A Jøtul GF 300 DV gas stove may cost about $2,500-$4,500 for the appliance when available, with a typical professionally installed total of $4,000-$7,500. Final pricing depends on whether the stove is new, used, or remaining dealer inventory, plus venting, gas-line work, local labor, and removal of an old unit.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stove only | $2,500 | $3,500 | $4,500 | New or dealer-stock unit; availability varies |
| Installed project | $4,000 | $5,700 | $7,500 | Standard direct-vent setup and routine access |
| Used stove | $800 | $1,700 | $2,800 | Condition, age, parts, and local supply affect price |
| Direct-vent materials | $300 | $650 | $1,200 | Typical vent parts; long or complex routes cost more |
What a Jøtul GF 300 DV stove typically costs
The GF 300 DV is a direct-vent gas stove from Jøtul’s Allagash line. Because it is an older model and availability can be limited, quoted prices are not a single current national list price. A dealer may quote new old stock, a remaining showroom model, or a comparable replacement instead. For a new, saleable unit, budget roughly $2,500-$4,500 before installation.
Installed totals commonly fall around $4,000-$7,500 for a standard project. That assumes one stove, a practical exterior-wall vent route, an accessible gas connection, and no major hearth reconstruction. A straightforward replacement can land near the lower end; a new gas line, extended vent, electrical changes, or custom finish work can push the total above $7,500.
Used listings may show a much lower purchase price, often $800-$2,800, but that is not equivalent to a tested, installed appliance. The buyer should account for inspection, missing trim or vent parts, service, and whether a qualified installer will accept the unit. Replacement parts and documentation should be confirmed before purchase.
Assumptions: U.S. pricing in dollars, standard residential installation, ordinary access, and no major structural or code repairs.
How stove, venting, and labor shape the quote
A full estimate should separate the appliance from the installation tasks. Direct-vent stoves need compatible vent components and a correctly prepared wall or chimney opening; they are not priced like a freestanding electric heater. Venting and labor together can add about $1,000-$2,500 to the appliance price.
| Quote component | Low | Typical | High | What changes the charge |
|---|---|---|---|---|
| Stove | $2,500 | $3,500 | $4,500 | New stock, finish, dealer availability |
| Direct-vent kit and pipe | $300 | $650 | $1,200 | Wall thickness, elbows, vertical rise |
| Installation labor | $700 | $1,200 | $2,000 | About 8-16 hours; crew and site conditions |
| Gas-line work | $150 | $450 | $1,200 | Connection nearby versus a new branch line |
| Removal and disposal | $100 | $300 | $600 | Old appliance, vent removal, hauling distance |
| Permit or inspection | $0 | $150 | $400 | Local requirements and inspection fees |
Labor may be quoted as a package or estimated by time. For comparison, a contractor’s service rate might be $75-$150 per hour, but a stove installation can include travel, setup, commissioning, and warranty responsibility beyond billable hours.
Which vent route, gas line, and stove condition change price?
Venting is a major variable. A short horizontal run through an exterior wall may require about $300-$700 in vent materials, while a longer route with multiple elbows or a vertical section can reach $800-$1,500 or more. The installer must follow the appliance manual’s clearances and permitted vent configuration; a route that looks shorter is not automatically acceptable.
Gas supply also changes the quote. If a correctly sized shutoff and gas line are already close to the stove, connection work may cost $150-$350. A new branch line routed 20-40 feet through finished walls or ceilings can add roughly $500-$1,500, depending on access, pipe type, and local labor. Gas pressure and connection details need professional verification.
For a used GF 300 DV, operating condition matters more than a low asking price. A service visit and inspection may cost $150-$400, while replacement of a control component, burner part, or gasket can add several hundred dollars. If the firebox, glass, valve, or venting is damaged or incomplete, repair costs can exceed the savings over a warrantied unit.
Scope changes can also include a new hearth pad, wall protection, or finish repair. These items are not always needed for a compliant installation, so the quote should identify the specific clearance or finish requirement rather than bundle in unspecified construction work. Ask for separate line items for vent length, gas piping, removal, and repairs.
Ways to keep a GF 300 DV installation within budget
Keeping the vent route short and accessible is one of the most effective ways to limit labor and materials. Before requesting bids, provide clear photos of the proposed location, exterior wall, gas shutoff, and any existing vent. This helps installers distinguish a simple replacement from a project needing exploratory work.
