La Cornue ranges typically cost about $10,000-$90,000 before delivery and installation, with the model, width, finish, cooking configuration, and customization driving the quote. A professionally installed purchase can add several thousand dollars, especially when the kitchen needs electrical, gas, cabinetry, or ventilation work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| CornuFé range | $10,000 | $14,000 | $19,000 | Price varies with width, finish, and options |
| Château range | $35,000 | $60,000 | $90,000 | Custom configurations can exceed typical estimates |
| Delivery and installation | $1,000 | $3,500 | $8,000+ | Access, hookups, and kitchen modifications affect the total |
| Installed project total | $11,000 | $63,500 | $98,000+ | Illustrative range across entry and premium models |
La Cornue Range Prices by Model and Width
Model choice makes the largest difference to the purchase price. U.S. retail quotes for a CornuFé commonly fall around $10,000-$19,000, while Château ranges often run about $35,000-$90,000 before delivery, tax, or installation. These are planning ranges, not a manufacturer-fixed national price list; authorized dealers quote the specific configuration and current availability.
The CornuFé 90 is generally the lower-cost La Cornue option, with a 36-inch-class footprint and a more standardized configuration. A typical budget is $10,000-$14,000. A wider CornuFé 110, approximately 43 inches wide, may cost $13,000-$19,000 depending on finish, cooking setup, and options. Confirm the exact dimensions and utilities with the dealer before comparing quotes.
Château pricing rises quickly with width and customization. A Château 90, around 36 inches wide, may be quoted at roughly $35,000-$50,000; a Château 120, around 48 inches, can reach $50,000-$70,000; and a Château 150, around 60 inches, often falls near $65,000-$90,000 or more. Some bespoke finishes or configurations can exceed these ranges.
Assumptions: U.S. retail pricing before tax, delivery, installation, and kitchen alterations; final dealer quote depends on configuration and availability.
What a La Cornue Quote Includes for Delivery and Setup
Separate the appliance price from the work required to put it into service. Dealer quotes may include some combination of freight, inside delivery, assembly, hookup, and warranty handling, but inclusion varies. Ask for an itemized written quote so an attractive appliance price does not conceal a costly delivery or installation allowance.
| Quote component | Typical range | Pricing basis | What changes the charge |
|---|---|---|---|
| Range purchase | $10,000-$90,000+ | Per configured unit | Model, width, finish, cooking options |
| Freight and delivery | $500-$2,500 | Per delivery | Distance, stairs, lift-gate, appointment |
| Installation labor | $500-$2,000 | Per job | Hookups, leveling, access, crew needs |
| Utility or cabinet work | $500-$5,000+ | Per project | New circuits, gas line, counters, ventilation |
| Removal and disposal | $150-$600 | Per old appliance | Disconnection and haul-away rules |
Taxes are additional and depend on the delivery location and local rules. A range that requires a new dedicated circuit, gas-line alteration, or cabinet changes can shift the installed total substantially. Confirm whether the quote covers the required range hood or ventilation changes; it may not.
Installation labor is often priced as a job rather than a simple hourly service. When billed by time, a planning rate of $75-$150 per hour per installer can help assess the labor allowance, but licensed trades may charge separate service-call or minimum fees.
How Château Width and Cooking Options Change the Price
Width, specification, and finish determine whether a Château quote stays near its entry range or climbs into bespoke territory. Moving from a 36-inch Château 90 to a 48-inch Château 120 can add roughly $15,000-$25,000 to the appliance price; stepping up to a 60-inch Château 150 can add another $15,000-$25,000 or more. Exact differences depend on the selected configuration.
Cooking layouts matter as much as exterior appearance. Buyers can select combinations of ovens, gas burners, induction elements, griddles, and other cooking surfaces, depending on model availability. Specialized or less-common layouts may require a custom order and can change both price and lead time. Ask the dealer to list each selected module rather than relying on a base-model figure.
Color and trim choices may also change the quote. A standard finish can keep the estimate closer to the model’s lower range, while custom colors, metallic details, or bespoke design requests can add several thousand dollars. Get the precise finish specification in writing, including whether it is included in the quoted base price.
Installation conditions are another major variable. A 90-centimeter-class model may fit a standard opening, but wider ranges need adequate cabinet space, countertop clearance, and ventilation. Confirm appliance dimensions, door swing, clearances, and utility requirements before ordering; correcting a finished kitchen can cost more than making adjustments during a remodel.
How Much Delivery and Range Installation Add
Budget $1,000-$8,000 or more beyond the appliance for delivery, placement, and installation-related work. A straightforward delivery and hookup in an accessible kitchen may be near the lower end. A long carry, stairs, restricted doorway, crane or lift service, or separate electrical and gas upgrades can push the total much higher.
A common installation visit takes several hours when the opening and utilities are ready. A basic placement and connection may involve a two-person crew for roughly 2-4 hours; complex delivery or coordination with electricians and plumbers can require multiple visits. These estimates do not include substantial remodeling or ventilation replacement.
