Hunter Douglas honeycomb shades typically cost about $250-$900 per window, with an average near $500 before or including installation depending on the dealer quote. Shade size, fabric and opacity, operating system, product line, and local labor rates have the biggest effect on price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Standard custom shade | $250 | $500 | $900 | Typical installed price per window |
| Material and shade unit | $175 | $375 | $700 | Before installation; size and options vary |
| Installation | $50 | $125 | $250 | Per window; complex access may cost more |
| Large or motorized shade | $600 | $1,000 | $1,800+ | Oversize openings and powered controls increase cost |
What a custom Hunter Douglas shade costs per window
For a standard window around 30 by 60 inches, a manual custom honeycomb shade commonly lands at $250-$650 installed. A larger opening, premium fabric, room-darkening construction, or upgraded lift can bring the price to $650-$1,200 or more. Dealer promotions and quote structure can shift whether measuring and installation are included.
For a rough budget, multiply the number of similar windows by $400-$600. Eight standard windows would therefore be about $3,200-$4,800, while a mix of small, large, and specialty shapes could exceed that range. Assumptions: U.S. standard-size windows, midrange fabric, normal access, and professional installation. Most buyers should compare complete installed quotes, not just the shade-unit price.
How fabric, headrails, and labor appear on quotes
Dealers may present one bundled price or separate the product and installation. The breakdown below is a planning estimate for one standard custom shade; actual line items depend on the dealer and product configuration.
| Quote component | Low | Typical | High | What changes it |
|---|---|---|---|---|
| Shade and fabric | $175 | $300-$500 | $700+ | Dimensions, fabric, opacity, cell design |
| Lift and controls | $0-$40 | $40-$150 | $300+ | Manual, cordless, or motorized control |
| Labor and measuring | $50 | $75-$150 | $250 | Window count, access, and service minimum |
| Removal and disposal | $0 | $10-$30 | $60 | Existing treatment and haul-away service |
| Delivery and fees | $0 | $15-$60 | $100+ | Order size, delivery terms, and local charges |
Installation labor often works out to $75-$125 per hour, although many installers charge per window or apply a minimum trip fee. Confirm whether measuring, delivery, old-shade removal, and taxes are included before comparing totals.
Why window width, cell size, and lift choice change the price
Width and height affect fabric use and hardware, so a 60-by-72-inch shade may cost substantially more than a 30-by-60-inch unit. Windows wider than about 72 inches may need special hardware, multiple shades, or a separate configuration; unusually tall openings can also require a higher-priced build.
Single-cell shades generally cost less than double-cell versions, which use more material and can improve insulation. Room-darkening fabrics, specialty colors, top-down/bottom-up operation, and motorization add cost. Powered control can add roughly $150-$500 or more per shade, especially when a hub, remote, or electrical work is needed. Ask for the price difference by feature so upgrades are not bundled without a clear comparison.
How installation and window count affect the final bill
A straightforward installation may take about 15-30 minutes per window after measuring and preparation. A whole-home order can reduce per-window labor when all openings are ready in one visit, but a small order may still carry a minimum service charge of roughly $100-$250. High windows, masonry, unusual trim, or difficult ladder access can add time and expense.
Some dealers include professional measuring in the product quote; others charge about $50-$150 for a visit, sometimes crediting that fee toward an order. Provide accurate opening measurements and photos early, but use the dealer’s final measuring process for a custom order.
Which Hunter Douglas honeycomb options cost less
Manual lift shades with standard fabric and common colors usually sit at the lower end of the product range. Cordless operation, specialty cellular configurations, premium textiles, and motorization raise the quote. A less expensive brand of cellular shade may cost $100-$400 per window installed, but fabric selection, fit, warranty, and control options may differ.
Repair can make sense when the fabric is sound and only a component needs attention. A service visit may cost $75-$200, with parts extra; replacing a shade is more likely to be economical when fabric is damaged or several mechanisms have failed. Compare repair cost with a complete replacement quote before ordering new shades for every window.
Regional labor rates shift installed shade prices
Installed quotes in high-cost metro areas, including parts of the Northeast and West Coast, can run roughly 10%-25% above a national midrange estimate. Smaller cities and rural markets may come in 5%-15% lower, although travel fees can erase the difference when a dealer is far away. These are broad planning adjustments, not fixed regional tariffs.
Labor availability, dealer overhead, sales promotions, and delivery distance all influence local pricing. Use local written quotes for the final budget, especially for large orders or motorized systems.
When add-ons push a shade order beyond budget
Removing old blinds, repairing trim, adding a hub or remote, and wiring power can add $10-$60 per window for basic removal or considerably more for electrical work. Minimum installation charges are common on one- or two-window orders. Specialty shapes and multiple shades on one opening can also require custom pricing rather than standard per-window estimates.
Ask whether the quote includes sales tax, delivery, measuring, disposal, and any required control accessories. Separate required work from optional upgrades to see the true installed price.
Ways to lower a multi-window honeycomb quote
Keep the scope consistent across bids: list each opening’s dimensions, inside- or outside-mount preference, desired opacity, and control type. Request separate prices for manual and motorized operation, standard and upgraded fabrics, and any top-down/bottom-up option. Ordering several windows together may reduce repeat measuring or trip charges.
Standard colors and fabrics can cost less than special-order selections, and preserving usable existing hardware may avoid replacement expense where compatible. Avoid choosing a shade solely by its lowest unit price if installation, warranty, or required controls are excluded. A comparable written quote should show per-window pricing and every included service.