A Kenmore Series 600 washer typically costs about $250-$600 used, with a common asking price near $400; tested or refurbished units can reach $700, while new old-stock machines are uncommon and may cost $700-$1,100. Model, condition, local supply, delivery, and whether the washer is sold with a matching dryer drive the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used washer, pickup | $250 | $400 | $600 | Working machine, condition and age vary |
| Tested or refurbished washer | $400 | $550 | $700 | May include limited seller warranty |
| New old-stock washer | $700 | $900 | $1,100 | Availability is limited; verify exact model |
| Delivery and hookup | $75 | $150 | $300 | More if stairs, haul-away, or new hoses are needed |
What a Kenmore Series 600 washer costs used
Most buyers encounter Series 600 washers through local used-appliance listings, resale shops, or appliance dealers rather than current standard retail inventory. A basic working unit commonly lists for $250-$500, and a clean machine with a recent service check may sell for $400-$600. Prices above that range need a clear reason, such as a warranty, documented repair, or included delivery.
For a typical household purchase, budget $350-$550 for the washer before delivery. The Series 600 name covers multiple models and configurations, so capacity, cycle features, and controls differ. Check the model number on the machine’s identification label rather than assuming every Series 600 has the same specifications.
The lower end usually means an as-is sale, limited testing, cosmetic wear, or buyer-arranged pickup. The average assumes a functioning top-load washer with ordinary wear and no known major fault. A higher price may reflect dealer testing, cleaning, a short warranty, or a better-condition example. Assumptions: U.S. local-market used pricing, standard top-load configuration, and no major repair needed.
How parts, testing, and delivery shape the quote
Used-appliance sellers may combine inspection, repair, delivery, and hookup into one price. Separating the charges helps buyers compare a private listing with a refurbished machine from a dealer. The ranges below are typical planning estimates, not a required fee schedule.
| Quote item | Low | Average | High | What it covers |
|---|---|---|---|---|
| Washer purchase | $250 | $400 | $700 | Used through tested or refurbished unit |
| Inspection or basic testing | $0 | $40 | $100 | Seller testing may be included in the price |
| Local delivery | $50 | $100 | $175 | Ground-floor drop-off in many markets |
| Hookup and leveling | $25 | $50 | $100 | Connect to existing compatible water and drain lines |
| Old washer removal | $0 | $40 | $100 | May be free with delivery or charged separately |
| Hoses or small parts | $15 | $35 | $75 | New fill hoses, clamps, or drain accessories |
Delivery and installation can add roughly $75-$250 to a local purchase. Stairs, long carry distances, tight doorways, or a second-floor laundry area may trigger additional labor charges. Sales tax depends on the buyer’s location and taxable purchase amount, so it is not included in the table.
Ask whether delivery includes moving the washer into the laundry space, connecting both fill hoses, leveling the feet, and testing a cycle. A low delivery quote may cover only curbside drop-off. If a seller charges separately for haul-away, compare that fee with municipal bulk pickup or a local recycling option.
Which model number and condition change the price most
Model identification is especially important because “Series 600” is a product-family label, not a single machine specification. The model number can help establish the washer’s capacity, age, control type, and compatible replacement parts. A matching description or photograph alone is not enough to confirm the exact version.
Age, working condition, and proof of testing usually matter more than the Series 600 badge. A washer that fills, agitates, drains, and spins during a demonstration is more valuable than one described only as “worked last time.” A loud spin cycle, leaking hose, rust, or a fault code can reduce value or make repair costs unpredictable.
Capacity also affects usefulness and resale appeal. A smaller tub around 3.5 cubic feet may cost less than a larger-capacity model, while differences in exact configuration and condition can outweigh the size premium. Confirm the capacity from the model’s specifications before paying extra for a claimed large tub.
Condition-related repair exposure can be material. A simple hose replacement may cost about $15-$75 for parts, while a professional diagnosis can run $75-$150 before repairs. A failed drain pump, control component, or transmission-related problem could push a repair into the $150-$500 range, depending on parts availability and local labor. For an older washer, a seller’s written return period can be more valuable than a small discount.
Why metro delivery and rural pickup prices differ
Appliance prices and availability vary by region. In large metro areas, more listings can create competitive prices, but delivery labor, parking, and stairs may raise the installed total. Suburban buyers may find more dealer-refurbished stock and easier truck access. Rural shoppers may face fewer nearby units and longer delivery routes.
Compared with a typical local listing, expect roughly 10%-25% more in high-cost metro areas and 5%-20% more in remote areas with limited supply. These are planning adjustments rather than guaranteed regional price differences; the condition and exact model still matter most.
Distance can change a seemingly attractive pickup deal. A washer listed for $300 may require a truck rental, straps, a helper, and fuel, potentially adding $75-$200. Dealer delivery for $100-$175 may be the lower-risk option if it includes safe placement. Ask for the complete delivered price before reserving a unit, especially when the seller is outside the buyer’s immediate area.