Compare the total installed quote, not just the stove price. A low appliance price may exclude the vent kit, gas connection, setup, permit, or commissioning. Ask whether the quote includes delivery, removal, taxes, startup testing, and the installer’s labor warranty. Use an itemized written estimate to compare equivalent scope.
Do not replace sound components without a technical reason, but do not reuse old venting unless the installer confirms it is compatible, in safe condition, and allowed by the appliance instructions. Reusing unsuitable pipe can create safety and inspection problems. For a used stove, request a model and serial number, parts list, service history, and a pre-purchase inspection.
Choose finishes and accessories based on the actual installation rather than appearance alone. Optional trim, decorative panels, remote controls, or a new hearth can add $100-$1,000 or more. Confirm which pieces are included with the stove and which are necessary for safe installation before approving upgrades.
How regional labor rates affect the installed price
Local labor and dealer availability can shift a project substantially. In lower-cost rural markets, routine installation may price about 10%-15% below the national middle range, although travel or limited installer availability can erase that difference. In high-cost metro areas, labor and permit charges may put the same scope 15%-30% above a typical quote.
Cold-weather states and areas with established hearth-product dealers may have more certified installers but also a busier fall and winter schedule. Remote locations can face delivery fees of $100-$400 or added trip charges. Local building rules also differ, so a permit that is not charged in one town may be required in another.
Use regional adjustments as a budgeting aid, not a fixed formula. A quote that is much lower than neighboring estimates may omit venting or commissioning; a higher quote may include a longer vent run, difficult access, or a stronger service commitment. Compare the same model, vent configuration, and included work across bids.
How long the stove installation takes and what labor covers
A direct replacement with an existing suitable gas connection and vent opening may take about 4-8 hours on site. A new installation with wall penetration, gas-line routing, and finish work can require 1-2 workdays, often totaling 8-16 labor hours. More time may be needed when the crew must open and repair finished walls or troubleshoot an old chimney opening.
The labor charge should cover positioning, connection, vent assembly, required clearances, leak and operational checks, and customer instructions. Some installers include a separate startup or diagnostic visit; others charge $100-$250 if commissioning is not included. Ask who is responsible for obtaining permits and arranging inspection before work begins.
Scheduling can affect price when a job is urgent or requested during peak heating season. Rush or after-hours service may carry a $150-$500 premium, while normal scheduled installation is usually less expensive. Delivery coordination matters too, because a stove left outdoors or moved through tight access may create additional handling charges.
What three realistic GF 300 DV quotes can include
A replacement at an existing fireplace location might include a $3,400 stove, $450 in vent components, 6 labor hours at an effective $125 per hour, and $250 for removal and testing. With modest delivery or permit fees, the total could be about $4,900-$5,500.
A new installation through an exterior wall might include a $3,600 stove, $750 in venting, 10 labor hours at $125 per hour, and $450 for a new gas branch. With a $200 permit and $200 delivery charge, the total would be near $6,450 before tax or optional finish work.
A difficult installation with an extended vent route and finished-wall repair could include a $4,200 stove, $1,200 in vent parts, 16 labor hours at $140 per hour, and $1,000 for gas-line and finish work. Removal, delivery, and inspection could bring the total to approximately $9,000-$10,000. These examples are planning scenarios, not guaranteed local bids.
When a used GF 300 DV beats a replacement stove
A used unit can reduce the purchase cost by $1,000-$3,000 compared with new inventory, but the project total may narrow that gap after inspection, parts, and installation. A buyer should confirm that the exact model can be installed with available compatible venting and that the installer will provide commissioning and service.
Compare the used stove with a current direct-vent gas model of similar heating capacity, not only with another GF 300 DV listing. A new comparable stove may cost roughly $3,000-$5,500 before installation, depending on features and finish. New equipment may include a manufacturer warranty and readily available parts; older stock may not.
Before paying for a used unit, check for cracked glass, corrosion, damaged burner parts, missing controls, and signs of improper venting. Obtain a written parts estimate for any known defect. If repair and installation together bring the used option within a few hundred dollars of a new model, warranty coverage and service access can make the new unit the lower-risk purchase.