Kindred sink prices generally range from about $150 to $1,200 for the sink alone, while a straightforward replacement with installation often totals $450-$1,800. The final quote depends on bowl size, stainless-steel gauge, configuration, countertop changes, faucet work, and local labor rates.
Use these ranges as planning estimates, not as a fixed manufacturer price list. Retail prices vary by model, finish, seller, and included accessories.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Kindred sink only | $150 | $450 | $1,200 | Typical stainless-steel models; specialty configurations may cost more |
| Basic drop-in replacement | $450 | $900 | $1,500 | Sink, removal, and standard installation with compatible opening |
| Undermount installation | $700 | $1,250 | $2,200 | Requires suitable countertop support and careful sealing |
| Sink price per bowl | $150 | $350 | $700 | Broad estimate; bowl count alone does not determine price |
| Plumber labor | $75 | $125 | $200 | Per hour; regional rates and minimum charges vary |
What Kindred sinks cost by size and configuration
A compact stainless-steel Kindred sink for a bar, laundry room, or small kitchen may cost approximately $150-$350. A common single-bowl or double-bowl kitchen model is more often $250-$650. Larger workstation-style models, heavier-gauge steel, and premium finishes can reach $700-$1,200 or more, especially when accessories are bundled.
For a standard kitchen sink, budget about $300-$650 for the product before installation. These estimates assume a stainless-steel model sold through a U.S. retailer, without unusually costly delivery or countertop work. Retail promotions can put a basic model below the typical range, while a less common size or finish can push it above the average.
Sink dimensions and mounting style matter as much as the number of bowls. A 25-inch drop-in sink may fit an existing opening more easily than a 33-inch undermount model. A deeper bowl, offset drain, integrated ledge, or accessory rail can add cost even when the outside dimensions look similar. Shoppers should compare the product’s cutout dimensions, not just its listed width.
Kindred product availability and names can differ across sellers and markets. A “price list” is therefore best treated as a set of current retail quotes for matching specifications rather than one universal list. Before comparing prices, check whether the quoted sink includes a drain assembly, basket strainer, clips, sound pads, protective grid, or other accessories.
Assumptions: U.S. retail pricing, stainless-steel sink, standard residential use, and no countertop alteration.
How sink, removal, and plumbing charges shape the quote
A complete replacement quote combines the sink with removal, installation, plumbing reconnection, and any required adjustments. A simple drop-in swap may take a few hours if the new sink matches the counter opening and existing drain layout. Undermount work can require additional support, sealing, and coordination with a countertop installer.
| Quote component | Typical range | Pricing basis | What changes the charge |
|---|---|---|---|
| Kindred sink | $150-$1,200 | Per sink | Size, gauge, finish, bowls, and accessories |
| Removal and disposal | $50-$200 | Per existing sink | Sealant, access, condition, and disposal rules |
| Installation labor | $150-$500 | Per job | Mount type, fit, crew minimum, and local rates |
| Drain and faucet reconnection | $75-$300 | Per job | New fittings, leak repairs, and plumbing alignment |
| Countertop or cabinet changes | $100-$800 | Per job | Cutout adjustment, edge work, or reinforcement |
| Delivery and small supplies | $20-$150 | Per order | Distance, retailer terms, sealant, clips, and fittings |
The sink itself is only part of the installed price; countertop compatibility is often the biggest surprise. The lower end assumes a same-size drop-in replacement with accessible plumbing and reusable faucet components. If the opening must be enlarged or the cabinet needs reinforcement, a quote can rise by several hundred dollars.
Ask whether the estimate includes removal, disposal, reconnecting the faucet and drain, leak testing, and sales tax. A low labor quote may exclude a plumber’s service call or minimum fee. If a separate countertop contractor is required, confirm that the two trades agree on the cutout size and installation sequence before ordering.
Example: 3-5 labor hours at $90-$150 per hour equals roughly $270-$750 before materials, minimum charges, or extra trades.
