Homeowners typically pay a combination of material, labor, and finishing costs to hang an interior door. Main drivers include door type, size, frame condition, and whether the door is pre hung or requires resizing and trimming. This guide presents cost ranges in USD with practical pricing to help budget decisions and compare options.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door Type | $60 | $150 | $350 | Hollow core vs solid core; prefinished options |
| Labor (install) | $120 | $240 | $520 | Includes hinge alignment and trimming |
| Hardware | $20 | $60 | $180 | Hinges, latch, strike plate |
| Frame/Jamb Work | $0 | $85 | $250 | New openings or resizing |
| Finishing | $0 | $40 | $120 | Painting or staining |
| Permits/Delivery | $0 | $20 | $60 | Typically minimal for interior work |
Overview Of Costs
Assumptions: region, door type, and crew availability influence totals. The total project range generally spans from the low cost of a simple hollow core door with basic hardware to a higher end setup with a solid core door, resizing, and upgraded hardware. A typical interior door hangs within $180 to $900 for all-in pricing, with per-unit labor around $120 to $260 for a standard 6 ft door. Prices vary by door type, frame work, and finishing needs.
Cost Breakdown
Basic component costs are door plus hardware. A hollow core pre hung door without labor is commonly $60–$150, while solid core doors run $120–$350. Labor for hanging a door generally ranges from $120 to $260, depending on trim work and alignment needs. Finishing adds $0–$120 if painting or staining is included.
| Materials | Labor | Equipment | Permits | Delivery/Disposal | Warranty | Overhead | Taxes |
|---|---|---|---|---|---|---|---|
| $60–$350 | $120–$260 | $0–$40 | $0–$60 | $0–$20 | $0–$50 | $20–$80 | $0–$40 |
What Drives Price
Door type and size dominate cost. Hollow core doors are cheaper than solid core or fire rated options, and pre hung units reduce on site work but may cost more upfront. A 6 ft slab door with standard hinge prep costs less than a 6 ft 8 in tall door with specialty hardware.
Frame and trim work adds significantly when resizing jambs to fit an existing opening or when square and level adjustments are needed. If the rough opening is irregular or the wall requires rerouting, expect higher labor hours and material use.
Finish and hardware quality impacts final price. Painted finishes, stains, and premium hardware (soft close hinges, latch sets, and strike plates) push costs upward. Assumptions: region, specs, labor hours.
Ways To Save
Choose factory pre hung doors to reduce on site framing and alignment tasks.
Match existing opening by selecting standard sizes to minimize jamb resizing.
Bulk or combo purchases for multiple doors can lower per unit freight and hardware costs.
Regional Price Differences
Prices show modest regional variation. In the urban Northeast, expect a +5 to 12 percent delta versus the national average due to higher labor rates. The rural Midwest may see a -5 to -12 percent delta, reflecting lower labor costs but similar material pricing. Coastal markets often align with urban ranges, while the South remains near the national average but can swing for higher demand during renovations.
Labor & Installation Time
Typical installation spans 2 to 4 hours for a standard door with basic prep. Complex jobs with resizing or non standard frames can run 4 to 6 hours. Labor costs correlate with crew size and trim complexity.
Additional & Hidden Costs
Hidden charges may include extra trim removal, shimming, or doorstop installation. If a door requires relocating or adjusting wiring or plumbing in the frame area, budget increases accordingly. Assumptions: region, specs, labor hours.
Real World Pricing Examples
Basic A hollow core door with standard hinges and a strike plate, no resizing. Labor about 2 hours; total $150–$230.
Mid Range Solid core door, standard hardware, minor jamb trimming. Labor 3–4 hours; total $320–$520.
Premium Fire rated solid core door, premium hardware, significant frame work or resizing. Labor 4–6 hours; total $520–$900.