An Infinity 2000 garage door opener may be a discontinued or older model, so the price depends on whether the unit can be repaired or needs replacement. A typical repair runs $100-$350, while installing a comparable new opener usually costs $300-$900, with door size, opener type, labor, and parts availability affecting the quote.
Because model names can be incomplete or shared across product lines, buyers should check the opener’s label before ordering parts or a replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Common repair | $100 | $225 | $350 | Diagnosis and a standard repair, excluding major door damage |
| Replacement opener, installed | $300 | $550 | $900 | Residential unit, standard installation, typical single garage door |
| Opener unit only | $150 | $275 | $500 | Retail price varies by drive type and included accessories |
| Remote or receiver work | $35 | $100 | $225 | Compatibility and discontinued electronics can raise the price |
What a repair or replacement usually costs
Most owners should budget $100-$350 for a repair or $300-$900 for a new opener installed. The lower replacement range generally covers a basic chain-drive opener on a standard residential door with existing wiring and sound mounting. A quieter belt-drive unit, backup battery, keypad, or new wiring can push the project toward the high end.
For a new unit alone, common prices run about $150-$500. Professional installation often adds $150-$400, depending on local labor rates and how much existing hardware can be reused. These estimates do not include replacing a damaged garage door, track, or torsion spring.
Assumptions: One residential opener, normal ceiling access, standard U.S. labor rates, and no major door repairs.
How motor, labor, and accessories shape the quote
An opener quote may include the motor head, rail, controls, installation, and disposal. Ask whether the estimate covers programming existing remotes, removing the old unit, and testing the safety sensors.
| Quote item | Typical price | What changes the charge | Common unit rate |
|---|---|---|---|
| Opener and rail | $150-$500 | Drive type, lifting capacity, and included controls | $150-$500 per opener |
| Installation labor | $150-$400 | Ceiling height, wiring, and mounting condition | $75-$125 per hour |
| Remote, keypad, or receiver | $25-$150 | Brand compatibility and electronics availability | $25-$100 per accessory |
| Removal and disposal | $25-$75 | Contractor policy and old equipment condition | $25-$75 per unit |
| Electrical or mounting changes | $50-$250 | New outlet, reinforcement, or sensor wiring | $50-$125 per hour |
For example, 2-3 hours of installation at $75-$125 per hour equals roughly $150-$375 in labor.
Why an Infinity 2000 repair can cost more than expected
Parts availability is a key variable for an older or discontinued opener. If the control board, receiver, or motor assembly is no longer stocked, a technician may recommend replacement rather than spend time sourcing a used part. A basic diagnosis or service visit commonly costs $75-$150, sometimes credited toward approved repairs.
Door size and balance also affect the recommendation. A standard single door around 8-9 feet wide usually needs less capacity than a wide or heavy double door. Doors over about 16 feet wide, insulated wood doors, or doors that bind may require a higher-capacity opener or door repairs before a new motor is installed.
Do not treat an opener as a fix for a heavy or poorly balanced door. A technician should test the door manually; spring or track repairs can add $150-$500 or more, depending on the parts and work involved.
Chain drive, belt drive, and smart opener price differences
A chain-drive replacement is usually the least expensive choice, commonly $300-$650 installed. Belt-drive models often cost $450-$900 installed and reduce operating noise, which can matter when a garage is beneath a bedroom. Smart controls or battery backup may add about $50-$200, depending on the model and whether the features are included.
These ranges are for comparable residential equipment, not proof that a particular Infinity 2000 part will fit. Verify the manufacturer, model number, horsepower or lifting rating, rail length, and safety sensor setup before purchasing. A similarly named product is not necessarily compatible.
Three realistic quotes for common garage setups
Scope and site conditions explain why installed prices vary more than the opener’s shelf price. The examples below assume no door or spring repair is needed.
| Job | Equipment | Labor and extras | Estimated total |
|---|---|---|---|
| Basic single door | Chain drive, $175-$275 | 2 hours, $150-$250; removal, $25-$50 | $350-$575 |
| Quiet double-door setup | Belt drive, $300-$500 | 2-3 hours, $150-$375; programming, $25-$75 | $475-$950 |
| Older unit repair | Receiver or control part, $40-$150 | Diagnosis and 1-2 hours, $150-$400 | $190-$550 |
When remote and receiver compatibility changes the price
An older opener may use a remote frequency or coding system that is difficult to match with current accessories. A compatible remote might cost $25-$75, while replacing a receiver or adding a universal receiver can bring parts and labor to $75-$225. Confirm compatibility using the opener’s label and the receiver or logic-board information, not just the housing style.
If the remote is the only problem, test the wall control and opener first. A dead remote battery or lost programming can be a low-cost fix; a failed receiver, damaged wiring, or obsolete electronics can make full replacement more practical.
How to lower the replacement bill without sacrificing fit
Keep the quote focused on the opener if the door, springs, tracks, and wiring are in good condition. Compare at least two written estimates and check whether each includes the rail, safety sensors, remote, haul-away, and labor warranty. A low equipment-only price is not comparable to a fully installed quote.
Choose a standard chain drive when noise is not a concern, and skip smart features or battery backup unless they solve a specific need. Before paying for an uncommon Infinity 2000 part, ask the technician to compare its installed repair cost with a current replacement and explain any warranty difference. For a discontinued unit, the least expensive reliable option may be replacement rather than repeated parts searches.