A kitchen chimney, commonly called a range hood in the United States, typically costs $250-$2,500 for the unit, with installed prices often reaching $500-$4,000. Price depends on hood style, airflow capacity, ductwork, finish, and whether installation requires electrical or cabinet changes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Wall-mount hood | $250 | $800 | $2,500 | Unit only; 30-36 inches wide |
| Under-cabinet hood | $100 | $450 | $1,200 | Basic to midrange models |
| Island hood | $700 | $1,600 | $4,000 | Unit only; ceiling support affects price |
| Professional installation | $250 | $650 | $1,500 | More if new ductwork or wiring is needed |
What a 30-inch kitchen chimney usually costs
For a standard 30-inch wall-mount chimney hood, buyers commonly pay $400-$1,300 for the appliance and $750-$2,000 installed. A basic stainless-steel model with 300-600 CFM airflow tends to sit near the low end; a quieter unit with stronger extraction, better controls, and premium finish costs more. Island-mounted and custom-integrated models usually exceed this range.
For a straightforward replacement using existing ductwork, budget about $1,000-$1,500 total. That assumes a midrange hood, normal access, and no cabinet or electrical alterations. Regional labor and local code requirements can shift the estimate.
Assumptions: 30-inch hood, standard stainless steel, existing compatible duct route, ordinary U.S. access.
How appliance, duct, and labor charges shape the quote
A complete estimate separates the hood from installation work. A contractor may charge more when the old unit is difficult to remove, the duct is undersized, or the new chimney needs a different mounting arrangement.
| Quote item | Typical price | What changes the charge | Unit basis |
|---|---|---|---|
| Chimney hood | $250-$2,500 | Style, controls, finish, airflow | Per unit |
| Installation labor | $250-$900 | Replacement versus new installation | $75-$125 per hour |
| Duct and fittings | $100-$600 | Run length, diameter, elbows | $10-$35 per linear ft for duct materials |
| Electrical work | $100-$500 | Outlet location and circuit changes | Per job |
| Removal and disposal | $50-$200 | Hood size and haul-away service | Per unit |
Installation and duct adjustments are often the largest costs after the hood itself. Ask whether the quote includes removal, duct sealing, a wall or roof cap, and cleanup.
Why CFM, duct diameter, and mounting height change pricing
Airflow capacity is measured in CFM, or cubic feet per minute. Basic hoods rated around 250-400 CFM may cost $150-$600, while 600-1,000 CFM models often run $600-$2,000. Higher capacity can require larger ducting and may trigger makeup-air requirements under local codes, adding hundreds or more to the job.
Duct size and route matter as much as the rating. A short, straight 6-inch duct run may need only modest adaptation, but a route longer than 15-20 feet or several tight bends can reduce airflow and raise labor and material charges. A hood mounted above a high-output range may also need greater capture depth or capacity.
Confirm the manufacturer’s duct diameter and mounting-height specifications before buying. A mismatch can lead to extra fittings, poor performance, or a costly return.
Which installation conditions add the most labor time
A like-for-like replacement can take about 2-4 hours, while a first-time installation commonly takes 4-8 hours. At $75-$125 per hour, a basic labor allowance works out to roughly $150-$500 for replacement work, before disposal or materials. New duct routes, island ceiling supports, and electrical changes can push labor above that range.
Existing ductwork is the main labor-saving condition. If the old vent is recirculating, converting it to exterior venting may require wall or roof penetration, weatherproofing, and additional finish work. Confirm whether the installer is responsible for patching and painting.
Wall, island, and under-cabinet chimney prices compared
Under-cabinet units are generally the least expensive, with common appliance prices of $100-$1,200. Wall-mount chimney hoods often cost $250-$2,500, while island models commonly range from $700-$4,000 because they need ceiling mounting and a finished chimney cover. Insert or liner units for custom cabinetry usually cost $300-$1,800, excluding cabinet construction.
Choose the hood style that fits the existing kitchen layout before comparing features. Changing from under-cabinet to island mounting can make structural and duct work more expensive than the appliance upgrade itself.
Extra charges for ducting, permits, and premium features
New exterior ducting commonly adds $300-$1,500, depending on route and access. Roof or exterior wall caps may add $30-$150 in materials, while difficult roof work can raise labor charges. A permit may cost $50-$300 where required; electrical or structural work can involve separate inspections and fees.
Quiet motors, adjustable lighting, touch controls, heat sensors, and built-in makeup-air systems can add $100-$1,000 or more compared with basic models. Recirculating filters may cost $20-$100 per replacement set, and premium baffle filters can cost $50-$200. Verify whether the listed appliance price includes the chimney extension, filters, and duct adapter.
How regional labor rates shift installed hood prices
Installed pricing can be 10%-25% higher in high-cost metro areas than in lower-cost rural markets, especially where licensed electricians or roofers are needed. Dense urban buildings may add charges for access, parking, building approvals, or long waits for service elevators. Rural projects may have lower hourly rates but higher travel or minimum-service fees.
Compare local installed quotes rather than appliance prices alone. Request the same hood size, duct scope, disposal, and electrical assumptions from each contractor so the price difference is meaningful.
Ways to lower the kitchen chimney installation bill
Keeping the current hood type, width, duct location, and electrical connection can avoid major modification charges. A 30-inch model can cost less than a 36-inch unit, and standard stainless steel is usually less expensive than custom finishes. Select airflow based on the cooking appliance and manufacturer guidance rather than paying for capacity the kitchen does not need.
Measure the opening and check duct diameter before ordering. Compare at least three written quotes, with labor, materials, permits, disposal, and finish repairs itemized. If the motor or controls failed on a relatively new hood, compare repair cost with replacement; a service call and repair may total $150-$500, but parts availability and unit age affect the decision.
The most reliable savings come from avoiding unnecessary duct relocation and feature upgrades. Keep the scope consistent across estimates and confirm warranty coverage for both the appliance and installation.