A Kitchen Kompact price list is generally supplied through dealers rather than as one fixed national retail schedule, so the final quote depends on cabinet selections, kitchen dimensions, finish, and delivery. For a typical 10-by-10-foot kitchen, budget about $3,000-$7,000 for cabinets alone or $5,000-$11,000 with professional installation, before countertops and appliances.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cabinets for a 10-by-10-foot kitchen | $3,000 | $4,800 | $7,000 | Standard framed cabinets; cabinet package only |
| Cabinets per linear foot | $150 | $240 | $350 | Approximate installed cabinet run value, not countertop |
| Installation labor | $1,500 | $2,700 | $4,000 | Typical kitchen with ordinary access |
| Installed cabinet project | $5,000 | $7,800 | $11,000 | Cabinets and installation; excludes counters and appliances |
Assumptions: U.S. dealer pricing, standard-size cabinet layout, midrange finish, and no major plumbing or electrical changes.
What Kitchen Kompact cabinets cost for a standard kitchen
For planning purposes, a standard 10-by-10-foot Kitchen Kompact cabinet package commonly falls around $3,000-$7,000 before installation. A modest layout with stock sizes and limited trim may land near the low end; more cabinets, upgraded door styles, organizers, and finished ends push the order higher. The average package is about $4,800 under ordinary selection and layout assumptions.
Another useful comparison is roughly $150-$350 per linear foot of cabinet run for the cabinet package. This is a budgeting measure rather than a manufacturer’s guaranteed rate: base and wall cabinets, tall units, corner cabinets, and decorative panels have different prices. Cabinet-only estimates should not be confused with a full remodel quote that includes countertops, demolition, flooring, or appliances.
Budget about $3,000-$7,000 for a typical cabinet order and confirm the exact door, finish, and accessory list with a local dealer.
Assumptions: 20-25 linear feet of combined cabinet runs, standard cabinet heights, and no custom carpentry.
How cabinet materials, delivery, and labor appear in a quote
Dealer quotes may group cabinets and accessories together, while installation and delivery appear as separate charges. Ask for an itemized estimate that identifies cabinet quantities, finish, trim, freight, removal, and labor. That makes it easier to compare two bids with different assumptions or to spot a missing expense.
| Quote item | Typical price | What changes the charge | Often included | Check before ordering |
|---|---|---|---|---|
| Cabinet boxes and doors | $3,000-$7,000 per 10-by-10 kitchen | Cabinet count, door style, finish | Selected base and wall units | Confirm end panels and fillers |
| Hardware and accessories | $100-$1,000 per kitchen | Drawer slides, pullouts, handles | May vary by package | List every organizer and pull |
| Delivery | $150-$600 per order | Distance, truck access, order size | Usually not installation | Ask about stairs and inside delivery |
| Installation labor | $1,500-$4,000 per kitchen | Cabinet count, leveling, site prep | Hanging and fastening cabinets | Clarify removal and trim work |
| Removal and disposal | $300-$900 per kitchen | Old cabinet volume and disposal rates | Often separately priced | Confirm whether walls are patched |
Labor can be estimated as . A two-person crew working 20-35 hours at a combined billing rate of $75-$125 per hour produces approximately $1,500-$4,375 in labor charges. The actual quote may use a flat project price instead.
Compare the same cabinet scope, delivery terms, and installation tasks rather than comparing only the package total.
Assumptions: Typical contractor rates vary by market; taxes and major site repairs are not included.
Which door styles and cabinet upgrades raise the price?
Door style and finish affect the cabinet package, but the impact depends on the selected product line and dealer discount. A basic painted or stained option may stay close to the standard package, while special finishes, decorative details, and matching panels can add several hundred dollars or more. Ask whether the quoted price includes the same finish on exposed ends and any island panels.
Accessories are another frequent source of price differences. A standard shelf cabinet costs less than a cabinet fitted with pullout trays, spice storage, waste sorting, or upgraded drawer hardware. Allow about $100-$400 for a few simple accessories, or $500-$1,000 or more when the order includes several pullouts and upgraded storage components.
Trim can be easy to overlook. Crown molding, light rail, toe-kick skins, fillers, and finished end panels are often priced separately or depend on the layout. A kitchen with several exposed sides or a decorative hood surround can add $200-$800 or more, depending on the quantity and finish.
Request a line-by-line list of finish, hardware, trim, and finished panels so an attractive base quote does not omit visible details.
Assumptions: Accessory and trim ranges are broad planning allowances, not a confirmed Kitchen Kompact dealer price schedule.
How kitchen size and cabinet counts change the estimate
A 10-by-10-foot kitchen is a comparison convention, not a guarantee that every layout contains the same number of cabinets. A compact galley may need fewer units than an open kitchen with an island, pantry, and long wall of storage. A practical early estimate is $150-$350 per linear foot of cabinet run, with adjustments for tall units, drawer bases, corners, and finish choices.
For a small 12-16-linear-foot layout, cabinet-only pricing may be about $2,000-$5,000. A larger 30-40-linear-foot layout can reach $5,000-$12,000 or more before installation, particularly when it includes a pantry, island, and numerous drawers. These ranges use typical value-to-midrange selections and should be treated as preliminary until a cabinet schedule is prepared.
