A La Cornue hood typically costs about $8,000-$25,000 for the hood itself, with a complete installed project often reaching $10,000-$32,000 or more. The final price depends on the hood model and finish, ventilation equipment, duct route, labor, and whether the kitchen needs electrical or cabinet changes.
For a typical U.S. kitchen with standard access, budgeting around $18,000-$22,000 installed is a reasonable starting point. Custom finishes, long duct runs, and high-cost metro labor can push the quote higher.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| La Cornue hood unit | $8,000 | $15,000 | $25,000+ | Model, width, finish, and configuration affect price |
| Ventilation insert or blower | $1,000 | $2,500 | $5,000+ | May be priced separately from the decorative hood |
| Installation labor | $1,200 | $2,500 | $5,000 | Higher for structural changes or difficult access |
| Ductwork and electrical | $500 | $1,800 | $4,000+ | Depends on route, length, and existing services |
| Typical installed project | $10,000 | $20,000 | $32,000+ | Excludes major kitchen remodeling |
What La Cornue hood buyers typically pay
La Cornue hood pricing is generally in the luxury-appliance category. A decorative hood commonly falls around $8,000-$25,000, while unusually specified or custom-finished models may exceed that range. Some quotes combine the hood shell and ventilation package; others list the blower or insert separately, so buyers should confirm what the unit price includes.
For a straightforward replacement with a compatible duct and no cabinet work, total project costs may start near $10,000-$14,000. A new installation with a dedicated blower, duct modifications, electrical work, and professional mounting is more likely to total $16,000-$25,000. A custom installation with masonry, cabinetry, or a long duct route can pass $30,000.
Assumptions: U.S. pricing in USD, standard residential kitchen, professional installation, and no major structural reconstruction.
Separate the hood purchase price from the complete installed price before comparing quotes. A low equipment quote may omit ventilation, shipping, mounting hardware, or finish-related charges.
How hood, blower, and ductwork shape the quote
A detailed estimate should identify the decorative hood, ventilation equipment, installation, and any related kitchen work. La Cornue models and configurations differ, and sellers may package components differently. The following ranges are planning estimates rather than a manufacturer price list; confirm current model availability and inclusions with the dealer.
| Quote component | Typical price range | What changes the charge | Common unit basis |
|---|---|---|---|
| Decorative hood | $8,000-$25,000+ | Model, dimensions, finish, and order configuration | Per hood |
| Blower or insert | $1,000-$5,000+ | Capacity, control type, and whether included | Per unit |
| Duct and fittings | $500-$2,500 | Route, diameter, elbows, and exterior termination | $25-$75 per linear ft, plus fittings |
| Mounting and installation | $1,200-$5,000 | Wall condition, weight, access, and crew needs | $75-$150 per labor hour |
| Electrical changes | $300-$1,500 | New circuit, switch location, and wiring access | Per project |
| Removal and disposal | $150-$600 | Existing hood size and disposal requirements | Per job |
Delivery, taxes, and any required permits may appear as separate line items. Ask whether the price includes crating or freight for the hood, which can be substantial for a large or fragile finish. If a contractor supplies the ventilation package, check that its capacity and controls are compatible with the selected hood and range.
The clearest quote lists each major component and states what is excluded. That makes it easier to compare two proposals without mistaking an incomplete equipment price for a lower project cost.
Which hood width, finish, and blower capacity raise the price
Hood dimensions are a major product-price driver. A compact configuration may cost less than a wide hood sized for a large range, while larger dimensions can also require more powerful ventilation and heavier mounting. For planning, compare the proposed hood width with the cooking surface: a hood wider than the range may capture more smoke, but cabinet and wall dimensions can limit the choice.
Finish and detailing can shift the price as well. A standard finish may cost less than a special color, custom trim, or coordinated design requested to match a range. Confirm whether the quoted finish is part of the listed model or treated as an upgrade. Changes made after an order is placed can add cost or delay delivery.
Ventilation requirements depend on the cooking equipment, hood design, and local code. A blower around 600-900 cubic feet per minute may suit some residential arrangements, while a high-output range or a long, restrictive duct route may require a different specification. Higher capacity can increase equipment and installation expense and may trigger make-up-air requirements under local rules.
Estimate example: increasing a duct route from 8 ft to 20 ft can add roughly $300-$1,200 in duct materials and labor, depending on access and finish repairs.
Verify the hood size, blower rating, and duct plan together rather than pricing them as independent choices. A mismatch can lead to rework, noise, or insufficient capture.
How regional labor and delivery affect U.S. quotes
Labor and delivery vary by location. In large coastal metros and other high-cost markets, installation and related trade work may run about 15%-35% above a national planning estimate. Smaller cities and rural areas can come in 5%-20% below typical metro labor, although a specialist may need to travel and add a service or mileage charge.
Freight deserves special attention for a premium, oversized hood. A dealer’s price may include delivery to the home, delivery to the curb, or only shipment to a local terminal. Inside delivery, stair carries, limited truck access, or scheduling coordination can add several hundred dollars or more. Confirm who receives and inspects the hood, and what happens if freight damage is found.
