparing bids.
When repair or a simpler finish lowers the project price
Keeping sound cabinet boxes and doors is generally less expensive than replacing them. If only a few doors are damaged, ask whether targeted repair is practical and whether the finish can be matched. For floors, clarify whether a refresh is suitable before paying for full sanding or replacement; not every worn floor needs the most intensive treatment.
Choose a standard color or finish where possible, and remove cabinet contents or small movable items before the crew arrives if the contractor permits it. Avoid adding unrelated work unless it can be priced clearly. Controlling the scope usually saves more than negotiating a small discount on a large project.
How local franchise rates and project access affect the estimate
N-Hance locations operate through local franchises, so labor rates, minimum charges, travel, and available services differ by market. High-cost urban areas may quote 10%-25% above lower-cost markets, while remote locations can add travel or scheduling charges. These differences are not universal; the local franchise’s written estimate is the best basis for budgeting.
Stairs, tight parking, limited work hours, occupied rooms, or difficult furniture moves can add labor or require a separate charge. Ask whether the quote includes travel, protection, cleanup, and disposal, and whether taxes apply. Compare at least two local estimates with matching project specifications, not headline prices alone.
Questions to ask before accepting a N-Hance quote
Confirm the measured floor area or number of cabinet fronts, named finish, repair allowance, and number of coats. Ask which tasks are excluded, what could trigger a change order, and whether the price includes moving items, cleanup, and applicable taxes. For flooring, request details on sanding, dust control, finish curing, and any limits on existing damage.
Check the warranty terms, including what surfaces and workmanship are covered and how long coverage lasts. A lower quote may reflect a narrower scope rather than a better deal. A complete written estimate makes it easier to identify both the total price and the conditions that could raise it.