An Irrigreen sprinkler system typically costs about $1,500-$4,500 installed, with many homeowners paying around $2,800 for a standard residential yard. The price depends on lawn size and shape, the number of digital sprinkler heads, existing irrigation infrastructure, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Equipment package | $900 | $1,800 | $3,200 | Controller and roughly 2-6 heads, depending on package and coverage |
| Professional installation | $600 | $1,000 | $1,800 | Labor, setup, and ordinary connections |
| Complete installed system | $1,500 | $2,800 | $4,500 | Typical residential project; major trenching or repairs can cost more |
| Coverage price | $0.30 | $0.70 | $1.50 | Approximate installed cost per square foot; layout and yard size affect the rate |
What a residential Irrigreen system costs to install
Irrigreen uses digitally controlled sprinkler heads that adjust spray patterns, rather than a conventional layout of many fixed spray heads. A small, uncomplicated lawn may need a two- or three-head package and cost about $1,500-$2,300 installed. A typical yard with several watering zones often falls around $2,300-$3,400; large or irregular properties can reach $4,500 or more.
Budget roughly $2,800 for a standard installation with a controller, several heads, accessible water supply, and no substantial landscape restoration. Product packages and dealer pricing change, so equipment prices below are planning ranges rather than a guaranteed current retail quote.
Assumptions: U.S. residential lawn, standard equipment, accessible water and power, ordinary soil, and no major plumbing or electrical work.
How heads, controller, and labor shape the quote
A written estimate should separate equipment from installation and identify any site work. The following ranges reflect common planning allowances; actual packages may combine parts or include setup in the product price.
| Quote item | Typical range | Unit basis | What changes it |
|---|---|---|---|
| Digital sprinkler heads | $250-$450 | Per head | Package, model, and included components |
| Controller and controls | $250-$600 | Per system | Included hardware and connectivity |
| Pipe, valves, fittings | $150-$700 | Per project | Reuse of existing lines and required connections |
| Installation labor | $500-$1,500 | Per project | Head count, trenching, setup, and testing |
| Trenching and restoration | $200-$1,000 | Per project | Soil, hardscape crossings, sod, and access |
Labor and site preparation can make a modest equipment package a much larger project. Labor estimates may use a flat project fee or a rate of about $75-$125 per hour.
Lawn area, water pressure, and layout change head count
Head count is not determined by square footage alone. Irrigreen’s digital coverage can reduce the number of heads compared with some conventional designs, but slope, narrow strips, planting beds, and obstructions can require additional units or separate watering areas. Ask the installer to show the proposed coverage map and explain any overlap.
-
A straightforward lawn under 5,000 square feet may fit a smaller package, often totaling $1,500-$2,500 installed.
-
A 5,000-10,000-square-foot yard may require additional heads or zones, commonly bringing the total to $2,300-$3,800.
-
Water flow below roughly 8-10 gallons per minute, long pipe runs over 100 feet, or substantial elevation changes may require design changes or plumbing work.
Confirm usable water flow and pressure before comparing head counts. A larger property can still need a custom layout, and the installer’s coverage plan matters more than a simple head-per-acre estimate.
What a 6,000-square-foot lawn quote can include
For a practical comparison, consider a 6,000-square-foot lawn with accessible water, ordinary soil, and no existing system to reuse. A basic quote with three heads, controller, and uncomplicated installation might total $2,300-$2,900. A four-head plan with moderate trenching could reach $3,000-$3,800. A complex yard requiring extra line work and landscape repair may cost $4,000-$5,000.
Compare each quote against the same coverage area and included work. Request line items for hardware, labor, trenching, startup, and restoration; otherwise a lower headline price may exclude necessary work.
Installation time and hourly labor depend on the yard
A straightforward retrofit may take one installer or a small crew about 6-10 hours, including setup and system testing. New piping, difficult access, or several hardscape crossings can extend work to 1-2 days. At $75-$125 per labor hour, a two-person crew working a full day can account for $1,200-$2,000 before materials, although many contractors quote a fixed installation charge.
Ask whether commissioning and app configuration are included in labor. A quote should also state who handles controller connection, coverage adjustments, and a follow-up check if a watering pattern needs correction.
Regional sprinkler labor varies across the United States
Installation prices in lower-cost rural markets may run 10%-20% below a national planning estimate when access is easy and contractors are available. Major metro areas and high-cost coastal markets can be 15%-30% higher, especially where labor, permits, or restoration are expensive. Rocky soil, dense clay, and drought-related scheduling demand can raise local bids regardless of equipment price.
Use local installed quotes, not online equipment prices, to set the final budget. Request at least two estimates based on the same lawn plan, and check whether sales tax, delivery, and any local inspection charge are included.
When extra trenching or removal adds to the price
Replacing an older controller or reusing sound pipes may reduce the work, but incompatible valves, leaks, or poorly placed lines can erase those savings. Removing an old system or repairing damaged pipe can add $150-$800. Trenching through a paved path, rebuilding a valve connection, or restoring sod may add $300-$1,500 depending on length and surface.
Have the installer identify exclusions before work begins. Common omissions include electrical outlet work, backflow-device changes, winterization, damaged-line repairs, and lawn repair after trenching. Permit requirements vary by locality and by whether the project changes plumbing or backflow equipment.
Lower the Irrigreen bill through scope and quote choices
Keep the estimate focused on lawn areas that need automatic watering; beds or side strips may be cheaper to water with separate drip lines or a simpler zone. Reuse a functional water connection and existing pipe only after pressure and leak checks. Avoid adding heads solely for extra coverage until the installer shows why the planned pattern falls short.
Compare total installed scope rather than the number of heads alone. Schedule outside peak spring demand when local contractors offer more availability, prepare access to the water connection, and ask whether the quote includes startup and seasonal adjustments. Do not omit required backflow protection or code work to lower the initial bid.