An iRobot Roomba 880 typically costs about $75-$200 used, while tested or refurbished units commonly run $150-$300. Price depends on condition, battery health, included accessories, seller warranty, and whether the vacuum is sold as a working unit or for parts; new old stock is uncommon and may carry a much higher asking price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Roomba 880 | $75 | $135 | $200 | Working unit, condition and accessories vary |
| Tested or refurbished unit | $150 | $220 | $300 | Price may include a short seller warranty |
| New old stock | $300 | $425 | $600+ | Rare; verify packaging and return terms |
| Replacement battery | $25 | $45 | $75 | Aftermarket and branded options differ |
| Typical repair | $30 | $80 | $180 | Parts and technician labor determine total |
What a working Roomba 880 usually costs
For a complete, working Roomba 880, budgeting $100-$200 is a reasonable starting point. The low end usually means a private-party sale with visible wear, limited accessories, or an unverified battery. Units near the average price are more likely to include a charging dock and power supply, but buyers should still confirm that the vacuum charges and completes a cleaning cycle.
Refurbished listings often fall around $150-$300. That premium may pay for testing, cleaning, a replacement battery, or a limited return period, but “refurbished” is not a uniform standard. The seller should identify which parts were replaced and explain the warranty, if any. A high price alone does not establish that the unit was professionally serviced.
Prices assume a residential unit sold in the United States, with ordinary cosmetic wear and no major defect. The Roomba 880 is a discontinued model, so current prices reflect used-market supply rather than a stable retail list price. Assumptions: U.S. private-party or refurbisher listings, standard accessories, and a unit advertised as functional.
How battery, brushes, and dock change the quote
The machine’s condition and included hardware can shift the total by $25-$100 or more. A missing charging dock or power adapter can make a low listing less attractive, while worn brushes and filters are relatively inexpensive to replace. Battery performance is more consequential because a tired battery can shorten cleaning runs or prevent reliable operation.
| Quote item | Typical price | What the range covers | Buyer check |
|---|---|---|---|
| Battery | $25-$75 | Aftermarket through higher-priced replacement options | Confirm compatibility and seller return policy |
| Brush set | $12-$35 | Extractors or replacement brush components | Check wear and whether both parts are included |
| Filters | $8-$20 | Replacement filters, often sold in multipacks | Check fit for the 800-series model |
| Charging dock and adapter | $25-$70 | Used or replacement charging hardware | Ask for a photo of the exact included pieces |
| Virtual Wall accessory | $15-$45 | Used or replacement boundary device | Verify operation and battery inclusion |
| Delivery or shipping | $10-$35 | Domestic shipment, depending on seller and distance | Check whether shipping is already included |
Parts prices vary by source, and third-party components may not match original equipment quality. If a listing lacks the dock, adapter, or Virtual Wall devices, compare its delivered total with a complete unit rather than treating the advertised price as the whole expense.
Which 880 condition details move the price most
Battery runtime, cleaning performance, and proof of testing matter more than minor scuffs. Ask how long the vacuum runs away from its dock and whether it returns to charge. A seller who can show a completed cycle provides more useful evidence than a listing that simply says “powers on.”
Battery age is a major uncertainty: a battery that has sat unused for years may perform poorly even if the robot looks clean. A likely battery replacement adds roughly $25-$75 for the part, plus any service charge. Check for error lights, charging interruptions, unusual noises, and wheel or brush problems before paying a premium.
Completeness also affects value. A unit with the dock, adapter, and working Virtual Wall accessories can justify a higher price than a bare robot, but only if those items are needed. Cosmetic wear generally matters less than missing functional parts. A seller’s return window can be worth paying extra for, especially when the battery has not been independently tested.
Model age deserves attention as well. The 880 is an older robot with a more basic feature set than current mapping models, and replacement parts may be sold by multiple third-party suppliers. Buyers should price the unit as an older vacuum, not assume that an original retail price or premium listing reflects its present-day utility.
How much labor costs when an 880 needs repair
Minor owner-installed maintenance can cost under $50, while professional repair can push the total above $150. A shop may charge a diagnostic or minimum service fee of about $30-$75 before parts. Repair labor commonly falls around $60-$125 per hour, though many repairers quote a flat price for a specific fault.
