A King radial arm saw typically costs $200-$900 used in the U.S., with an average sale near $500; refurbished machines and hard-to-find new-old-stock models can cost more. Price depends mainly on blade capacity, condition, included accessories, and whether the saw can be inspected or shipped.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used King saw | $200 | $500 | $900 | Working machine, local pickup |
| Refurbished saw | $600 | $950 | $1,400 | Serviced, possibly with limited warranty |
| New-old-stock or comparable new model | $900 | $1,300 | $1,800 | Availability and model vary |
| Moving and setup | $50 | $175 | $450 | Distance, weight, and stairs affect charges |
What a King radial arm saw costs in working condition
Most buyers should budget $350-$700 for a usable secondhand King radial arm saw with a sound motor, intact arm, and basic fence. Smaller or older machines needing adjustment may list for $150-$350, while clean 12-inch models with a stand and accessories can reach $700-$1,000. Actual prices depend on local supply, and asking prices may exceed completed-sale amounts.
Refurbished examples commonly fall around $600-$1,400, depending on parts replaced and whether the seller demonstrates accurate crosscuts. A new King-branded machine may be difficult to source in the U.S.; verify the exact model and warranty rather than assuming a listing is current retail inventory. Assumptions: U.S. local-market prices, standard 10- or 12-inch saw, ordinary access, and no major electrical work. A tested used machine usually offers the lowest purchase price, but condition can outweigh the model name.
How motor, blade, and delivery shape the quote
For a used purchase, the machine itself is only part of the budget. Sellers may include a stand, fence, guard, and blade, but missing parts or transport can quickly change the total. The following ranges are typical planning allowances, not guaranteed dealer fees.
| Cost item | Typical price | What changes it |
|---|---|---|
| Used saw and stand | $200-$900 | Capacity, condition, included base |
| Replacement blade | $25-$90 | 10- or 12-inch size and tooth type |
| Fence or guard parts | $30-$180 | Availability and compatibility |
| Inspection and adjustment | $75-$250 | Shop rate and alignment needed |
| Delivery or hauling | $50-$450 | Distance, weight, stairs, loading |
Used machines are often sold as-is, so confirm which accessories are included before comparing quotes. Allow $100-$300 beyond the asking price for a blade, basic setup, or local transport when those items are not included.
Why 10-inch and 12-inch models command different prices
Blade size affects cutting capacity and replacement-blade cost; a 12-inch model may sell for $50-$200 more than a similar 10-inch saw when condition and accessories are comparable. Motor power, arm reach, and table width also matter, especially for buyers who need wider crosscuts. Check the model plate and manual: model specifications can vary, and age alone does not establish capacity.
Condition creates larger swings than minor specification differences. A motor that starts smoothly and runs without unusual noise is preferable to one with a claimed higher rating but uncertain electrical condition. Verify that the arm locks securely, the carriage travels evenly, and the blade guard and anti-kickback parts are present. Repairs to a damaged arm, worn bearings, or electrical components can make a low listing uneconomical. Budget extra when a saw needs structural or electrical repairs, not just routine blade replacement.
Should you buy used, refurbished, or new-old-stock?
A used saw at $300-$600 can be the best value if it is demonstrated under power and the buyer can collect it. Refurbished machines often cost $600-$1,400 because service time and replacement parts are included, though warranty coverage should be confirmed in writing. New-old-stock pricing can exceed $900 and may not include modern safety features or readily available support.
For comparison, a comparable new sliding miter saw may cost roughly $250-$800, while a larger professional model can be $800-$1,500. It may take less space and be easier to transport, but its cutting capacity and work support differ. Compare the specific cuts needed and safety equipment, not just the purchase price.
Three realistic King saw purchase totals
A local 10-inch saw priced at $250, with a $45 blade and $75 pickup expense, comes to about $370 before tax. This assumes the motor and carriage test well and no repairs are required.
A clean 12-inch machine listed at $650, with $60 for a blade and $125 for delivery, totals about $835. A shop inspection or alignment adjustment could add another $100-$200.
A refurbished saw priced at $1,050 with a limited service warranty and included stand may total $1,150-$1,300 after delivery and tax. These examples are estimates; local sales tax and seller terms change the final amount. Ask for an itemized total that separates the saw, accessories, service, and transport.
Repair and setup expenses to check before pickup
Routine blade replacement is usually the least expensive upkeep, often $25-$90 for a suitable blade. A basic alignment check may run $75-$250, while a motor repair or replacement can cost $150-$500 or more depending on parts and shop labor. Used replacement parts may reduce the bill, but compatibility should be confirmed by model number.
Inspect the saw unplugged, then request a controlled demonstration if the seller permits it. Look for damaged wiring, excessive carriage play, a cracked table, and missing guards. A contractor or repair shop might charge $75-$125 per hour, with a one- to two-hour evaluation or adjustment costing roughly $75-$250. Do not treat a running motor as proof that the saw is aligned or safe to operate.
How to lower the price without inheriting costly repairs
Compare at least three local listings and ask sellers to identify the model, blade size, accessories, and any recent service. A complete machine can be less expensive overall than a cheaper saw missing a guard, fence, or stand. Negotiating based on documented missing parts is more useful than relying on age alone.
Local pickup can avoid freight charges, but a radial arm saw is heavy and awkward; arrange suitable help and vehicle space before agreeing to collect it. If the saw needs only a blade or minor adjustment, price those items before bidding. If the arm, motor, wiring, or table is damaged, compare repair cost against a tested replacement. Set a maximum all-in budget before purchase, including transport, tax, parts, and inspection.