A kitchen faucet typically costs $150-$600 installed, with an average total near $350 for a standard replacement. The fixture type, plumbing condition, sink configuration, and local labor rates determine whether a quote falls below or above that range.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Faucet fixture | $50 | $250 | $1,000+ | Price varies by finish, brand, and features |
| Professional installation | $100 | $200 | $450 | Standard replacement, excluding major plumbing repairs |
| Installed replacement | $150 | $350 | $1,450+ | High end includes premium fixtures or difficult access |
| Faucet repair | $75 | $150 | $300 | Depends on diagnosis and replacement parts |
What a Standard Kitchen Faucet Replacement Costs
For a basic pull-down or single-handle faucet and straightforward replacement, homeowners commonly pay $150-$600 total. A practical average is about $350, including a $150-$250 fixture and $150-$250 in labor or service charges. The low end usually means a basic faucet and easy access; premium finishes, touchless controls, or extra plumbing work can push the total over $1,000.
Faucet prices run roughly $50-$150 for simple models, $150-$400 for midrange options, and $400-$1,000 or more for premium or specialized designs. Assumptions: standard U.S. kitchen sink, existing shutoff valves in working order, and no countertop or sink replacement. Costs vary by market and installation conditions.
A standard, uncomplicated replacement is often a $250-$500 project when the fixture and labor are both midrange.
How Fixture, Labor, and Removal Charges Shape the Quote
Quotes may combine the faucet, installation, and old-unit disposal into one total. Ask whether the plumber’s minimum service charge applies even if the work takes less than an hour, and whether the quoted fixture is included. Labor commonly takes 1-2 hours for a normal replacement; corroded connections or cramped cabinet access can extend the visit.
| Quote item | Typical price | What it covers | Possible extra |
|---|---|---|---|
| Faucet | $50-$1,000+ | Basic through premium models | Soap dispenser or filtration accessory, $20-$200 |
| Labor | $100-$300 | Disconnect, install, test | Complex access or corroded fittings |
| Equipment and supplies | $10-$75 | Supply lines, sealant, small fittings | New shutoff valve, $50-$150 each installed |
| Removal and disposal | $0-$50 | Haul away old faucet | May be included in labor |
A $100-$175 hourly rate for 1-2 hours suggests $100-$350 in labor before a service-call minimum or parts.
Request an itemized quote to distinguish the faucet price from labor, supplies, and service fees.
Do Sink Holes and Faucet Features Change the Price?
Yes. A one-hole faucet generally fits a modern single-hole sink, while a three-hole setup may need a deck plate or a faucet designed for that spacing. A deck plate typically adds $10-$50 if it is not included. Converting the sink or countertop to a different hole layout can add $100-$300 or more, depending on the surface and installer.
Pull-down and pull-out sprayers often cost $100-$400, while touchless or smart models commonly fall around $250-$800. Water filtration faucets may cost $150-$500, not including a compatible filter system. A heavier or unusually deep sink can also complicate access beneath the cabinet, increasing labor.
Confirm the number and spacing of sink holes before buying; a mismatch can create installation expense beyond the faucet price.
How to Lower the Installed Price Without Cutting Corners
Choose a faucet that matches the existing hole layout and plumbing connections. This avoids paying for countertop drilling, adapters, or a layout change. A reliable midrange fixture can keep the faucet portion near $150-$300 without paying extra for app controls or finishes that do not serve a practical need.
Clear the cabinet before the appointment and share photos of the faucet, sink holes, shutoff valves, and under-sink space when requesting estimates. Compare at least two itemized quotes on the same fixture and scope. Ask whether the price includes disposal, supply lines, taxes, and any service-call minimum.
Matching the new faucet to existing connections is usually the most controllable way to avoid add-on labor.
When Repairing the Existing Faucet Costs Less
A repair may be worthwhile when the faucet body is sound and the issue is a worn cartridge, aerator, or spray hose. Parts often cost $10-$100, with a plumber’s visit and labor bringing a typical repair to $75-$300. A simple aerator replacement may cost less if handled without a service call.
Replacement is more likely to make financial sense when the faucet leaks from multiple points, has heavy corrosion, or needs repeated repairs. Compare the repair quote with the price of a new midrange fixture plus installation. A repair requiring a special discontinued part can approach the cost of replacing a basic faucet.
For a sound faucet with one failed component, a targeted repair can save money; recurring leaks make replacement more compelling.
How Long Installation Takes and What Slows It Down
A plumber may spend 1-2 hours on a typical swap, including testing for leaks. Removing a seized faucet, replacing shutoff valves, or working in a crowded cabinet can add 1-3 hours. If valves need replacement, ask whether the estimate includes parts and whether water must be shut off to the home.
Many plumbing companies charge a $75-$175 service or minimum fee, sometimes applied to labor. Emergency or after-hours calls may carry a $100-$300 premium over normal scheduling, especially when a leak cannot wait. Labor estimate: 1-2 hours × $100-$175 per hour, before applicable minimums or added work.
Photos and a clear description of stuck fittings or leaks can help prevent a basic-installation quote from missing likely labor.
Why Kitchen Faucet Prices Differ Across U.S. Markets
Labor and service fees are often higher in large coastal cities and dense metro areas than in smaller towns. As a broad budgeting adjustment, urban markets may run 10%-25% above a typical national estimate, while some rural markets may be 5%-15% below it; travel distance or limited contractor availability can reverse that difference.
Fixture retail prices are less tied to location than installation charges, though local inventory, delivery, and sales tax affect the final bill. Compare local quotes rather than applying a national average rigidly, and check whether the contractor charges separately for travel or parking.
Regional differences usually affect labor and service charges more than the faucet’s listed retail price.