Ceiling height also matters. Standard-height wall cabinets may fit without custom modifications, while extending cabinets higher can require taller units, stacking cabinets, extra trim, or additional installation work. A run with ceilings above 9 feet or a soffit removal can change both the quantity and labor estimate.
Count cabinet runs and special units first; room square footage alone is a weak predictor of cabinet cost.
Assumptions: Linear footage refers to approximate cabinet run length, not floor area; actual mix of base, wall, and tall cabinets changes the rate.
Why regional labor rates and delivery distance matter
Cabinet package prices can vary by dealer, freight route, and local promotions, while installation rates are especially sensitive to local wages and contractor availability. In many high-cost metro areas, installed labor may run 15%-30% above a national planning estimate. Smaller markets may be 5%-15% lower, but fewer nearby dealers can offset savings through freight or limited installer availability.
Delivery distance can be significant when a dealer must transport an order from outside the local area. A nearby standard delivery may cost about $150-$300; a longer route, difficult access, or special delivery appointment can bring the charge to $400-$600 or more. Rural addresses and homes with narrow driveways may also require extra handling or a second trip.
Local tax treatment varies. Depending on state and local rules, tax may apply to cabinets, delivery, labor, or some combination. A quote that looks lower before tax can be more expensive at checkout, so request a final total with tax and freight stated separately.
Compare delivered totals from local dealers, not just advertised cabinet prices, and ask what delivery includes.
Assumptions: Regional percentages are planning comparisons, not fixed statewide rates.
What three Kitchen Kompact project quotes might include
A small replacement kitchen with 14 linear feet of standard cabinets, basic hardware, and no island might have a $2,500-$4,000 cabinet order. If removal costs $300-$600 and installation takes 16-24 crew hours at $75-$125 per hour, the project may total about $4,000-$7,600 before countertops, tax, and wall repairs.
A typical 10-by-10 kitchen with 22 linear feet, several drawer bases, finished ends, delivery, and ordinary installation could price at $4,000-$6,000 for cabinets. Add $250-$500 for delivery, $2,000-$3,200 for installation, and $400-$700 for removal, producing a likely total of roughly $6,650-$10,400 before counters or appliances.
A larger kitchen with 35 linear feet, an island, pantry storage, upgraded pullouts, and extra trim could have a cabinet package of $7,000-$11,000. Delivery and handling may add $400-$800, removal $500-$900, and installation $3,000-$5,000. That places the cabinet-and-labor scope around $10,900-$17,700, excluding countertops and changes to plumbing or electrical.
These examples illustrate why similar-looking kitchens can receive different quotes. The cabinet schedule, number of finished ends, and installer’s scope matter as much as the room’s dimensions.
Use the examples as screening budgets; a measured cabinet plan and written scope are needed for a reliable price.
Assumptions: Crew-hour ranges are approximate project labor, and example totals exclude sales tax, countertops, appliances, and substantial repairs.
How long installation takes and what can delay the job
For a straightforward kitchen, removing old cabinets and installing replacements often takes two to five working days, depending on crew size and preparation. Installation can take longer when walls are uneven, floors are out of level, cabinets need scribing, or a large island requires careful alignment. The number of cabinets and amount of trim work affect labor more than room area alone.
Cabinet lead time is separate from installation time. A dealer should confirm the expected production, shipping, and delivery window for the chosen order; availability can change with finish, inventory, and shipping conditions. Scheduling an installer before the cabinets arrive can create extra costs if a crew has to reschedule or make an additional trip.
Old cabinet removal may be included in a remodeling contractor’s package, but it is not automatically included in a cabinet dealer’s installation price. Wall patching, floor repairs, plumbing disconnection, and appliance removal are also commonly excluded. Ask who handles each task and whether the quoted hours cover cleanup and disposal.
Coordinate cabinet delivery with the installer and confirm removal, wall preparation, and cleanup in writing.
Assumptions: Normal access and no structural, plumbing, or electrical work.
Where to reduce a cabinet quote without sacrificing fit
Keeping the existing kitchen footprint is one of the most reliable ways to control cost. Moving a sink, range, or refrigerator can trigger plumbing, electrical, and flooring work outside the cabinet quote. Reusing appliance locations and avoiding unnecessary wall changes helps keep a cabinet replacement closer to its original scope.
Choose standard cabinet widths where they fit and limit special-order trim, glass doors, and decorative panels to the most visible areas. A few organizers may improve daily use without outfitting every cabinet with premium accessories. Compare the price of drawer bases and pullouts against simpler shelf storage before finalizing the order.
Measure and prepare carefully, but do not order cabinets from rough measurements alone. A professional field measurement can prevent costly errors involving out-of-square corners, door clearance, or appliance openings. Ask at least two dealers or installers to price the same cabinet schedule and installation tasks; a lower quote may exclude delivery, disposal, or finished ends.
If existing cabinet boxes are sound, replacing doors or hardware may cost less than a full replacement, although it will not correct poor layout or damaged boxes. A refacing quote should be compared with the complete replacement total, including labor and any new interior storage.
Control the layout and compare itemized bids before cutting essential storage or installation work.
Assumptions: Repairs or refacing depend on cabinet-box condition, replacement door availability, and local labor pricing.