The Kreg 720 Pro pocket-hole jig typically costs $170-$230 in the United States, with an average price near $200 before tax. The final price depends on retailer discounts, included accessories, shipping, and whether the listing is for the 720PRO system rather than the less-equipped Kreg 720 jig.
For a standard new 720PRO kit, budgeting about $200-$220 before tax is reasonable. Check the listing contents and model number before comparing prices, since similarly named Kreg jigs can differ in included equipment.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Kreg 720PRO system | $170 | $200 | $230 | New kit; price varies by sale and retailer |
| Kreg 720 jig | $120 | $150 | $180 | Check whether the docking station is included |
| Shipping and tax | $0 | $12 | $30 | Shipping may be free; sales tax depends on location |
| Common add-on bits or screws | $10 | $25 | $60 | Depends on bit, screw, and accessory selection |
What a Kreg 720PRO costs as a complete pocket-hole kit
The 720PRO is a benchtop pocket-hole jig system intended for repeatable woodworking joints. A typical new kit price is $170-$230, with $200 a useful planning estimate. That range assumes standard retail availability and the core 720PRO package; limited-time promotions or bundles can move the price outside it.
The 720PRO generally includes the jig and a docking station, plus setup and clamping components. Package contents can change, so the product listing matters more than the product photo. Assumptions: new U.S. retail purchase, standard package, no sales tax or delivery charge included.
The complete-system price is usually higher than the standalone Kreg 720 price because the PRO package adds workflow equipment. A used or open-box unit may cost less, but buyers should check that the clamp, drill bit, stop collar, and docking components are present and usable.
How the jig, docking station, and accessories shape the quote
A retail price is mostly the jig system itself; there is typically no installation labor. The table below gives practical budget ranges for the purchase and common additions. Accessory prices vary by size and package, and may already be included in a particular bundle.
| Purchase component | Typical price | What changes the cost | Budget note |
|---|---|---|---|
| 720PRO jig and clamp | $130-$180 | Retailer and package contents | Core drilling and clamping equipment |
| Docking station and supports | $25-$60 | Included bundle or separate purchase | Useful for repeat work and longer boards |
| Drill bit or replacement bit | $10-$30 | Bit type and replacement versus spare | Confirm compatibility before buying |
| Pocket-hole screws | $8-$25 | Quantity, length, and finish | Choose length for stock thickness and use |
| Tax and delivery | $0-$30 | Location and retailer policy | Compare checkout totals, not shelf prices |
Labor is normally a do-it-yourself expense rather than a required service charge. If a shop or contractor is making the joints, ask for a separate quote; rates depend on setup, quantity, and whether the work is part of a larger woodworking job.
Why board thickness and kit contents change the price
The tool’s sticker price is not the only budget variable. A woodworker starting from scratch may need screws in several lengths, a compatible drill bit, and supports for handling long stock. Someone who already owns compatible accessories may stay close to the kit price.
Stock thickness affects setup and screw selection: the 720 system is designed for common board thicknesses around 1/2-1 1/2 inches. Working outside that range or switching thickness frequently can require extra setup checks and different fasteners, though it does not automatically change the jig’s purchase price. Large projects may also benefit from more screws or an additional support accessory.
Before paying extra for a bundle, compare its included parts with the exact thicknesses and screw lengths the project needs. A kit with accessories that will not be used may cost more without improving the finished work.
Is a 720PRO bundle worth more than the Kreg 720?
The standalone 720 jig commonly runs about $120-$180, while the 720PRO system is often $170-$230. The difference generally reflects the added docking station and related setup pieces. For occasional small projects, a basic jig may be adequate; frequent drilling or repeated work on larger panels can make the more complete package useful.
Compare the included parts rather than assuming every 720 listing is equivalent. A low-priced 720 may omit the docking station or other components that appear in a 720PRO listing. Conversely, a discounted bundle can be a better deal if it includes accessories that would otherwise be purchased separately.
Where U.S. shoppers may see different 720PRO prices
Online and big-box listings often cluster around the same broad retail range, but promotions, shipping, and local inventory create differences. A sale can put a new kit roughly 5%-15% below a typical $200 price; specialty woodworking retailers may list it near full price but offer a bundle or local pickup.
Regional variation is usually less important than retailer discounts and delivery. Sales tax varies by state and locality, while shipping can add roughly $0-$20 for a small tool purchase. Compare final checkout totals and verify that the seller is offering the 720PRO model, not a 720 or a different Kreg jig.
Three realistic checkout budgets for the Kreg jig
Basic sale purchase: A 720PRO listed at $179 with free shipping and no extra accessories totals $179 before tax. This suits a buyer whose existing screw supply and compatible bits cover the project.
Typical new-kit purchase: A $200 kit plus $15 in screws and an estimated $14 in tax comes to about $229. The tax estimate assumes a 7% rate and excludes shipping.
Expanded setup: A $225 kit, $25 in screws, and a $20 replacement or spare bit totals $270 before tax. This example fits a buyer stocking up for several projects, not a required cost for using the jig.
How to lower the 720PRO purchase total
Compare the complete package against the standalone 720 and price any missing docking equipment separately. Check reputable retailer promotions and open-box listings, but inspect open-box contents and return terms. Buying only the screw lengths needed for the current project can also avoid an unnecessary accessory bundle.
For a one-time project, borrowing or renting a compatible jig may cost less than buying the PRO system, if a local tool library or rental shop carries one. For repeat use, compare total checkout prices and avoid paying for duplicate bits or supports. The most dependable savings come from matching package contents to actual project needs, not choosing the lowest headline price.