A used Jøtul F 3 wood stove typically costs $700-$2,000, while new-old-stock units, when available, may list for $2,500-$4,000. The installed price can reach $2,000-$7,500, depending on condition, chimney work, local labor, and whether the stove meets current installation and emissions rules.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Jøtul F 3 stove | $700 | $1,300 | $2,000 | Price varies with condition and included parts |
| New-old-stock stove | $2,500 | $3,200 | $4,000 | Availability and warranty coverage vary |
| Basic installation | $1,200 | $2,500 | $4,000 | Assumes a usable, code-compliant chimney |
| Installed project total | $2,000 | $4,200 | $7,500 | Stove, standard labor, and typical connection work |
What a Jøtul F 3 stove costs before installation
The Jøtul F 3 CB is a discontinued cast-iron wood stove, so buyers generally compare used listings or occasional dealer inventory rather than a consistent current retail price. A sound used unit commonly falls around $700-$2,000; a complete example with intact glass, firebricks, and hardware usually commands more than a stove needing repairs.
New-old-stock examples may be advertised for $2,500-$4,000, but a high asking price does not guarantee current manufacturer support, warranty coverage, or approval for installation. For budgeting, distinguish the stove’s purchase price from the installed project total.
Assumptions: U.S. pricing, one stove, ordinary access, and no major chimney reconstruction.
How stove, chimney, and labor charges shape the quote
Installation quotes vary with the existing hearth and venting. A site with a usable masonry chimney may need only connector pipe and routine labor; a new insulated chimney or substantial hearth work can add several thousand dollars.
| Quote component | Typical price | What changes the charge | Unit basis |
|---|---|---|---|
| Used stove and inspection | $700-$2,000 | Condition, parts, seller | Per stove |
| Connector pipe and fittings | $250-$800 | Pipe type, length, elbows | Per installation |
| Chimney liner or new vent | $900-$3,500 | Height, material, access | Per chimney |
| Hearth or wall protection | $200-$1,200 | Required clearances and finish | Per project |
| Installer labor | $500-$1,800 | Site complexity and crew time | Usually per job |
| Inspection or permit | $50-$500 | Local rules and inspection scope | Per jurisdiction |
Chimney condition is often the largest unknown after the stove itself. Ask for separate line items for venting, hearth changes, labor, disposal, and inspection so quotes can be compared on the same scope.
Which F 3 condition and chimney specs change the price?
Stove condition affects both purchase price and repair expense. Cracked cast iron, warped plates, damaged door seals, missing firebricks, or a broken glass panel can make a low-priced listing costly. Replacement parts may be available through specialty suppliers, but older-model availability and fit should be confirmed before purchase.
Chimney dimensions also matter. A flue run around 15-20 feet with straightforward access may fit a standard installation quote, while a taller run, multiple offsets, or a roof pitch above 8:12 can raise labor and equipment charges. A liner sized to the stove’s outlet and verified against the installation instructions may be needed.
Do not assume a used stove can be installed just because it fits the fireplace. Check the unit’s label, clearances, local code, and applicable emissions requirements with the installer or authority having jurisdiction.
Can an existing chimney keep installation near $1,200?
Sometimes. A basic installation may cost about $1,200-$2,000 when the chimney is sound and appropriately sized, the hearth meets clearance requirements, and the stove can connect without extensive alterations. That figure generally excludes the stove and unexpected repairs.
If inspection finds a missing liner, deteriorated masonry, inadequate floor protection, or a need to extend the chimney, the installation portion can rise to $3,000-$5,500 or more. A chimney sweep or installer may charge $100-$300 for an inspection, sometimes credited toward the work.
Request a written site assessment before treating a low labor estimate as the final price. Ask whether the quote includes the connector, liner, permits, roof access, and cleanup.
How regional labor rates affect a Jøtul F 3 install
Labor and chimney work tend to cost more in major metropolitan areas and high-cost coastal markets than in rural areas with several competing installers. As a rough comparison, urban quotes may run 15%-30% above a typical regional estimate; rural pricing may be 10%-20% lower when travel and contractor availability are favorable.
These differences are not guaranteed: limited availability of qualified installers, steep roofs, winter scheduling, or a long drive can erase a rural discount. Stove prices also depend on local supply, freight, and the condition of the particular used unit.
Compare at least two itemized local quotes, not just the stove’s advertised price. Confirm that each estimate covers the same chimney, hearth, permit, and inspection work.
Used F 3, new-old-stock, or another stove
A used F 3 can have the lowest purchase price, but repairs and uncertain parts can reduce the savings. New-old-stock inventory may cost more and still needs confirmation of warranty terms and local approval. A current stove model may have a higher upfront price but clearer parts support and installation documentation.
For comparison, a new freestanding wood stove from another manufacturer may cost roughly $1,500-$4,000 before installation, depending on size and features. A professional inspection of a used F 3 can help identify repairs before money changes hands.
Compare total installed cost and support, rather than treating the lowest used listing as the cheapest option.
Where to trim the Jøtul F 3 project budget
Get the chimney inspected before buying the stove, and verify the model’s outlet, clearances, and condition in advance. If existing floor protection and venting meet requirements, keeping them may avoid unnecessary replacement; if they do not, skipping corrections can create safety and code problems.
Ask whether the installer can bundle inspection and installation, and whether removal of an old appliance is included. Avoid paying extra for decorative upgrades that do not solve a clearance, protection, or performance need. Compare quotes with the same scope and schedule nonurgent work when local contractors have availability.
Control scope, confirm compliance, and price repairs before committing to a used stove.