For example, a 0.5-1.0 hour inspection at $60-$125 per hour represents $30-$125 in labor, before replacement parts or shipping. A battery swap is often straightforward for a mechanically comfortable owner, but wheel, charging, or electronic faults may require troubleshooting. Ask whether the diagnostic fee is credited toward the repair and whether the technician tests the robot after service.
Repair economics depend on the purchase price. If a $100 robot needs a $75 battery and a $100 repair, the resulting $275 expense may exceed the price of another tested unit. Obtain an estimate before authorizing work, especially for control-board, charging-system, or multiple-part failures.
How refurbished, used, and new old stock compare
A tested refurbisher unit costs more upfront but can reduce the risk of an immediate failure. Private-party listings around $75-$200 can be the cheapest route, but generally offer limited recourse. Refurbished listings around $150-$300 may include cleaning, testing, and a short warranty; buyers should verify those services in writing.
New old stock can be advertised for $300-$600 or more because unopened examples are scarce, not because the model has current-generation performance. Packaging can be old, and a battery stored for years may still need replacement. Ask the seller to disclose whether the battery is original and whether the return policy covers reduced runtime.
Compare the final delivered cost, accessory bundle, tested condition, and return terms. A $120 unit with no dock and a weak battery may cost more to make usable than a $190 tested bundle. Conversely, paying a collector-style premium for sealed packaging may not make sense for ordinary cleaning use.
Three realistic Roomba 880 buying budgets
Comparing complete totals makes the differences between listing prices clearer. These examples use plausible U.S. market prices, not guaranteed offers; shipping, local availability, and condition can change the final amount.
| Scenario | Robot and parts | Labor or shipping | Estimated total |
|---|---|---|---|
| Local used unit, tested briefly | $110 robot, $20 filters | $0 pickup | $130 |
| Used unit needing battery | $90 robot, $50 battery, $12 brush set | $18 shipping | $170 |
| Refurbished complete package | $220 robot and accessories | $15 shipping | $235 |
The first example assumes a working battery and dock, but little protection if a fault appears later. The second assumes the owner installs the battery and brushes; adding a shop visit could raise the total by $30-$125 or more. The third assumes testing and a return period, but buyers should confirm exactly what the refurbished price covers.
What to inspect before paying for a used 880
A short hands-on test can reveal problems that photos and a low asking price cannot. Confirm that the robot powers on, charges, starts a cleaning cycle, moves without binding, and responds to its controls. If possible, let it run long enough to check whether it stops unexpectedly or returns to the dock.
Ask for the included accessories in writing: charging dock, power adapter, Virtual Wall devices, filter, and brushes. Request a close-up of the wheels, brush area, charging contacts, and battery compartment. A dusty bin is ordinary used condition; corrosion, damaged contacts, persistent error codes, or a burning smell are reasons to pause.
For shipped purchases, review the return period and who pays return postage. A low-cost sale marked “as-is” may be reasonable for parts, but it should not be priced like a verified working vacuum. If the seller cannot demonstrate operation, reserve enough in the budget for a battery or repair—or compare the listing with a tested alternative.
How to keep the Roomba 880 purchase under budget
Set a ceiling based on the delivered, ready-to-clean cost rather than the sticker price. Decide whether the Virtual Wall accessories and a seller warranty are actually needed, then compare listings with the same essentials. Avoid paying extra for a large accessory bundle if replacement consumables are worn or the battery remains untested.
Ask sellers to demonstrate charging and a cleaning run before negotiating. For private sales, a local pickup can avoid shipping costs and make inspection easier. If the only known problem is a worn filter or brush, those parts are usually a modest expense; if runtime, charging, and movement are all uncertain, a discount may not cover the repair risk.
Compare at least three listings and calculate the added cost of a battery, missing dock, shipping, and any diagnostic fee. A practical target for a complete, tested used 880 is often below $200, while a higher refurbished price should come with specific testing and return terms. Budget check: listing price + required parts + shipping or labor = ready-to-use cost.