Regional differences also reflect permit rules and the age of the home. Older buildings may need duct rerouting, electrical corrections, or wall repairs that are not included in a standard installation quote. In areas with strict ventilation requirements, permit fees and make-up-air work can increase the project total.
Compare local installed quotes, not just the hood’s advertised price. A modest equipment discount can be outweighed by freight, travel, or complex site labor.
How long professional hood installation takes
A simple replacement can take about 4-8 hours when the existing duct, electrical supply, and mounting location are suitable. A new installation commonly needs 1-2 working days, especially if the crew has to open a wall or ceiling, install ductwork, make electrical changes, and patch or paint surfaces.
One or two installers may handle mounting, but a larger or heavier hood may require additional workers or a separate delivery crew. Electricians, cabinet installers, or drywall contractors may be scheduled independently. Multiple trades increase coordination time and can add labor minimums even when each task is brief.
Typical installation labor rates fall around $75-$150 per hour, although a specialist or high-cost metro contractor may charge more. Contractors may instead quote a fixed project rate. Ask whether the estimate includes travel, setup, removal of the old unit, final testing, and cleanup. Labor estimate: 10-16 hours × $75-$150 per hour equals approximately $750-$2,400 before specialty work or minimum charges.
Installation hours rise most when the duct route or mounting surface changes. A site visit before ordering can reveal those conditions and reduce change orders.
What removal, duct changes, and code work can add
Replacing an existing hood is usually less costly if the new unit fits the current opening and can use the existing duct. Removing a standard hood may cost $150-$600, with extra charges for heavy equipment, difficult access, or disposal. Surface repairs after removal are often billed separately.
New ductwork may cost approximately $25-$75 per linear foot for common materials and installation, before complicated routing, exterior caps, or wall repairs. A long run with several elbows may require higher-capacity equipment or a revised route. Moving the duct through finished cabinetry or a finished ceiling can add carpentry and finish labor.
Local building rules can affect both the equipment and the installation. Depending on the jurisdiction and project scope, a permit may cost roughly $50-$500, but some areas charge more or require additional inspections. High-capacity ventilation may require make-up air, adding approximately $1,000-$4,000 or more when ducting, controls, and construction are involved.
Ask the installer to identify code-related work as a separate estimate line. Requirements depend on local rules and the planned system, so a national price range cannot replace a local code check.
Three installed La Cornue hood budgets by project scope
These examples show how equipment, labor, and site conditions combine. They are illustrative U.S. estimates, not guaranteed prices for a particular model. Exact quotes depend on dealer pricing, selected configuration, delivery terms, and local contractor rates.
| Project | Hood and ventilation | Labor and site work | Estimated total |
|---|---|---|---|
| Direct replacement, 36-in. setup, existing duct | $10,000-$14,000 | 6-8 hours; $1,200-$2,000, including removal | $11,500-$17,000 |
| New 48-in. installation, 12-ft duct route | $14,000-$21,000 | 12-16 hours; $2,500-$4,000, plus electrical | $17,000-$27,000 |
| Custom finish, long duct route, make-up air | $18,000-$28,000+ | 20-30 hours; $5,000-$10,000+ for trades and construction | $25,000-$40,000+ |
In the first scenario, the biggest savings come from reusing suitable ductwork and avoiding cabinet changes. The middle scenario reflects a larger hood and new duct labor but assumes ordinary access. The highest scenario includes a premium configuration and broader mechanical work; unusually difficult framing or finish restoration can increase it further.
Use the scope behind each example to judge whether a quote is comparable. A $20,000 proposal may be reasonable for a new duct route but high for a direct replacement that reuses the existing system.
How to lower a La Cornue hood project price
Keep the hood location and duct route unchanged when the existing arrangement is safe, functional, and compatible with the selected equipment. Relocating the hood can involve duct rerouting, cabinet work, electrical changes, and wall repair. Before approving a replacement duct plan, ask whether the current route can meet the installation requirements.
Choose a standard available finish and configuration if they meet the design needs. Special-order finishes and custom detailing may raise the hood price or extend lead time. Avoid paying for a larger blower solely as a precaution; ask the installer to size it for the range, duct design, and applicable rules.
Get at least two itemized installation quotes and compare the same scope: model, ventilation equipment, freight, removal, duct length, electrical, permits, and finish repair. Confirm whether the contractor has included taxes and a contingency for concealed conditions. If the range and hood are purchased together, ask whether coordinated delivery or a single installation visit reduces separate service charges.
Prepare the work area by clearing access and confirming measurements before delivery, but leave wiring, duct fabrication, and heavy mounting to qualified trades. A damaged premium hood or incorrect opening can cost more than any savings from improvised installation.
The most controllable savings usually come from avoiding unnecessary duct relocation, custom options, and duplicate labor visits. Keep a contingency of about 10%-15% for a new installation, especially when walls or ceilings will be opened.