A Jonsered chainsaw price list for U.S. buyers typically ranges from about $100 for a worn, small used saw to $1,000 or more for a clean professional model or new-old-stock unit. Model, working condition, bar length, included accessories, and local availability drive the quote; Jonsered saws are discontinued, so most are sold used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Small homeowner saw, used | $100 | $225 | $400 | Typically 35-45 cc; running condition |
| Mid-size saw, used | $175 | $375 | $650 | About 45-60 cc; price depends on service history |
| Professional saw, used | $300 | $600 | $1,000 | Often 60 cc or larger; clean examples cost more |
| New-old-stock or dealer inventory | $450 | $800 | $1,300+ | Availability and warranty vary |
Prices are planning ranges, not guaranteed current listings. Condition, location, and model can move an individual asking price substantially.
What Jonsered Chainsaws Usually Cost by Size
Most buyers should budget $200-$650 for a usable, mid-size used Jonsered, with professional models often priced higher. Smaller homeowner saws, including older 40 cc-class models, commonly list around $100-$350 when running. Mid-size options such as a CS 2250 or CS 2255 may fall near $200-$600 depending on condition and included bar. Larger professional saws can exceed $700 when maintained and ready to work.
These estimates assume a complete saw with a functioning engine, ordinary wear, and no major repair needs. A non-running unit may sell for $50-$200 as a repair project or parts donor. New-old-stock pricing is less predictable because remaining inventory is scarce and may not include a useful warranty or current dealer support.
How Bar, Chain, and Repair Costs Shape the Asking Price
When comparing listings, separate the saw’s value from replacement parts and shop work. A worn chain or bar can add immediate expense, while a seller’s recent service invoice may support a higher asking price. Typical repair charges vary by shop and diagnosis.
| Quote component | Typical price | What changes it | Buyer check |
|---|---|---|---|
| Replacement chain | $20-$45 each | Pitch, gauge, and bar length | Match specifications on the saw |
| Replacement bar | $35-$90 | Length and brand | Check rail wear and mount fit |
| Carburetor service | $75-$180 | Cleaning versus replacement | Ask for a cold-start test |
| Shop labor | $75-$125 per hour | Local rate and repair complexity | Get a written diagnosis |
| Pickup or shipping | $25-$150 | Distance, packing, and carrier | Confirm fuel and shipping rules |
Example: 1.5 hours of diagnosis and repair at $90-$120 per hour adds $135-$180, before parts.
Which Model and Condition Details Change the Price Most
Engine size and mechanical condition matter more than cosmetic appearance. A 35-45 cc homeowner saw generally costs less than a 60-70 cc professional unit because it is intended for lighter work and has a smaller power class. A longer 20-24-inch bar may add value if it is in good condition, but it can also signal heavier use; verify that the saw is designed for that bar length.
Starting behavior is a major price divider. A saw that starts cold, idles steadily, oils the chain, and accelerates cleanly is worth more than one that only runs after warming up. Expect a discount of roughly $75-$250 for a suspected fuel, ignition, or compression problem, but a major engine rebuild can cost more than the saw is worth.
Cosmetic wear usually matters less unless it indicates damage. Cracked handles, a loose clutch cover, damaged crankcase, or missing safety parts can turn a bargain into an expensive repair. Ask for the model and serial number, and check that the seller can demonstrate the chain brake and throttle lock.
Why Jonsered Prices Differ Between Rural and Metro Markets
Used saws in rural areas with active logging, firewood, and tree-work markets may cost about 5%-15% more than comparable listings in less forestry-oriented areas. Large metro markets can show higher asking prices, sometimes 10%-20% above a broad regional baseline, but there may also be more competing listings and repair shops.
Shipping can erase a low online price: a $250 saw may require another $40-$150 for packing and delivery, if the seller and carrier can legally accept it. Local pickup lets a buyer test starting and inspect the bar, sprocket, and air filter before paying. Compare the delivered, ready-to-run price rather than the listing price alone.
What to Budget for Parts, Diagnostics, and Missing Gear
Older Jonsered models may need parts sourced through independent repair shops, aftermarket suppliers, or used-part sellers. Availability varies by model; confirm fit before buying parts. A diagnostic fee may be $30-$100, sometimes credited toward authorized repairs, while a tune-up can run roughly $75-$200 plus replacement parts.
Include safety equipment in the purchase budget if it is not already available. Chaps may cost $70-$200, hearing protection $15-$50, and a helmet with face protection $40-$120. These are separate from the chainsaw price and do not make an unsafe or defective saw a better buy.
When a Husqvarna or Stihl Saw Is the Better Price Comparison
Jonsered and Husqvarna have historical ties, but parts interchange should never be assumed from appearance alone. Compare the exact model, component numbers, and local parts availability. A used Husqvarna or Stihl saw in similar displacement and condition may cost $250-$700, while a current entry-level gas saw from a major brand can be roughly $200-$400.
A less expensive Jonsered makes sense only if it starts reliably and common wear parts are available at a reasonable price. For a saw needing engine work, a current model with dealer support may offer better value even when its purchase price is higher. Use total repair and parts cost, not brand name, to compare alternatives.
How to Lower the Price Without Buying a Project Saw
Ask the seller for a cold-start video, recent maintenance details, and clear photos of the model plate, bar rails, and sprocket. Compare at least three local or shipped listings for the same model and similar condition. A missing bar cover or dull chain can support a modest negotiation, but a compression problem or safety defect calls for a repair estimate, not guesswork.
Choose a saw with the bar length needed for the work rather than paying extra for an oversized setup. Avoid buying a non-running unit unless a shop has confirmed the repair scope and parts availability. A discount of $100 is not worthwhile if diagnosis, parts, and labor add $300 or more.
Three Jonsered Buying Scenarios and Their Total Budgets
Condition and readiness explain why two similar-looking listings can differ by hundreds of dollars. The examples below are estimates for common used-market situations, excluding sales tax and protective equipment.
| Scenario | Saw price | Added expense | Estimated total |
|---|---|---|---|
| 40 cc homeowner saw, running, 16-inch bar | $175-$300 | $20-$45 chain | $195-$345 |
| 50-55 cc saw, inspection and tune-up needed | $275-$450 | $75-$200 service | $350-$650 |
| 65 cc professional saw, clean, 20-inch bar | $550-$850 | $35-$90 bar if worn | $585-$940 |
Totals assume the engine does not need rebuilding. Repair estimates, shipping, local taxes, and parts availability can change the final budget.