Hunter Douglas EverWood blinds typically cost about $180-$550 per window before installation, with an installed average near $400 for a standard-size window. Final pricing depends on blind dimensions, operating features, dealer labor, and whether old treatments need removal; custom or oversized windows can cost considerably more.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Blind, per window | $180 | $350 | $700 | Custom faux-wood blind; size and options affect price |
| Installation, per window | $50 | $90 | $175 | Professional measuring and mounting |
| Installed, one standard window | $230 | $440 | $875 | Before unusual access or removal charges |
| Five-window order | $1,150 | $2,200 | $4,375 | Similar standard windows; dealer pricing varies |
What EverWood blinds cost for standard windows
For a typical 30-by-50-inch window, a Hunter Douglas EverWood blind may run about $180-$400 for the product and roughly $50-$125 for installation. A reasonable planning range is $250-$525 installed per window, assuming a standard color, straightforward inside mount, and no old-blind disposal. The quoted product price may differ by dealer and selected features.
Small, simple windows can fall below that range, while wide, tall, or unusually shaped openings can exceed it. A full-home order is usually priced from measured opening dimensions rather than a flat rate per room. For budgeting, use approximately $400 per standard window installed, then allow extra for large sizes and upgrades.
Assumptions: U.S. dealer pricing, standard faux-wood slats, normal access, and professional installation; estimates are not a manufacturer price list.
What dealer quotes include for slats and labor
EverWood quotes can combine the blind, measuring, installation, and optional operating upgrades. The table gives typical planning ranges for one standard window; dealer proposals may bundle these items or apply minimum service charges.
| Quote component | Typical price | What changes it | Pricing unit |
|---|---|---|---|
| EverWood blind | $180-$550 | Width, height, color, slat size | Per blind |
| Professional installation | $50-$125 | Mount type and access | Per window |
| Motorized or upgraded control | $100-$300 | Control system and configuration | Per blind, approximate add-on |
| Removal and disposal | $10-$40 | Existing treatment and local labor | Per window |
| Measuring or service minimum | $0-$150 | Dealer policy and order size | Per visit or order |
Check whether the quote separates product, installation, measuring, and removal so the total can be compared fairly.
How window width and slat size change the price
Dimensions are a primary price driver: a blind for a 24-by-36-inch opening generally costs less than one for a 60-by-72-inch opening because it uses less material and may require different hardware. Large spans, including widths above roughly 72 inches, can need a split treatment or additional support, increasing both product and installation charges. Exact size limits depend on the selected product configuration.
Slat width, finish, and controls also matter. A standard finish with manual tilt usually costs less than a premium color or motorized option. Inside mounts require adequate frame depth; shallow frames may call for an outside mount or extra preparation. Confirm finished opening measurements and mounting depth before approving a custom order, since made-to-measure blinds may not be returnable.
Can installation time raise the EverWood total?
A straightforward installation often takes about 20-45 minutes per window after measuring and preparation, while a multi-window visit may be faster per unit. Installers commonly charge a per-window rate or an hourly rate around $60-$125, sometimes with a minimum visit charge. The labor formula is .
Work can take longer when frames are uneven, mounting surfaces need repair, access is obstructed, or several blinds must be fitted to different opening types. Ask whether the dealer’s installation fee includes drilling, leveling, and a final operating check. Labor is easier to estimate when the installer measures every opening and identifies mount type before issuing the final quote.
Three EverWood order examples with installed totals
These examples illustrate how size and options affect a dealer estimate; they are not guaranteed quotes. They assume routine access and no structural repair.
| Example | Specifications | Estimated price | Installed total |
|---|---|---|---|
| Single bedroom | One 30-by-50-inch manual blind; 1 labor hour at $75 | $220-$380 blind | $295-$455 |
| Five standard windows | Each 30-by-50 inches; 3-4 crew hours at $75-$100 | $1,100-$1,900 blinds | $1,325-$2,300 |
| Three wide windows | Each about 60-by-60 inches; upgraded controls; 3-5 labor hours | $1,350-$2,400 blinds | $1,600-$3,025 |
Use the examples to compare scope, not just the bottom-line number: a larger blind or upgraded control can explain a substantial difference.
How local labor rates shift the installed price
Dealer availability and labor rates vary by market. Large metropolitan areas and high-cost coastal markets may price installation and custom products roughly 10%-25% above a national planning estimate. Smaller cities and rural areas may be about 5%-15% lower, though travel charges or limited dealer competition can offset that difference.
These are broad budgeting adjustments, not fixed regional tariffs. A local quote may also reflect taxes, delivery, dealer service policies, and installation minimums. Requesting itemized estimates from two or three authorized sellers can show whether a difference comes from the blind specification or labor. Compare quotes using identical dimensions, control options, mount style, and included services.
Ways to lower the EverWood blinds price without cutting fit
Keep the specification consistent across rooms: standard finishes, manual controls, and common slat sizes generally cost less than multiple custom combinations. If several windows need blinds, ask whether one measuring and installation visit reduces per-window fees. Grouping the order may also help avoid separate service minimums, but discount availability depends on the dealer.
Prepare clear, unobstructed access before installation and confirm whether old blinds can be removed without a paid disposal service. Avoid ordering from rough measurements alone; a measuring error can mean replacement expense for a custom product. Save money by simplifying options and bundling work, not by skipping professional measurement where fit is uncertain.
When an existing blind has a minor tilt or lift problem, ask whether the dealer can assess repair before replacing the entire treatment. Repair availability and parts coverage depend on the product’s age and issue, while a damaged or poorly fitting blind may make replacement more practical. Compare the repair charge with a written replacement quote before deciding.