Which bowl dimensions and steel gauges raise the price
Width, depth, and bowl layout influence both the product cost and the work needed to fit it. A 15-20-inch bar or utility sink generally costs less than a 30-33-inch kitchen sink, although a compact premium model can exceed a basic large sink. A 9-10-inch-deep bowl may be priced above a shallow basic model and can require checking cabinet clearance and drain connections.
Steel thickness is another comparison point. Many stainless-steel sinks use gauges in the general 16- to 20-gauge range; a lower gauge number indicates thicker steel. A heavier 16- or 18-gauge model may cost more than a 20-gauge entry-level sink, but gauge does not by itself guarantee lower noise or better durability. Sound pads, finish quality, support, and installation also matter.
Confirm the cutout and cabinet dimensions before paying for a larger or heavier model. A sink advertised as 33 inches wide may need a particular minimum cabinet width, while an undermount version relies on a precise countertop opening. If the existing cutout differs by more than about 1/2 inch, the installer may need to modify the counter or recommend a different model.
Single-bowl models often provide uninterrupted room for large cookware, while double-bowl designs divide the basin and may require more attention to drain placement. Workstation ledges and included accessories can raise the purchase price by $100-$300 or more compared with a plain bowl. These features are worthwhile only if the household will use them; a basic sink with a separate grid may cost less.
Finish and mounting style can alter the project total independently of the steel grade. A drop-in rim covers the cut edge and is usually simpler to replace. An undermount sink leaves the counter edge exposed and needs secure attachment and water-resistant sealing, making labor and countertop condition more important.
Drop-in, undermount, and workstation models compared
Drop-in Kindred sinks are generally the least expensive to install when replacing another drop-in sink in the same opening. Product prices commonly fall around $150-$700, with installation often adding $200-$600. A change in outline, corner shape, or bowl position can still require counter adjustments even when the nominal width matches.
Undermount sinks commonly cost about $250-$900 for the product, with installed totals around $700-$2,200. The high end reflects premium sink specifications, complex mounting, stone-counter work, or plumbing changes. For an existing undermount replacement, the installer must also inspect the support system and old sealant; a damaged cabinet or counter can make the job substantially more involved.
Workstation models trade a higher purchase price for built-in accessory features. A model with a ledge, cutting board, drying rack, or fitted grid may run $500-$1,200, and an installation can bring the total to approximately $800-$1,800. Compare included accessories individually: a high sticker price may include items that otherwise cost $50-$200 each, but optional accessories should not be treated as necessary installation parts.
For a like-for-like comparison, record the model number, outside dimensions, cutout dimensions, bowl depth, steel gauge, mount type, included drain, and accessory package. Two listings with similar photos may have different dimensions or included fittings. Retailer return fees and restocking terms can also matter when a sink does not fit the prepared opening.
How long a Kindred sink replacement takes to install
A compatible drop-in replacement usually takes about 2-4 hours for removal, fitting, reconnection, and testing. An undermount installation may take 4-8 hours of trade time, with extra scheduling if countertop work or curing time is needed. These estimates describe labor, not necessarily the elapsed time from ordering to a working sink.
Plumbers and handymen may charge around $75-$200 per hour, often with a service-call minimum of $100-$250. A fixed-price sink replacement commonly covers a defined scope, such as removing one sink and reconnecting existing plumbing. Faucet replacement, new shutoff valves, drain relocation, or cabinet repair may be billed separately.
Labor estimates are most reliable when the installer sees the existing mount and plumbing arrangement. Before requesting a quote, provide photos below the sink, the current sink’s dimensions, the new model’s cutout sheet, and the countertop material. This can reveal a mismatch before the sink is delivered and reduce the risk of a second visit.
Schedule an undermount replacement only after confirming who handles the counter and who provides mounting hardware. Some countertop firms require their own installer to detach or attach the sink. If the sink is unavailable locally, delivery timing can also delay the job; confirm the return window and inspect the product before removing the existing sink.
