A Husqvarna concrete saw typically costs about $1,100-$3,000 for a handheld gas model, while walk-behind models can range from roughly $4,500 to more than $40,000. The final price depends mainly on saw type, engine or power system, cutting depth, blade, dealer, and whether the purchase includes delivery or setup.
The figures below are practical U.S. retail estimates, not fixed manufacturer pricing; local quotes and inventory can differ. Assumptions: new equipment, standard configuration, before sales tax, with regional dealer variation.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Handheld gas saw | $1,100 | $1,700 | $3,000 | Model, power, and cutting depth drive price |
| Electric handheld saw | $900 | $1,600 | $2,500 | Tool-only or kit pricing varies |
| Walk-behind saw | $4,500 | $12,000 | $40,000+ | Compact and professional models differ sharply |
| Diamond blade | $100 | $300 | $900 | Diameter, bond, and material rating affect cost |
| Typical setup with blade | $1,250 | $2,000 | $3,900 | Handheld saw plus compatible blade and basic accessories |
Dealer prices can differ by roughly 5%-15% between markets because of freight, local competition, inventory, and service availability. A buyer in a large metro area may find multiple dealers and occasional equipment discounts, while a rural buyer may face freight charges or limited access to service. These are broad market patterns, not guaranteed regional price rules.
Freight matters more for walk-behind saws than for handheld models. A handheld saw may be available for local pickup or modest delivery, while a heavy floor saw can add several hundred dollars for shipping or specialized handling. A local dealer’s slightly higher sticker price may be competitive if it includes setup, nearby parts support, or a demonstration.
Sales tax is additional and varies by state and locality; a $2,000 purchase can add roughly $100-$200 in many locations. Some business buyers may have tax treatment or resale documentation that changes what they pay at checkout, but requirements are state-specific. Quotes should state whether tax and delivery are included so that the final comparison uses the same basis.
Compare the delivered, tax-adjusted total rather than the advertised price alone. Request quotes from at least two authorized or established dealers, especially for a walk-behind model, and ask whether the price includes setup, warranty registration, and first-service guidance.
How long setup and concrete cutting labor usually takes
Buying a saw does not include labor to operate it. A contractor may charge approximately $75-$150 per worker-hour, with higher rates possible for specialized floor cutting, difficult access, or urgent scheduling. A two-person crew at those rates can represent $150-$300 per hour before equipment, travel, water management, or disposal charges.
A small, accessible opening or a few short cuts may take 1-3 hours of cutting and setup, but a service minimum can make the invoice higher than the actual blade-on-concrete time. Longer slab cuts, reinforced concrete, overhead work, or restricted access can extend the job and require a larger crew or additional equipment. Ask whether the estimate is hourly, per linear foot, or a fixed project price.
For per-foot estimates, a straightforward slab cut may be quoted around $5-$15 per linear foot for shallow, accessible work; deeper cuts, reinforcement, and mobilization can raise the rate to $15-$40 or more per foot. These service prices are not equivalent to the saw’s purchase cost and typically depend on depth, site conditions, and the contractor’s minimum charge.
Provide the contractor with cut length, slab thickness, reinforcement details, access conditions, and disposal needs before requesting a fixed quote. Photos and a simple sketch can reduce estimate revisions, while a site visit may be necessary for structural work or uncertain utilities.
Three Husqvarna saw budgets for common buying scenarios
A homeowner or small maintenance crew needing occasional cuts might choose a handheld gas saw in the K 770 class. A sample budget could include $1,200-$1,600 for the saw, $150-$350 for a compatible blade, and $50-$150 for fittings or pickup-related charges. The total before tax would be about $1,400-$2,100. Rental may cost less for a single brief project.
A contractor making frequent deeper cuts might compare a higher-powered handheld model and a premium blade. For example, a K 970-class saw at $1,600-$2,200, a 16-inch blade at $250-$600, and $100-$250 in accessories or delivery produces an estimated pre-tax purchase total of $1,950-$3,050. A dealer inspection package or spare blade can push the budget higher.
A crew cutting long slab runs may need a walk-behind saw instead of a handheld unit. A compact machine at $5,000-$8,000, an appropriate blade at $300-$900, and $200-$600 for delivery or setup yields roughly $5,500-$9,500 before tax. A larger commercial machine could raise the equipment budget to $15,000-$40,000 or more, especially with higher capacity and advanced controls.
These examples show why a saw’s purchase price should be compared with the work volume it will handle. A high-priced floor saw is difficult to justify for a one-time cut, while repeated rental fees or subcontractor charges may make ownership worth evaluating for ongoing work. Example ranges are illustrative; verify model availability and package contents with a local seller.
Should buyers rent, repair, or buy a different saw?
For a one-day project, renting a handheld concrete saw often costs about $75-$200 per day, while a walk-behind saw may rent for $150-$500 per day, before blade wear, delivery, fuel, or damage deposits. Weekly rates can reduce the daily equivalent, but the renter should confirm blade charges, pickup hours, and responsibility for dust or slurry control.
Ownership becomes more attractive when use is frequent, the correct saw is already known, and service access is reliable. A simple comparison is to divide purchase and expected maintenance costs by the number of rental days avoided. For instance, a $1,800 handheld package compared with a $150 daily rental breaks even after about 12 rental days, before accessories, repairs, and resale value are considered.
Repair can be less expensive than replacement when the machine has a clear, isolated issue. Routine service, filters, plugs, belts, or minor parts may cost roughly $50-$300, while larger engine or drive repairs can reach $300-$1,000 or more. Get a diagnosis before approving extensive repairs on a heavily used saw, and compare the repair quote with the price of a tested used unit or new entry-level model.
Used Husqvarna saws may sell for approximately 40%-70% of a comparable new price, depending on age, condition, service records, and included blade. A low listing price can hide worn bearings, a tired engine, damaged guards, or missing water fittings. A seller should permit a cold start and demonstrate operation; buyers should also confirm serial information and whether any warranty transfers.
For a single project, compare rental and contractor service against the full purchase package; for regular work, compare ownership against realistic annual rental days. The cheapest sticker price is not necessarily the lowest-cost choice if the saw needs repairs, lacks a required blade, or cannot handle the material and depth.
Where buyers can trim the Husqvarna saw budget
Choose capacity for the actual work rather than the largest model available. If most cuts are short and no deeper than about 5 inches, a compatible 14-inch handheld setup may avoid the extra expense of a larger saw and blade. For repeated cuts near 8 inches deep, under-sizing can slow the job or require a second pass, so confirm depth requirements before settling on a smaller model.
Compare complete packages, not just saw-only listings. Ask dealers to price the same model with the required blade, water kit, delivery, and setup, then remove accessories that are not needed. A package discount is useful only when included items match the job; a costly blade for the wrong concrete type does not create savings.
Schedule nonurgent work during periods when local contractors and dealers have more availability. Rush delivery, short-notice cutting, or peak construction demand may add charges, although the effect depends on the market. Combining several cuts at one site can also spread mobilization and delivery costs over more work.
Before cutting, mark the scope, confirm access, and identify utilities or structural constraints. Good preparation can limit added labor from delays and reduce the chance of a costly change order. Do not skip required dust controls, water management, personal protective equipment, or code and safety requirements to lower the quote.
The most reliable savings come from matching saw capacity to cut depth, comparing complete quotes, and avoiding unneeded upgrades. For occasional use, price rental and contractor service first; for routine work, include maintenance, blade replacement, freight, and resale value in the ownership budget.