Hunter Douglas banded shades typically cost about $250-$900 per window, with a midrange installed price near $500. Shade width and height, fabric, control type, installation needs, and local dealer pricing drive the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| One custom shade, installed | $250 | $500 | $900 | Standard fabric and manual control at low end |
| Shade only | $180 | $375 | $700 | Price varies by size and fabric |
| Motorized upgrade | $200 | $350 | $600 | Per shade; control equipment may add more |
| Four-window project | $1,000 | $2,000 | $3,600 | Custom shades with typical installation |
What one Hunter Douglas banded shade usually costs
For a standard window around 30-36 inches wide and 48-60 inches tall, budget roughly $250-$550 installed with manual operation and a common fabric. A larger shade, upgraded fabric, or motorized control can bring the total to $600-$900 or more. These shades use alternating sheer and opaque fabric bands to adjust light and privacy.
For a typical room, the installed price is often $350-$650 per window. The estimate assumes a standard inside or outside mount, ordinary access, and no major trim work. Custom sizing and dealer-selected options can change the price substantially.
Assumptions: U.S. dealer pricing, standard fabric, normal access, and professional installation; regional quotes vary.
How fabric, controls, and installation shape the quote
A dealer quote may combine the shade, control hardware, measurement, installation, and delivery. The breakdown below shows common planning ranges per window; dealer invoices may group charges differently.
| Quote component | Low | Average | High | Typical basis |
|---|---|---|---|---|
| Shade and fabric | $180 | $375 | $700 | Custom size and fabric tier |
| Manual control hardware | $0 | $35 | $75 | Often included in base configuration |
| Motor and power parts | $200 | $350 | $600 | Per motorized shade |
| Measurement and installation | $75 | $150 | $275 | Per window or project allocation |
| Delivery and disposal | $0 | $25 | $75 | May be waived or bundled |
Fabric and control choices usually account for the largest price differences. Installation charges may be a flat project fee rather than a separate charge for each window.
Which shade sizes, fabrics, and motors raise the price?
Size is a major driver because custom shades are priced to fit each opening. A narrow window under 30 inches wide may land near the lower range, while a shade over 48 inches wide or 72 inches tall can cost 20%-50% more, depending on fabric and construction. Very wide openings may require special configuration or separate shades.
Fabric selection also matters: basic options tend to cost less than premium textures, colors, or specialty performance fabrics. Motorization commonly adds $200-$600 per shade, and a hub or multi-shade control system may add another $100-$300. Confirm whether the quote includes power supplies, remotes, and any required hub.
How installation labor varies by window and access
Professional installation commonly adds $75-$200 per shade, though dealers may set a minimum visit charge of about $150-$300. A straightforward installation can take 30-60 minutes per window; multiple windows in one visit usually reduce the labor cost per shade. Installation can take longer when the installer must work around tall ceilings, hard-to-reach openings, or unusual trim.
Ask whether measuring and installation are included or billed separately. A paid measurement visit may cost $50-$150, sometimes credited toward the order. Existing shades may require removal, typically adding $10-$30 per opening if disposal is not included.
Why dealer prices differ across U.S. regions
Quotes in high-cost metro areas, including parts of the Northeast and West Coast, may run 10%-25% above comparable projects in lower-cost markets. Rural customers may face fewer local dealers and a travel or minimum-service charge of $50-$150. Differences can reflect labor rates, dealer discounts, local operating costs, and project size—not necessarily a different shade specification.
Compare quotes using the same measurements, fabric, control, and installation scope. A quote that appears lower may exclude measurement, delivery, or motor accessories. Verify the product name and each window’s dimensions before comparing totals.
Three window-count examples show realistic project totals
These examples use estimated installed prices and assume normal access. Actual custom quotes depend on exact measurements and selected options.
| Project | Specification | Estimate |
|---|---|---|
| Two small windows | 30 by 48 inches, manual controls, about $350-$500 each | $700-$1,000 |
| Four standard windows | 36 by 60 inches, mid-tier fabric, about $425-$650 each | $1,700-$2,600 |
| Six large windows | 48 by 72 inches, premium fabric and motors, about $750-$1,100 each | $4,500-$6,600 |
Project totals can fall below per-window estimates when several shades are installed together. Conversely, a small order may carry a minimum measurement or installation fee.
How to lower a banded-shade quote without losing function
Choose a standard fabric and manual control in rooms where remote operation is unnecessary. Motorize only hard-to-reach or frequently adjusted windows, and ask whether a shared control hub can serve several shades. Ordering multiple windows at once may reduce service charges and sometimes qualify for dealer pricing.
Keep the quote tightly scoped and compare at least two itemized offers. Provide the same window measurements and request separate prices for fabric, controls, installation, and delivery. Avoid paying for upgraded controls or accessories unless they solve a specific need; confirm any promotion or discount applies to the exact selected product.