Kurt Bangerter pool cost depends on the pool design, construction material, yard conditions, and included equipment. A reasonable Utah planning range is about $60,000-$130,000 for a professionally installed in-ground pool, with simpler projects potentially below that and custom concrete builds costing more; a company-specific price requires a site visit and written quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed in-ground pool | $60,000 | $95,000 | $160,000+ | Typical residential project; custom features raise totals |
| Fiberglass shell project | $55,000 | $80,000 | $110,000 | Depends on shell size, access, and decking |
| Concrete or gunite pool | $75,000 | $115,000 | $180,000+ | Custom shapes and finishes add expense |
| Pool equipment package | $4,000 | $8,000 | $15,000 | Pump, filter, sanitation, and heating options |
What a Utah in-ground pool quote may include
Publicly available pricing may not establish a fixed rate for a specific builder or property. For early budgeting, a standard in-ground pool with basic circulation equipment and modest surrounding hardscape commonly lands around $60,000-$110,000. A larger custom pool, upgraded finish, heater, or extensive patio can move the bill to $120,000-$180,000 or higher.
Use these figures as regional planning estimates, not a confirmed Kurt Bangerter bid. Installed totals vary with season, access, soil, design, and what the contract counts as complete. A quote should spell out pool dimensions, finish, equipment, decking, electrical work, and exclusions.
Assumptions: Utah residential property, standard access, ordinary soil, and midrange equipment; landscaping and major retaining work may be extra.
How excavation, shell, and labor shape the bill
Pool estimates combine several trades and materials. The table gives broad installed-project allowances; categories can overlap or shift depending on whether the builder subcontracts work or bundles it into one contract.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Excavation and haul-off | $5,000-$15,000 | Per project | Rock, tight access, and disposal distance |
| Shell and interior finish | $25,000-$65,000 | Per pool | Material, dimensions, shape, and finish grade |
| Plumbing and electrical labor | $8,000-$20,000 | Per project | Pipe runs, panel capacity, and equipment location |
| Decking and coping | $8-$30 per sq ft | Installed area | Concrete, pavers, stone, and layout |
| Permits and inspections | $500-$3,000 | Per project | City rules and required safety features |
Ask whether excavation, startup, safety barriers, and final cleanup are included. A low base price may omit patio area, fencing, utility upgrades, or landscaping restoration.
Which pool size and yard conditions change pricing most
Dimensions are a major cost driver because a larger pool needs more excavation, shell material, plumbing, and finish. Moving from a compact 12-by-24-foot layout to a 16-by-32-foot pool can add roughly $10,000-$25,000, depending on construction type and decking. A deep end, tanning ledge, integrated spa, or custom steps can add thousands more.
Site conditions can be just as important. Rocky ground, a slope requiring retaining walls, or machine access narrower than about 8 feet may add $3,000-$20,000 or more. A long equipment run beyond roughly 50 feet may also increase pipe, wiring, and labor costs.
Compare the assumed site work as carefully as the pool dimensions. Utah excavation and installation labor is commonly budgeted at about $60-$110 per worker-hour, with total hours varying substantially by design and access.
Fiberglass and concrete pools at comparable sizes
Fiberglass generally has a faster installation and a factory-made shape, while concrete or gunite allows more customization but takes more on-site labor. For a roughly 14-by-28-foot pool, fiberglass installation may run about $55,000-$95,000, while a comparable concrete project may be around $80,000-$140,000 before major landscaping or premium features.
Compare the finished scope rather than shell prices alone. Include coping, decking, filtration, heater, startup, and warranty terms in both bids. A lower shell price may not represent a lower completed-project cost.
How long installation takes and where labor adds up
Once permits and scheduling are settled, a straightforward fiberglass installation may take about 2-6 weeks on site. Concrete construction often takes 6-12 weeks or longer because forming, steel, shotcrete, curing, plumbing, and finish work require multiple stages. Weather, inspections, and subcontractor availability can extend either schedule.
Labor can represent roughly 25%-40% of a completed pool project, though the share depends on material and included site work. Get a written schedule and confirm which delays or temporary site services could trigger added charges.
Extra charges for heating, fencing, and difficult access
Common add-ons include a gas or heat-pump heater at about $3,000-$8,000 installed, an automatic cover at $10,000-$20,000, and a safety fence at $2,000-$8,000 depending on length and gate requirements. A salt system may add approximately $1,500-$3,500. Utility-panel upgrades and drainage work are property-specific and should be priced separately.
Keep allowances for excluded work visible in the budget. Demolition, rock removal, retaining walls, landscaping, and extra concrete can add $5,000-$30,000 or more when conditions are challenging.
Utah location and season can shift the final estimate
Labor and delivery costs tend to be higher in dense metro areas than in some rural locations, while remote delivery or limited contractor availability can reverse the difference. As a planning allowance, compare bids expecting about a 5%-15% location-related variation within Utah; unusual access or long travel distances may exceed it.
Spring and early summer demand can tighten schedules, while booking during a contractor’s slower period may improve availability but does not guarantee a discount. Permit requirements and safety rules are local, so confirm current city or county requirements rather than relying on a statewide allowance.
How to trim a pool quote without cutting essentials
Keep the footprint and shape simple, choose a standard finish, and limit specialty features until the base installation is priced. Reducing decking from 800 to 500 square feet, for example, saves about $2,400-$9,000 at $8-$30 per square foot, before any changes to coping or drainage.
Request at least three itemized bids based on the same dimensions and inclusions. Ask contractors to price optional heaters, covers, lighting, and upgraded finishes separately. Complete compatible landscaping or patio work later only when doing so will not create warranty, drainage, or access problems.