A new Kubota LX2980 snowblower attachment typically costs about $5,000-$7,500 before installation, while a complete dealer-installed setup can reach $7,000-$10,500. The final price depends on the tractor’s front-mount hardware, dealer labor, freight, local availability, and whether the quote includes a subframe, drive components, and installation.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| LX2980 blower attachment | $5,000 | $6,250 | $7,500 | New attachment; options and dealer pricing vary |
| Front-mount parts | $1,000 | $1,700 | $2,500 | Subframe, drive shaft, and required tractor-specific hardware |
| Dealer installation | $400 | $800 | $1,300 | Assumes compatible tractor and ordinary setup |
| Complete installed setup | $6,800 | $8,750 | $11,000 | Before sales tax; higher quotes may include added equipment |
| Used blower only | $2,500 | $4,000 | $5,800 | Condition, age, and included parts drive the spread |
What a new LX2980 blower typically costs
The LX2980 is a front-mounted, two-stage snowblower attachment sold for compatible Kubota LX tractors. A reasonable U.S. planning range for the blower itself is $5,000-$7,500, with roughly $6,250 as a practical midpoint. This is an estimate, not a published fixed national price; dealers may quote a package or sell the blower and mounting parts separately.
Budget approximately $7,000-$10,500 for a properly equipped, dealer-installed new setup. That estimate assumes a standard blower, compatible tractor, necessary front-mount components, ordinary assembly, and no major tractor modifications. Sales tax, delivery, and optional accessories can push the invoice higher.
The LX2980 is generally identified as a 63-inch blower. Its purchase price should not be confused with the cost of a complete snow-removal system. A tractor that lacks the proper front hitch or drive hardware may need additional components, and those parts can account for a substantial share of the total.
Assumptions: U.S. dealer pricing, standard new equipment, normal access to the tractor, and no unusual freight or retrofit work.
How the 63-inch blower quote breaks down
Ask the dealer to separate the attachment, tractor-specific mounting kit, labor, and delivery. Comparing itemized quotes helps reveal whether a lower advertised price excludes essential parts. The figures below are planning ranges; part compatibility must be confirmed against the tractor’s model and configuration.
| Quote item | Typical price | What changes the charge | Common scope |
|---|---|---|---|
| LX2980 blower | $5,000-$7,500 | Dealer discount, availability, and included accessories | 63-inch two-stage attachment |
| Subframe and hitch parts | $600-$1,500 | Tractor model and existing front-mount equipment | Frame, brackets, and mounting hardware |
| Drive components | $400-$1,000 | Required PTO or driveline configuration | Model-specific shaft or drive parts |
| Assembly and installation | $400-$1,300 | Shop rate, setup complexity, and delivery preparation | Fitment, adjustment, and operational check |
| Freight or delivery | $100-$600 | Distance, shipment size, and dealer pickup | Local delivery or equipment freight |
| Tax and miscellaneous fees | $0-$900 | State and local tax, plus dealer charges | Varies by location and taxable items |
The most useful comparison is the complete compatible package, not the attachment price alone. A quote that includes mounting hardware and setup may be a better value than a lower blower-only price. Confirm whether the stated total includes tax, freight, and any required front hitch or PTO parts.
Installation labor commonly represents several shop hours. At an illustrative dealer rate of $100-$175 per hour, 4-8 hours would equal $400-$1,400 before any separate delivery charge. Actual billed time depends on whether the tractor already has compatible components and whether the dealer completes setup before delivery.
Which tractor specs and snow conditions raise the price?
Compatibility is the first cost driver. LX tractors can differ by model, year, and installed equipment, so a dealer should verify the tractor serial number and attachment configuration before quoting parts. A mismatch can require additional brackets, a different driveline, or a change in installation scope. If the tractor already has the correct front-mount equipment, the parts bill may be lower by several hundred dollars or more.
Blower width also matters. The LX2980’s nominal 63-inch working width is intended to suit the compatible tractor platform. Buyers considering a narrower or different model should compare the full attachment system, rather than assuming another width will fit without changes. A width mismatch may leave the tractor tires outside the cleared path or reduce maneuverability in tight spaces.
Snow depth and driveway length affect operating needs more than the attachment’s sticker price. A 100-foot paved drive with routine 6-12-inch snowfalls is a different workload from a 500-foot gravel lane facing repeated 18-inch storms. Longer routes, drifting, and wet heavy snow can make tire chains, ballast, or a rear counterweight more relevant; those items may add roughly $150-$700, depending on the equipment and whether it is already owned.
Terrain and storage conditions can also change the quote. Steep grades may require traction equipment or careful setup, while a narrow garage opening can make the 63-inch attachment awkward to store. Ask whether the price includes skid shoes, cutting-edge parts, chute controls, and any protective equipment supplied with the specific unit. Optional or replacement items should be listed separately, not assumed to be included.
Used LX2980 prices compared with new dealer packages
A used LX2980 attachment commonly falls around $2,500-$5,800, depending on age, wear, completeness, and local demand. A clean unit with its mounting hardware and sound auger components can command more than a blower-only listing. A damaged or incomplete attachment may appear cheaper but can become expensive once missing parts, repairs, transport, and fitment are counted.
Before paying, inspect the auger and impeller for bent or cracked components, check the gearbox for leaks or abnormal play, and examine the chute, skid shoes, and cutting edge. Ask the seller for the exact tractor models used with the blower and verify the part numbers with a Kubota dealer. A used price near $5,000 may be reasonable when the equipment is complete and in strong condition, but less attractive if it needs a costly driveline or subframe.