Local resale supply also shifts over time. A market with frequent appliance turnover can have several comparable units and more room to negotiate. In a small town, a buyer may need to pay more for a tested washer or travel farther to compare choices. Check comparable listings within a practical driving radius and compare model numbers, included service, and delivery terms.
How many labor hours does installation require
Replacing a washer in an accessible laundry room is usually a short job. Delivery crews commonly need about 30-90 minutes to move a machine inside, connect standard hoses, level it, and run a brief test. A basic professional hookup may be included in delivery or priced at roughly $25-$100 when charged separately.
Allow $75-$150 for a straightforward delivered installation, excluding the washer. A longer carry, steep stairs, narrow doorway, or removal of an old unit may increase the quote. Labor prices vary, but an independent appliance mover or installer may charge about $75-$125 per hour, often with a minimum trip fee.
Installation assumes usable water valves, a suitable drain, a grounded electrical outlet, and compatible connections. If a valve leaks or will not close, a plumber may charge roughly $150-$350 or more to repair or replace it. That work is separate from washer hookup and should be quoted before delivery day to avoid a failed installation or an unexpected service call.
Washer-only listings versus refurbished and new alternatives
A used Series 600 is often the lowest-cost route if the machine can be tested and the seller provides a reasonable return window. A dealer-refurbished unit costs more but may include cleaning, inspection, delivery, and a limited warranty. Confirm exactly what “refurbished” means: replacing one failed part is different from a complete diagnostic and documented service.
Compare the delivered, working price rather than the sticker price alone. A $300 private-sale washer can approach $500 after transport and parts, while a $550 dealer unit may include delivery and a short warranty. Conversely, a dealer premium is less compelling if the warranty excludes labor, begins only after a delay, or offers no return option.
New washers from other brands or current product lines may cost about $500-$1,000 for basic to midrange top-load models, with premium models exceeding that range. A new machine costs more upfront but typically offers current warranty coverage and clearer parts support. If the Series 600 needs a major repair, compare the repair estimate with the delivered price of a replacement before authorizing work.
When considering a different used washer, compare capacity, age, repair history, and serviceability—not just brand name. A lower-priced substitute may be a better value if it has a known service record and readily available parts. The Series 600 is not automatically worth a premium over another working top-load washer with similar condition and features.
Three realistic Series 600 purchase totals
Example quotes show why the asking price does not always predict the final budget. These scenarios assume ordinary U.S. local-market conditions, with tax excluded because rates vary by location.
| Purchase scenario | Washer | Labor and delivery | Other charges | Estimated total |
|---|---|---|---|---|
| Private pickup, tested briefly | $300 | $0 | $40 truck and straps | $340 |
| Dealer-tested, local delivery | $475 | $125 delivery and hookup | $35 hoses | $635 |
| Refurbished, stairs and haul-away | $625 | $225 delivery and labor | $75 removal | $925 |
A realistic all-in budget can range from about $340 for pickup to $925 for a higher-service purchase. The first example saves money but leaves transport and risk with the buyer. The third includes more service and difficult access, so its higher total does not represent the market price of the washer alone.
Request an itemized written quote with the washer model number, condition, warranty length, delivery address, stairs or access notes, hookup scope, removal fee, and tax. Confirm whether payment is due before testing or after the unit is placed and connected. A clear quote makes it easier to compare a low-cost listing with a dealer package on equal terms.
Which delivery and service charges can be avoided
Buyers can lower the total by arranging a safe pickup, provided they have an appropriate vehicle, tie-downs, and help to move the washer. A washer is heavy and can be damaged if transported unsecured or laid on its side without following manufacturer guidance. Compare truck rental and handling costs against the seller’s delivery fee before choosing pickup.
Set a maximum delivered price before negotiating, not just a maximum appliance price. Ask the seller to include hoses, delivery, hookup, and haul-away in one quote. Bundling may cost less than separate trips, but a buyer should verify that the washer is tested after connection and that old-appliance removal is actually included.
Keep the scope simple when the existing laundry connections are sound. Replacing usable hoses or requesting unnecessary plumbing work can add expense; however, old, cracked, bulging, or leaking hoses should not be reused merely to save a small amount. Check that the machine fits the doorway and laundry space before scheduling delivery, since a failed delivery or return trip may incur another fee.
Compare at least three offers when local inventory allows. Use the same checklist for each: exact model, capacity, age if known, test results, return policy, warranty, delivery, hookup, removal, and final price. A seller may reduce the price for prompt pickup or a flexible delivery window, but a discount is less useful if the unit cannot be tested or there is no remedy for an undisclosed fault.
For a washer that already belongs to the buyer, get a diagnosis before replacing it. A minor hose or drain issue may be much cheaper than purchasing another machine, while a repair estimate of $300-$500 on an older unit may not make financial sense. Compare the repair total with the cost of a tested replacement, including delivery, and consider how much remaining service life the repaired machine is likely to provide.