Ask whether the installer is qualified for the range’s fuel and electrical requirements, and whether the price includes leveling, anti-tip measures, connection materials, and testing. Some dealers require use of their delivery or installation network. A low independent labor quote is not comparable if it excludes required parts, safe connection, or removal of packaging.
For a remodel, schedule delivery after cabinetry, flooring, and utilities are ready, but leave enough time to inspect the appliance before the installer arrives. A failed delivery caused by a narrow doorway or unfinished kitchen can create redelivery fees and delay charges. Verify access dimensions with the delivery provider before paying a deposit.
La Cornue Pricing in Coastal and Smaller U.S. Markets
Location can shift the delivered project price by about 5%-20% compared with a well-served major metro market. Dealer availability, freight distance, local labor rates, and access to trained installers influence the final quote. This is a budgeting allowance rather than a fixed regional surcharge; a distant market may have one dealer quote that differs sharply from another.
Large coastal metros may have higher installation labor and more expensive permitting or remodeling, though several dealers can make quote comparison easier. In a smaller city or rural area, labor rates may be lower, but freight, limited installer availability, or a required travel charge can offset the difference. A difficult urban delivery may also cost more due to parking restrictions, stairs, or timed access.
Compare the same model, width, finish, and delivery scope across dealers. Request the appliance subtotal, freight, inside placement, installation, utility work, tax, and any local service fee separately. A quote that is 10% lower on the appliance can become more expensive after freight and installation are included.
Availability can affect timing as well as cost. A standard configuration in stock may avoid extended storage or coordination fees, while a special-order finish or custom layout can involve a longer wait. Ask whether the quote is valid through the expected delivery date and whether freight or price adjustments are possible before shipment.
Three La Cornue Quotes for Different Kitchen Projects
These examples show how model and site scope create very different installed budgets. They are illustrative U.S. estimates before sales tax, and actual dealer pricing should be confirmed for the exact configuration.
| Scenario | Appliance | Delivery and labor | Site work | Estimated total |
|---|---|---|---|---|
| CornuFé 90, ready kitchen | $12,000 | $1,200 | $300 | $13,500 |
| CornuFé 110, minor utility work | $16,000 | $1,800 | $1,500 | $19,300 |
| Château 120, custom finish and remodel | $62,000 | $3,500 | $4,500 | $70,000 |
In the first example, the existing opening, ventilation, and hookups are assumed to meet requirements; the delivery includes placement and a basic connection. The second assumes a wider CornuFé and limited electrical or gas work. The third allows for a premium Château configuration, more involved delivery, and coordinated kitchen modifications.
For a labor cross-check, a two-person crew working 4 hours at a combined rate of $150-$250 per crew-hour would cost about $600-$1,000 before delivery fees or trade work. Actual local billing practices vary, and a quote may instead use a fixed installation charge. Use the formula only as a comparison tool, not as a substitute for a written scope.
CornuFé or Château for a Lower La Cornue Price
A CornuFé usually delivers the lower purchase price, while a Château offers more configuration and customization at a substantial premium. At roughly $10,000-$19,000, the CornuFé is often a more predictable appliance purchase. Château pricing commonly starts around $35,000 and can approach or exceed $90,000 as width and bespoke choices increase.
Compare the cooking functions actually needed, not just the brand name or visual finish. If the required size and cooking layout are available in a CornuFé, it may avoid paying tens of thousands more for Château options that will not be used. Conversely, custom dimensions, design preferences, or a particular cooking arrangement may justify evaluating a Château quote.
Also compare the installed cost with other premium ranges of similar width and fuel type. A lower-priced substitute may still require costly cabinetry, ventilation, or utility changes. Include those project expenses in each estimate and compare warranty terms, service access, and parts availability rather than comparing appliance prices alone.
Where Buyers Can Trim a La Cornue Project Budget
The most controllable savings usually come from choosing a simpler configuration and avoiding avoidable kitchen changes. Select the smallest width that accommodates the cooking needs and kitchen layout. Standard finishes and readily available configurations may cost less than custom colors or special-order specifications, although dealers must confirm the difference for a particular order.
Before ordering, have the installer or kitchen professional verify the opening, clearances, fuel supply, electrical circuit, and ventilation. Correct measurements can prevent cabinet rework, a failed delivery, and return or restocking disputes. Keep the existing compliant hookups when practical, but do not skip required upgrades or use unqualified labor to reduce the quote.
Compare at least two itemized dealer estimates when possible. Match the model, width, finish, configuration, freight, installation, warranty, and delivery timing line by line. Ask whether the quote includes old-range removal, packaging disposal, connection parts, and final testing. A lower headline price may omit several hundred or several thousand dollars of work.
Coordinate the range with a planned kitchen remodel rather than making a separate trip for cabinet, counter, or ventilation changes. Bundling work can reduce repeat service visits, but only when the scope and responsibility for each trade are clear. Request written change-order prices before work begins so added labor or materials do not become an open-ended expense.