Compare used and new prices on an installed, ready-to-use basis. For example, a $3,500 used blower plus $1,000 in missing hardware, $600 in repairs, and $300 in transport totals $5,400 before installation. A new package may cost more upfront but can include dealer fitment and a warranty, reducing uncertainty about compatibility and condition.
A rear-mounted snowblower or a front blade can be a lower-cost alternative for some tractor owners, but neither is a direct substitute in every situation. A rear blower may require driving in reverse and its own mounting system; a blade moves snow rather than throwing it, which can limit capacity when banks build up. Compare complete equipment costs and how the machine will handle the actual driveway before choosing by initial price alone.
Dealer labor, delivery, and setup charges to check
Dealer labor usually covers mounting, driveline setup, adjustments, and a basic operation check. A straightforward installation may take about 4-8 hours, while retrofitting a tractor without the required components can take longer. At $100-$175 per hour, extra work can add $100-$350 for each additional 1-2 hours, so the quote should state whether labor is fixed or billed by time.
Delivery fees vary with distance and equipment handling. Local transport may cost $100-$300, while longer-distance freight or special equipment delivery can reach $300-$600 or more. Some dealers reduce or waive delivery when the blower is purchased with a tractor or other equipment. Pickup can save money, but the buyer needs a suitable trailer, safe loading equipment, and a way to secure the attachment.
Request a written list of included setup work before authorizing installation. Confirm whether the dealer checks chute rotation, verifies clearances, adjusts skid shoes, and explains attachment removal and storage. If a tractor is already at the dealer for seasonal service, scheduling the blower installation with that visit may avoid a separate transport charge or duplicate shop setup.
Ask whether the estimate covers troubleshooting if the attachment does not operate correctly after delivery. A quote that says “installation” without describing the work can leave room for added charges. It is also useful to clarify whether warranty support applies to both the blower and dealer installation, and whether warranty travel or pickup fees are separate.
Why regional dealer quotes vary across the U.S.
Snowbelt demand can tighten inventory before winter, especially in the Northeast, Great Lakes states, and mountain regions. In areas with heavy snowfall, dealer pricing and delivery availability may be less flexible during peak season. A planning allowance of 5%-15% above a comparable off-season quote is reasonable when stock is limited or equipment must be sourced quickly, though individual dealer offers vary.
Rural buyers may face higher freight or travel charges, while metro areas can have more dealers competing on package pricing. Freight distance, inventory, and labor rates often matter more than a broad regional label. For a $8,500 installed package, a 5%-15% difference represents about $425-$1,275, making two or three itemized local quotes worthwhile.
Compare quotes from dealers that confirm the same tractor fitment and included parts. A lower price from a dealer farther away may lose its advantage after delivery, setup, or service travel is added. Ask each seller to quote the same blower, mounting components, installation scope, and tax treatment so the regional comparison is meaningful.
Three realistic LX2980 purchase budgets
A basic new setup for a tractor that already has compatible mounting equipment could total about $6,000-$7,700 before tax. This might include a $5,500-$6,600 blower and $400-$800 for setup and delivery. The lower end assumes a dealer discount and little additional hardware; it is not a guaranteed price for every location.
A typical complete dealer package may run $8,000-$9,500 before tax. For example, a $6,200 attachment, $1,300 in mounting and drive components, $700 in installation, and $250 delivery totals $8,450. This scenario assumes ordinary fitment and no unusual tractor modifications.
A retrofit or peak-season purchase can exceed $10,000 before tax. One example is a $7,200 blower, $2,000 in required parts, $1,100 in labor, and $500 freight, totaling $10,800. The premium reflects added equipment and logistics rather than the blower alone. Buyers should ask the dealer to explain any quote substantially above this range by itemizing parts, hours, and delivery.
How to lower the LX2980 price without cutting needed equipment
Get written, itemized quotes before choosing a dealer. Confirm the same blower model, mounting kit, drive components, setup, delivery, and tax assumptions in each estimate. This prevents a low attachment-only number from being compared against a complete installed package. If the tractor already has compatible components, provide the dealer with its model, year, serial number, and current attachments to avoid paying for duplicate hardware.
Buying before peak snowfall demand can improve availability and reduce rush-related expense. Ask about preseason ordering, in-stock units, and package discounts, but verify the delivery date and whether the quote is firm. A discount is less useful if the attachment arrives after the first major storm or if freight and assembly are excluded.
Consider doing only tasks that are safe and explicitly approved by the dealer. For example, transporting the tractor to the shop may reduce delivery expense if the buyer has proper hauling equipment. Do not skip required fitment, setup, or operational checks to save labor; incorrect driveline or hitch installation can cause equipment damage and may complicate warranty support.
Keep the configuration focused on the property. Price chains, ballast, spare cutting edges, and other accessories separately, then buy only what the driveway, terrain, and expected snow require. A package can be convenient, but accessories already owned or unnecessary for the site should not be counted as essential to the LX2980 purchase.
Finally, compare a complete used unit with the cost of a new dealer package. A used attachment may offer meaningful savings if it includes the correct mounting parts and passes inspection. If it needs major repairs or missing model-specific hardware, the apparent discount can disappear. Include repair estimates, transport, and installation in the used-equipment budget before deciding.