Three replacement quotes for common kitchen sink jobs
The following examples show how scope changes the bill. They use illustrative U.S. rates rather than fixed Kindred model prices, and assume ordinary residential access. Local service minimums, taxes, and retailer promotions can change the total.
| Job scenario | Product and labor detail | Estimated total |
|---|---|---|
| Basic drop-in swap | $280 sink, 3 labor hours at $100, $80 removal and supplies | $660-$850 |
| Large double-bowl replacement | $520 sink, 4 labor hours at $125, $150 plumbing and disposal | $1,050-$1,350 |
| Undermount workstation upgrade | $850 sink, 6 labor hours at $145, $350 counter or support work | $1,900-$2,400 |
Compare quotes by matching the same sink specification and included tasks. In the first example, a $280 product represents roughly $9-$11 per inch for a sink about 25-30 inches wide, but per-inch cost is only a rough comparison because depth, gauge, and included parts vary. The installer’s hours and the amount of counter work make the larger difference.
A quote that omits plumbing parts may appear cheaper by $75-$250. Conversely, an installer may include new strainers, trap fittings, sealant, and testing in a single price. Request an itemized estimate that distinguishes the sink, labor, removal, plumbing materials, countertop work, and tax so that competing bids can be compared fairly.
How U.S. location changes sink installation pricing
Retail sink prices are often more consistent nationally than labor charges, though shipping and retailer inventory can affect the product total. Installation in high-cost metro areas may run 15%-35% above a national-style estimate, while some smaller markets may be 10%-20% lower. These are planning differences, not guaranteed regional price rules.
For a basic drop-in replacement, an area with modest labor rates might produce a $450-$850 total, compared with roughly $650-$1,200 in a higher-cost city. Undermount jobs can show a wider spread because countertop trades, scheduling, and travel charges vary. Rural homeowners may see lower hourly rates but higher trip fees or fewer contractors willing to handle a small job.
Request at least two local quotes using the same model and scope. Ask whether the price includes a service-call minimum, travel, disposal, and a return visit if a leak appears. A bid that is 20% lower may be reasonable when the job is simple, but it should not omit necessary mounting support or testing.
Seasonal demand can affect appointment availability more than the sink’s shelf price. A replacement needed urgently after a leak may involve an emergency or after-hours charge, commonly adding $100-$300 or more. Planning the replacement before a failure allows time to compare retailer pricing, verify fit, and choose a standard appointment slot.
Where to trim the Kindred sink budget safely
The most dependable savings come from keeping the job within the existing cutout and plumbing layout. Choose a sink with compatible dimensions and mounting style instead of paying for countertop alteration. Reuse a serviceable faucet and drain assembly when the installer confirms they fit and are in good condition; replacing them adds parts and labor.
Spend on fit and usable construction before optional accessories or a more expensive finish. A standard stainless-steel sink may meet the need at $250-$500, while a premium package can add $200-$500. Compare the exact included parts and warranty terms rather than assuming every premium feature improves performance for a particular kitchen.
Get written quotes from two or three installers and ask each to price the same scope: removal, sink installation, faucet and drain reconnection, sealing, leak test, and disposal. A fixed-price quote can be easier to budget than an hourly estimate, provided it identifies exclusions. Confirm the contractor’s rate for unforeseen work before authorizing countertop or cabinet changes.
Prepare the work area by emptying the cabinet and clearing access, but do not disconnect water lines or remove the old sink unless the installer requests it. DIY removal can cause cabinet damage, plumbing leaks, or countertop chipping that costs more to repair. For a simple drop-in sink, capable homeowners may reduce labor by doing their own installation, but undermount work and stone-counter modifications are better priced as professional trade work.
Finally, avoid ordering before measuring the cabinet, opening, and drain position. Check the retailer’s return policy and delivery inspection rules. A restocking charge or return freight can erase any sale savings if the model is incompatible, while a verified fit helps keep the final Kindred sink price close to the original estimate.