Kashmir White granite typically costs $55-$100 per square foot installed, with many standard kitchen projects landing near $3,000-$5,500. Slab grade, countertop area, edge profile, cutouts, removal, and local labor rates have the greatest effect on the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed granite | $55/sq ft | $75/sq ft | $100+/sq ft | Fabrication and standard installation included |
| Stone material | $30/sq ft | $45/sq ft | $65+/sq ft | Varies by slab selection and supplier |
| 30-sq-ft kitchen | $1,650 | $2,250 | $3,000+ | Before optional removal or upgrades |
| Typical full project | $2,000 | $4,000 | $7,000+ | Depends on layout, sink cuts, and region |
What a Kashmir White granite countertop costs installed
For a standard kitchen, installed pricing commonly runs $55-$100 per square foot, or about $2,750-$5,000 for 50 square feet. Smaller jobs may cost more per square foot because fabricators often have minimum charges. A simple 25-square-foot vanity or kitchenette could total $1,500-$2,800, depending on cutouts and access.
Most standard layouts fall around $65-$85 per square foot installed. That estimate assumes a mid-grade slab, standard 1¼-inch thickness, a basic eased edge, one sink cutout, and ordinary installation access. White granite can have substantial variation in gray veining, burgundy flecks, and background tone, so slab selection may change the material quote.
Assumptions: U.S. pricing, standard residential fabrication, normal access, and no major cabinet or plumbing work.
How slab, fabrication, and installation charges add up
Quotes differ in what they bundle. The following ranges show common components for a standard project; material and fabrication may be combined on a fabricator’s estimate, so buyers should check for double-counting.
| Quote component | Typical range | How it is charged | What changes the price |
|---|---|---|---|
| Granite slab | $30-$65/sq ft | By slab or estimated area | Grade, appearance, supplier, usable yield |
| Fabrication | $15-$30/sq ft | By area or project | Edge work, seams, cutouts |
| Installation labor | $10-$25/sq ft | By area or crew day | Stairs, access, layout complexity |
| Sink and cooktop cuts | $150-$350 each | Per cutout | Cut type and finishing requirements |
| Removal and disposal | $5-$15/sq ft | By area | Old surface, backsplash, disposal distance |
Ask whether the quote includes measuring, delivery, sink cutouts, sealing, and disposal. Labor for a typical countertop installation is often priced into the project rather than billed by the hour. When separately listed, fabrication and installation labor can represent roughly $25-$55 per square foot combined.
Why slab grade and countertop layout change the quote
Slab grade is a major variable: a supplier’s standard selection may be near $30-$45 per square foot for the stone, while premium or carefully matched slabs can reach $50-$65 or more. The name Kashmir White does not guarantee a uniform pattern; reviewing the actual slab helps prevent mismatched expectations and can affect how much material must be purchased.
Area and layout also matter. A 25-square-foot job may have a higher unit price than a 50-square-foot kitchen because setup, delivery, and templating are fixed expenses. Two or more sink or cooktop openings, long seams, curved corners, or an island wider than 36 inches can add fabrication time or require additional material. Complex cuts and slab yield can raise the total even when the countertop area changes little.
Can a simpler edge or fewer cutouts lower the price
Yes. A standard eased edge is often included, while decorative ogee or waterfall work may add $10-$30 per linear foot or more. Reducing unnecessary cutouts and keeping the countertop layout simple can limit fabrication charges. A new sink may also require a different cutout, so confirm its dimensions before the slab is cut.
Existing countertop removal commonly adds $150-$600 for a small-to-average kitchen, with heavier stone or difficult access costing more. Backsplash removal and wall repair may be separate. Keeping removal, plumbing reconnection, and cabinet repair clearly itemized makes competing quotes easier to compare.
How Kashmir White granite pricing varies by U.S. region
Local labor, freight, and competition can shift installed prices. In many lower-cost Midwest and Southern markets, standard work may be about 5%-15% below a national midrange estimate. Major coastal cities and high-cost metros can run 10%-25% above it, particularly where delivery access, parking, or labor is difficult.
Stone availability also matters: a local fabricator with suitable slabs may quote less than a shop that must arrange special shipping. These percentages are planning estimates, not fixed regional tariffs. Compare at least two local written quotes using the same area, edge, cutouts, and removal scope.
What three kitchen layouts might cost
A 25-square-foot kitchenette with one sink cutout, a basic edge, and no removal could total about $1,650-$2,500, equivalent to roughly $66-$100 per square foot. A 40-square-foot kitchen with one sink cutout and standard access might run $2,600-$3,600, or $65-$90 per square foot.
A 60-square-foot kitchen with an island, two cutouts, and old countertop removal could reach $4,500-$6,800, depending on slab selection and disposal. These examples assume ordinary cabinet condition and no plumbing changes. The larger layout may have a lower unit price but a higher total bill.
When installation time or access adds labor expense
Templating often takes one to two hours, while setting a standard kitchen may require a crew of two or three for three to six hours. Fabrication usually happens off-site and may take one to three weeks after slab approval, depending on the shop’s schedule and material availability.
Stairs, narrow entrances, long carries, or limited parking can require extra crew time or handling equipment. Confirm that the installer has checked access before the final quote; a site visit can reveal conditions that a floor plan will not show. Unusual access is a potential charge, not a reason to assume every installation requires a crane.
Ways to keep the granite project within budget
Choose a slab in the supplier’s standard price range and compare the full slab, not just a small sample. A straightforward layout, standard edge, and grouped cutouts can reduce fabrication waste. Ask whether remnants are available for a small vanity or backsplash, but verify that the remnant matches the kitchen slab closely enough.
Get quotes that specify square footage, slab grade, edge profile, sink openings, delivery, removal, and taxes. Avoid paying for upgrades that do not solve a practical need, and do not compare a material-only price with a turnkey installation quote. Scope-matched estimates are the most dependable way to identify a genuinely lower price.