Prices for an induction cooktop installed under a granite countertop vary by unit size, installation complexity, and regional labor rates. This article details the actual cost range, per-unit pricing, and how to plan a budget for an under-granite setup with clear drivers such as cutout size, electrical work, and finish options.
Assumptions: Midwest labor rates, standard 30-inch or 36-inch built-in unit, standard granite, no custom backsplash, basic professional installation.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Induction cooktop unit | $400 | $900 | $1,500 | Price varies by power (range 2.0–3.7 kW) and features |
| Granite cutout and install labor | $150 | $350 | $600 | Based on 30″ width; edge finishing may add |
| Electrical panel and wiring work | $150 | $400 | $1,000 | New circuit or dedicated line often required |
| Under-counter mounting kit and trim | $0 | $75 | $150 | Included with some models; otherwise add-on |
| Removal of old unit and disposal | $0 | $75 | $150 | Depends on accessibility |
| Permits or inspections | $0 | $60 | $200 | Rare for simple upgrades; may apply in some jurisdictions |
| Delivery | $0 | $25 | $75 | Within local service area |
Induction Cooktop Under Granite: Typical Price Ranges and What Influences Costs
Most buyers pay in the $1,000 to $2,350 range for a complete under-granite installation, including the cooktop unit and basic installation. The price ladder generally follows unit quality, required electrical work, and granite cutout complexity. A basic 30-inch model in a standard kitchen often lands near the $800-$1,200 range for the unit plus modest install costs, while higher-end 36-inch systems with rapid boil and bridge features can push the total toward $2,000-$2,350 in busy markets.
Assumptions: standard 30″ to 36″ cooktop, single-wall cabinet access, no major plumbing changes, standard granite countertop with a clean cutout.
Major Cost Components in an Under-Granite Induction Install
The quote breaks down into four to six core parts. Understanding each helps compare bids accurately and avoid hidden fees. Expect costs to separate into unit price, cutout work, electrical upgrades, and finishing touches.
| Cost Component | Typical Range | Per-Unit Notes | Regional Variance | When It Matters |
|---|---|---|---|---|
| Induction cooktop unit | $400-$1,500 | Per model and power level | Higher in coastal cities | Primary price driver |
| Granite cutout and finish | $150-$600 | Labor + trimming | More for thicker granite | Needs precise fit |
| Electrical work | $150-$1,000 | Wiring, breaker, outlet | Urban areas higher | Crucial for safe operation |
| Delivery and handling | $0-$75 | Transport to site | Local markets vary | Smaller factor overall |
| Permits/inspections | $0-$200 | Local code requirements | Higher in strict jurisdictions | Check local rules |
| Disposal and removal | $0-$150 | Old unit and packaging | Depends on accessibility | Often negligible |
Variables That Most Change an Under-Granite Induction Quote
Power needs and site conditions drive the final price. A 36-inch induction with 4.0–5.0 kW power typically requires a dedicated circuit and can raise electrical costs by 20–40% compared with a basic 2.5–3.0 kW unit. If the granite is more than 2 cm thick or uses a hard-to-cut pattern, cutout labor climbs accordingly.
Assumptions: standard single-gang outlet, existing 120/240V supply, no island islanding or special ventilations.
Regional Price Differences You Might Expect Across the U.S.
Coastal markets and large metro areas often see higher labor rates, sometimes adding 10–25% to the base price. In contrast, rural or smaller markets may fall toward the lower end of the ranges. A midwestern kitchen typically sits in the average band, whereas the West Coast may add a premium for skilled granite work and quick scheduling.
Assumptions: regional labor variance applied to labor components; granite cutout complexity remains constant.
Labor Time and Crew Size for a Typical Under-Granite Install
A standard install with one technician and a helper usually takes 2–5 hours, depending on cutout complexity and electrical upgrades. High-end installations requiring precise edge finishing or custom trim may extend to 6–8 hours. For planning, budget a half-day to a full day on site.
Formula: labor_hours × hourly_rate; typical hourly rate $60-$100 depending on region.
Delivery, Prep Work, and Optional Upgrades
Delivery is often included or a small flat fee, but some shops charge for rush scheduling or special handling. Prep work such as removing old trim, sealing gaps, or adding a low-profile trim kit can add $50–$250. Optional upgrades include a touch-boost panel, integrated trim, or a warranty extension.
Assumptions: standard delivery within 20 miles; no island installation.
What to Expect in a Real-World Quote for Induction Under Granite
In a typical quote, you will see a line for the unit, a line for cutout and trim, a line for electrical, and a line for disposal. A well-structured estimate shows the unit price, labor hours, and any permit charges, so you can compare apples to apples across installers.
Assumptions: single-family kitchen, standard cabinet depth, 120/240V supply.
Ways to Reduce the Price Without Sacrificing Safety or Performance
Limit scope by choosing a 30-inch model, reuse existing wiring if compatible, and keep granite cutouts simple. Scheduling installations during off-peak days can also reduce labor rates. If the old cooktop is still functional, consider a direct replacement rather than a full remodel to avoid extra trim work.
Assumptions: standard installation with no island relocation.
Practical Example Quotes for Context
- Quote A: 30″ induction, $550 unit, $250 cutout, $200 electrical, $0 disposal — Total $1,000.
- Quote B: 36″ induction, $900 unit, $350 cutout, $450 electrical, $75 delivery — Total $1,775.
- Quote C: Premium 30″ with bridge element, $1,200 unit, $320 cutout, $600 electrical, $75 disposal — Total $2,195.