A King Pellet Stove 5502M typically costs about $1,200-$1,800 for the stove alone, with an average purchase price near $1,500. A complete installed setup often totals $2,000-$4,000, depending on venting, labor, local permits, and whether the home already has a suitable exhaust route.
Prices vary because the 5502M may be sold as new, clearance, or used inventory, and installation conditions differ from home to home.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 5502M stove | $1,200 | $1,500 | $1,800 | New unit; availability affects price |
| Venting and installation materials | $250 | $600 | $1,200 | Depends on route and components |
| Professional installation | $500 | $900 | $1,500 | More for difficult access or new venting |
| Typical installed total | $2,000 | $3,000 | $4,000 | Before unusual electrical or structural work |
What a King 5502M pellet stove typically costs
Plan on roughly $1,200-$1,800 for a new stove and $2,000-$4,000 for a professionally installed setup. The appliance-only range assumes standard new or clearance inventory, not a bundled delivery or installation package. The 5502M is a freestanding pellet stove, so the final budget also depends on an approved vent system, hearth protection, and safe clearances.
Used units may list for about $400-$900, but condition, included parts, and service history matter. A low asking price may not include a working igniter, control board, blower, or the venting needed to install the stove. Buyers should confirm the exact model and included accessories before comparing listings.
Assumptions: U.S. retail pricing, standard-quality components, and a typical residential installation with no major structural changes.
How the 5502M stove, venting, and labor shape a quote
A contractor’s estimate may bundle components or list them separately. The following ranges show common cost areas; actual quotes depend on the selected vent system, access, and local labor rates.
| Quote component | Typical price | What changes the charge |
|---|---|---|
| 5502M appliance | $1,200-$1,800 | Retailer, stock, and included accessories |
| Pellet vent pipe and fittings | $250-$800 | Pipe length, elbows, and wall or roof exit |
| Hearth pad or floor protection | $100-$400 | Required dimensions and material |
| Installation labor | $500-$1,500 | Access, vent route, and installer rates |
| Permit or inspection | $50-$300 | Municipal requirements and inspection fees |
Labor may be estimated as a flat project fee or by time. For hourly work, a broad planning range is $75-$125 per hour, with a typical one-day installation requiring about 5-10 labor hours.
How vent length and room size change 5502M pricing
The vent route is often the largest installation variable after the stove itself. A direct, short exit through an exterior wall can keep materials and labor toward the lower end. A route that rises through multiple floors or exits through the roof can add $300-$1,000 or more for pipe, supports, flashing, and extra work.
Room size also affects whether this model is an appropriate choice, but square footage alone does not determine installation cost. Open layouts, high ceilings, insulation, and cold-climate exposure influence heating needs. If the intended area is around 2,000 square feet or larger, have the installer check the stove’s capacity against the home’s heat loss rather than relying only on a product-area claim.
Nonstandard floor surfaces, tight clearances, or a need to move electrical outlets can add another $100-$600. Repairs to a chimney or wall opening are separate scope and can raise the quote substantially.
What installation adds beyond the 5502M shelf price
Ask whether the quote includes delivery, vent parts, floor protection, startup, and haul-away of old equipment. Delivery may add $50-$200, while removal and disposal of an existing stove commonly adds $100-$400. Electrical work, if needed, may be billed separately at about $100-$300 for a straightforward outlet or circuit adjustment.
Some installers charge a site-visit or diagnostic fee of $75-$200, sometimes credited toward the work. A rushed installation during peak heating season may cost more or face a longer wait. Compare written quotes by included scope, not just by the final total.
How 5502M quotes differ across U.S. regions
Installation labor and permitting can shift totals even when the stove price is similar. Urban markets and high-cost coastal areas may run about 10%-25% above a national midpoint, while some rural markets may be 5%-15% lower. Rural locations can still cost more if the installer must travel a long distance or source uncommon parts.
Cold-weather regions may have busier installers in fall and early winter, limiting appointment availability. Local building rules also vary; a permit, inspection, or additional clearance work can add $50-$500. Confirm requirements with the local building department and ask the installer to identify any code-related work in the estimate.
Three realistic budgets for buying and installing a 5502M
A stove-only purchase at $1,400, with buyer pickup and no installation, totals about $1,400 before tax. This fits a buyer who already has a compatible setup and can safely arrange the work, but should not be treated as the price of a complete installation.
A straightforward wall-exit project might include a $1,500 stove, $350 in venting and floor protection, and 6 labor hours at $100 per hour. That produces a pre-tax total of about $2,450, before any permit fee or delivery charge.
A more involved installation could include a $1,700 stove, $850 in vent materials, 10 labor hours at $115 per hour, and $200 for removal. The estimated subtotal is about $3,900 before tax, permits, or unexpected repairs. These examples show why a site-specific quote matters more than a single advertised price.
Ways to lower the King 5502M purchase and install cost
Compare at least three itemized quotes and confirm that each includes the same vent length, floor protection, delivery, startup, and permit allowance. Buying the stove and installation together can simplify responsibility, but a bundle is not automatically less expensive; compare its total with separate, equivalent quotes.
Keep the vent route short and accessible when the home layout and code allow it. Schedule outside the busiest fall period if timing is flexible, and ask whether a verified clearance unit includes a full warranty. Avoid purchasing a used stove until a technician has checked major electrical and combustion components.
Do not cut required clearances, vent components, or inspection work to save money. Those items affect safe operation and may be required by the manufacturer’s instructions or local rules. A repairable existing installation may also cost less than replacing every component, but only after an installer confirms compatibility and condition.