A used Kenmore Series 500 washer typically costs $150-$450, with a working unit averaging about $300; refurbished units often run $350-$650. Price depends on the model number, condition, local availability, delivery needs, and whether the washer is sold with a warranty.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used washer | $150 | $300 | $450 | Working, tested unit; local pickup often costs less |
| Refurbished washer | $350 | $500 | $650 | May include a short seller warranty |
| Delivery and hookup | $50 | $100 | $175 | More for stairs, long carries, or removal |
| Common repair | $120 | $250 | $450 | Parts and labor; diagnosis may be extra |
What buyers pay for a used Series 500 washer
Most Series 500 washers are older top-load models, so buyers are generally comparing used or refurbished inventory rather than current new stock. A basic working unit commonly lists for $150-$450, while a clean, tested machine with a return period or limited warranty may reach $350-$650. A washer with an unknown history should cost less because repair parts and labor can quickly exceed its purchase price.
There is no single Series 500 specification: the model number identifies the exact machine and features. Before paying, check the model tag, confirm that it fills, agitates or spins as designed, drains, and does not leak. Assumptions: standard U.S. top-load model, normal condition, no unusual delivery access. A practical target is about $250-$350 for a tested used washer without a long warranty.
How washer, delivery, and hookup charges add up
Seller quotes may cover only the appliance. Ask whether delivery, installation, hoses, haul-away, and sales tax are included; these charges can make a low advertised price less attractive. Local appliance sellers may offer a bundled price, while private sellers commonly require pickup and separate installation.
| Quote component | Low | Typical | High | What changes the charge |
|---|---|---|---|---|
| Washer purchase | $150 | $300 | $650 | Condition, testing, warranty |
| Delivery | $50 | $85 | $150 | Distance, stairs, access |
| Hookup or installation | $0 | $50 | $100 | Existing connections and labor |
| Hoses or drain parts | $15 | $35 | $75 | Part quality and replacement needs |
| Old washer removal | $0 | $35 | $75 | Retailer policy and local disposal |
Confirm the complete delivered-and-installed total rather than comparing sticker prices alone. A typical delivered purchase can land around $250-$500 before tax, depending on the washer price and service package.
Model number, age, and condition change the price
Series 500 is a product line, not one identical washer. Verify the full model number on the appliance tag and compare it with the seller’s listing; capacity, controls, and parts differ across versions. A unit that completes a full wash and spin cycle is worth more than one tested only for power. Visible rust, water damage, loud bearings, or a slow drain can justify a lower offer or a decision to walk away.
Age and parts availability also matter. If a machine needs a control board or transmission, the repair can approach or exceed the value of an inexpensive used replacement. Typical appliance repair labor runs about $85-$150 per hour, often with a $75-$130 diagnostic fee. Ask for a written repair estimate before buying a washer with a known fault.
Used, refurbished, or a newer replacement
A private-party washer at $150-$300 may be the cheapest option, but it usually comes with little or no protection. Refurbished inventory at $350-$650 costs more upfront and may include testing, delivery, or a short warranty. A comparable new top-load washer often costs roughly $600-$1,000 before delivery, though model features and sales shift that range; it is not necessarily a new Series 500.
Compare the total with the expected repair bill, not just the purchase amount. For an older washer needing a $300 repair, replacement with a tested used unit may be more economical. For a minor hose or lid-switch issue, repair may be reasonable if the rest of the machine works well. Warranty length and return terms can be worth more than a small discount on an untested washer.
Regional delivery prices and local inventory
Used appliance prices vary with supply and transport. In large metro areas, more listings can improve selection, but delivery, stairs, and parking restrictions may add $25-$100. Rural buyers may face fewer nearby Series 500 listings and a $50-$150 distance charge. As a broad budgeting estimate, dense urban prices can run 5%-15% above nearby suburban listings for delivered units, while limited rural supply may raise the delivered total by 10%-20%.
These are planning differences, not fixed regional rates. Get the seller’s delivery radius and access fees in writing, particularly for basement laundry rooms or upper floors. Local pickup can save $50-$150 when a suitable vehicle and safe loading help are available.
Repair labor and common add-on charges
Basic installation may take 30-60 minutes when water valves, drain, and electrical outlet are ready. A technician visit for diagnosis and repair can take 1-3 hours, with total bills commonly ranging from $120-$450 depending on the part and labor. A drain pump or lid switch may be less costly than a major control or drive-system repair; the exact model and fault determine parts pricing.
Plan for new braided fill hoses at about $15-$35, and check that the drain hose reaches the standpipe without kinks. Replacing shutoff valves or correcting an unsuitable drain setup can add $100-$300 or more. Ask whether diagnostic fees apply toward the repair and whether the quoted labor includes testing afterward.
Three realistic Series 500 purchase totals
| Buying scenario | Washer | Labor or delivery | Estimated total | Price detail |
|---|---|---|---|---|
| Local pickup, tested unit | $225 | $0 | $225 plus tax | About $225 per washer |
| Refurbished, delivered and hooked up | $475 | $125 | $600 plus tax | Delivery and installation included |
| Used washer, nearby delivery, hoses | $300 | $110 | $410 plus tax | $75 delivery, $35 hoses |
These examples assume a working machine and ordinary access. Compare each quote’s warranty, return window, and removal terms alongside its total.
Ways to lower the Series 500 purchase price
Search by the exact model number as well as “Kenmore Series 500,” since sellers may omit the series name or list the appliance by model. Ask for a video of a complete cycle, the age if known, and the reason for sale. A pickup discount can help, but only if transport and loading are safe; appliance delivery usually requires a suitable vehicle and assistance.
Keep the scope simple by reusing sound hoses and existing connections, but do not reuse cracked hoses or accept a washer that cannot be tested. Compare at least two local quotes with delivery, hookup, and haul-away itemized. Set a maximum all-in price before negotiating, especially when the seller offers no warranty.